search for: kt400

Hello, I resolved my echo issue using grandstream/estara etc etc sip phones and wcfxo interfaces from digium. I swapped out my via kt400 based msi kt4vl motherboard for an asus p4pe? i845? based motherboard and the echo has completly gone away along with aggressive suppressor option in the makefile. I hope this helps others. Brian J. Schrock Anistone Technologies, LLC 6926 Avery Rd. Dublin, OH 43017 Phone: 614-798-9106

...00000000fec01000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffff0000 - 0000000100000000 (reserved) (XEN) System RAM: 511MB (523836kB) (XEN) Xen heap: 10MB (10668kB) (XEN) PAE disabled. (XEN) DMI 2.2 present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 KT400 ) @ 0x000f7490 (XEN) ACPI: RSDT (v001 KT400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 (XEN) ACPI: FADT (v001 KT400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 (XEN) ACPI: DSDT (v001 KT400 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000 (XEN) Found...

...canceler in the makefile and turned on and off aggressive suppressor etc. etc. etc. tried 32,16,128, and 256 bridgetaps and I can get it reduced to only a few seconds on the intro of the call and after silence, as well as a really annoying beep every so often, and some audio artifacts. I am using KT400 VIA based motheroards MSI KT4VL and x100P and the new tdm400p. Calls within the pbx sound great something to really be proud of (congrats to all of you developers), but going out to the PSTN is extremely annoying. Who do I pay and how much to get rid of this extrordinarily annoying echo from sip -...

Hello everybody! I have some problems with my Astersk. I have an analogical OpenVox card and A Billion ISDN card (with mISDN). I load the modules with modprobe zaptel and modprobe wctdm. When I run ztcfg -vv I have this: Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: No

> Brian> Hello, I resolved my echo issue using grandstream/estara > etc etc Brian> sip phones and wcfxo interfaces from digium. I > swapped out my Brian> via kt400 based msi kt4vl motherboard for an > asus p4pe? i845? Brian> based motherboard and the echo has > completly gone away along Brian> with aggressive suppressor option > in the makefile. I hope this Brian> helps others. I'm curious if you tried experimenting with any setting...

...O-APIC-fasteoi VIA8237 NMI: 0 Non-maskable interrupts LOC: 891 Local timer interrupts TRM: 0 Thermal event interrupts SPU: 0 Spurious interrupts ERR: 0 MIS: 0 [root at oh1mrr /]# lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0c.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) 00:0d.0 Ethernet controller: Realtek Sem...

Why standard Centos 5.2 kernel does not have a module "pata_via." I have an old motherboard and IDE drive. The standard kernel does not work. Kernel include a module "pata_via" only in centosplus. It is a bug?

Hi, does anyone have any idea whether VIA VT6102 "Rhine II" and Realtek RTL 8100 Ethernet chips are supported by FreeBSD? The hardware list for supported chips does list 'VT86C100A "Rhine II"' but according to VIA website VT86C100A is actually just "Rhine" and it is obviously not the same chip. (The 'VT3043 "Rhine I"' chip mentioned in

All, I have a problem with a new Seagate hard disk. The problem occurs when i go to install CentOS, i insert the cd and start the boot up process, when it gets to the section where it detects the hard disks, the driver is seems crashes, the message it produces complains about no one caring about a interrupt on IRQ11. The hard disk is a Seagate 200GB 8MB SATA150 NCQ drive, on a SilliconImage

...system I have is configured thusly: AMD Duron 1200 (I have frequency restrictions in this application, and must stay below 1.3GHz or must be above 2.0GHz, and the 1200 fits nicely in our interference plan; besides, I was given the chip, and it's fast enough for the application). Soyo DRAGON KT400 motherboard, 512MB DDR RAM (DDR266). Silicon Image SATA interface card. Machine boots CentOSPlus 4.1 kernel (2.6.9-11.106.unsupported) perfectly fine UNTIL I plug in a Maxtor SATA drive into the drive slide I have in the machine. Drive and slide work perfectly fine at home with a Gigabyte KT...

...#39;t found at all!! Literally from DMESG: ata0-slave: ATA identify retries excedeed and sometimes it doesn't find my DVD too , with the message : ata1-slave: ATA identify retries excedeed so, I'm without CD and DVD :cry: What I can do?? My system is: Athlon XP 2400+ MSI KT4 Ultra (KT400) MoBo The CDRW and DVD are attached to the two slave of the two ATA channels Help me please , I've tried to remove the DVD in order to try to get CDRW recognised , but it doesn't work anyway Thanks for help

https://bugs.freedesktop.org/show_bug.cgi?id=75569 Priority: medium Bug ID: 75569 Assignee: nouveau at lists.freedesktop.org Summary: [nv34] [v3.14-rc3] DMA_PUSHER get 0x00029044 put 0x000184d0 state 0x80000040 (err: INVALID_CMD) push 0x00000000 QA Contact: xorg-team at lists.x.org Severity:

...79545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> on hostb0 agp0: aperture size is 32M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem 0xd0000000-0xd7ffffff,0xe0000000-0xe000ffff at device 0.0 on pci1 em0: <Int...

...ed (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: VIA Technologies, Inc. Product Name: KT400-8235 Version: Serial Number: 12 UUID: 00000000-0000-0000-0000-000000000001 Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: AOpen Product Name: AK77-8XN Version: 918A710301 Serial Number: I0500031JE13 Handle 0x0003, DMI type 3, 17 bytes...