Displaying 14 results from an estimated 14 matches for "kneadtoknow".
2020 Oct 30
2
Can't get CyberPower UPS to work with Raspberry Pi 4
On Oct 29, 2020, at 2:44 PM, Robert Stocker <kneadtoknow at gmail.com> wrote:
>
> Sorry for the delay. Here are my outputs, but first a quick question: am I right in thinking I can change the name of my ups simply by editing ups.conf? That script I ran from the Pi forum used that name, and I don't care for it. Thanks again for your help.
&g...
2020 Oct 29
2
Can't get CyberPower UPS to work with Raspberry Pi 4
On Oct 27, 2020, at 2:45 PM, Robert Stocker <kneadtoknow at gmail.com> wrote:
>
> Thanks so much for all the help! It looks like at present I've at least got a working configuration that I need to test and fine-tune, am I interpreting this correctly?
Yes. If you're good with the default NUT behavior of shutting down when the UPS signal...
2020 Oct 31
1
Can't get CyberPower UPS to work with Raspberry Pi 4
On Oct 31, 2020, at 8:42 AM, Robert Stocker <kneadtoknow at gmail.com> wrote:
>
> I successfully changed my UPS name and after a reboot, things seems to be well on their way. Do I need to worry about this line in the upsc results:
>
> Init SSL without certificate database
https://askubuntu.com/questions/468632/nut-ups-and-ssl-certificat...
2020 Oct 25
4
Can't get CyberPower UPS to work with Raspberry Pi 4
This was very helpful for me, thank you!
On Sat, Oct 24, 2020 at 9:06 AM Charles Lepple <clepple at gmail.com> wrote:
> The easiest way to tell if upsd is working is to run "upsc -l" on the same
> system, which will list the NUT UPS names, and then run e.g. "upsc mge"
> (replacing "mge" with the name returned by "upsc -l")
>
Here was the
2020 Oct 31
0
Can't get CyberPower UPS to work with Raspberry Pi 4
...UPS name and after a reboot, things seems to be
well on their way. Do I need to worry about this line in the upsc results:
Init SSL without certificate database
On Thu, Oct 29, 2020, 10:15 PM Charles Lepple <clepple at gmail.com> wrote:
> On Oct 29, 2020, at 2:44 PM, Robert Stocker <kneadtoknow at gmail.com> wrote:
> >
> > Sorry for the delay. Here are my outputs, but first a quick question: am
> I right in thinking I can change the name of my ups simply by editing
> ups.conf? That script I ran from the Pi forum used that name, and I don't
> care for it. Thanks...
2020 Oct 24
0
Can't get CyberPower UPS to work with Raspberry Pi 4
On Oct 23, 2020, at 11:06 AM, Robert Stocker <kneadtoknow at gmail.com> wrote:
>
> Thanks again for your patience. I'm still learning how to deal with systemctl myself (and starting from, I'm sure, a much lower level of understanding), so if I've neglected to restart or start something, please let me know.
>
> I made the chang...
2020 Oct 26
0
Can't get CyberPower UPS to work with Raspberry Pi 4
On Oct 25, 2020, at 11:52 AM, Robert Stocker <kneadtoknow at gmail.com> wrote:
>
> Init SSL without certificate database
> battery.charge: 100
> battery.charge.low: 10
> battery.charge.warning: 20
> battery.mfr.date: CPS
> battery.runtime: 15690
> battery.runtime.low: 300
> battery.type: PbAcid
> battery.voltage: 24.0
>...
2020 Oct 26
2
Can't get CyberPower UPS to work with Raspberry Pi 4
On Oct 26, 2020, at 9:01 AM, I wrote:
>
>> battery.voltage.nominal: 24
>
> I don't have the citation handy, but I think another user reported that the battery.voltage returned by the UPS is a constant 24.0 V, regardless of the actual battery voltage.
Here's what I was thinking of:
2020 Oct 29
0
Can't get CyberPower UPS to work with Raspberry Pi 4
...n in progress
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery test
On Wed, Oct 28, 2020 at 9:40 PM Charles Lepple <clepple at gmail.com> wrote:
> On Oct 27, 2020, at 2:45 PM, Robert Stocker <kneadtoknow at gmail.com> wrote:
> >
> > Thanks so much for all the help! It looks like at present I've at least
> got a working configuration that I need to test and fine-tune, am I
> interpreting this correctly?
>
> Yes. If you're good with the default NUT behavior of shutt...
2020 Oct 23
2
Nut-upsuser Digest, Vol 184, Issue 8
...rPower UPS to work with Raspberry Pi 4
> (Charles Lepple)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 21 Oct 2020 20:57:53 -0400
> From: Charles Lepple <clepple at gmail.com>
> To: Robert Stocker <kneadtoknow at gmail.com>
> Cc: Nut-upsuser at alioth-lists.debian.net
> Subject: Re: [Nut-upsuser] Can't get CyberPower UPS to work with
> Raspberry Pi 4
> Message-ID: <95352690-77C2-4F22-A521-2D5483CB1775 at gmail.com>
> Content-Type: text/plain; charset="utf-8"...
2020 Oct 26
2
Can't get CyberPower UPS to work with Raspberry Pi 4
On Monday 26 October 2020 09:01:31 Charles Lepple wrote:
> On Oct 25, 2020, at 11:52 AM, Robert Stocker <kneadtoknow at gmail.com>
wrote:
> > Init SSL without certificate database
> > battery.charge: 100
> > battery.charge.low: 10
> > battery.charge.warning: 20
> > battery.mfr.date: CPS
> > battery.runtime: 15690
> > battery.runtime.low: 300
> > battery.type: Pb...
2020 Oct 21
1
Can't get CyberPower UPS to work with Raspberry Pi 4
I've searched the listserv archive, to no avail, so I hope I'm not
duplicating a previous problem. I am anxious to get this working, so I'm
open to uninstalling what I have and starting over.
One note which may not be meaningful is that this UPS pre-dates the
Raspberry Pi I've got connected to it, and I used to use it with the
CyberPower software, which requires logging in with a
2020 Oct 27
0
Can't get CyberPower UPS to work with Raspberry Pi 4
Thanks so much for all the help! It looks like at present I've at least got
a working configuration that I need to test and fine-tune, am I
interpreting this correctly?
On Mon, Oct 26, 2020 at 9:47 AM Charles Lepple <clepple at gmail.com> wrote:
> On Oct 26, 2020, at 9:01 AM, I wrote:
> >
> >> battery.voltage.nominal: 24
> >
> > I don't have the
2020 Oct 20
2
Is there a new way to search the listserv archives?
I see the link here
<https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser>, but
clicking it results in a 404. Before I waste everyone's time posting my
question, I really wanted to search to see if it's been solved already.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: