search for: kawakami

...IP image on my tftp server like the first ones did. i keep getting the error on the phone 'Defaulting CM to TFTP server' like it isn't seeing the *.bin on the server. are you supposed to have on of those for each phone? would be like cisco et al to do something like that. TIA Jason Kawakami

...e coming across but * is either missing the first digit consistantly. This seems to me to have something to do with start timers or inter-digit dtmf timers or something. I have even tied 2 * together each with t100 cards and have the same problem. Not sure how to proceed, any suggestions? Jason Kawakami

...gress=yes rxgain=0.0 txgain=0.0 group=1 immediate=no context=incoming signalling=fxs_ls channel=1 zaptel.conf fxsls=1 fxoks=2 fxoks=3 loadzone = us defaultzone=us [dialout] exten => _9NXXXXXX,1,StripMSD,1 exten => _NXXXXXX,2,Dial(Zap/1/w${EXTEN}) exten => _NXXXXXX,3,Hangup Thanks Jason Kawakami www.optellabs.com Salt Lake City, UT

...ther route 01144[0-9]* that I thought would match 01144X. and send the call to the UK but the script is matching 01144207108???? With the first route. Can someone smarter than me help with some samples? Please? If I can get one for 1NXXN. and 01144. I should be able to figure the rest out. Jason Kawakami www.optellabs.com Salt Lake City, UT

...ll center agent but getting this on the CLI May 24 20:34:20 WARNING[1209214400]: channel.c:1783 ast_request: No channel type registered for 'IAX2[2001@2001]' using AddQueueMember as the login mechanism and that seems to work but * will not deliver to the IAX2 extension. any ideas? Jason Kawakami -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040524/81d2cb8c/attachment.htm

...st picked one up for my lab and the speakerphone works great but I am only getting one way audio (incoming) from the handset. Since the speakerphone works fine, I can't think of any config. reasons why the handset wouldn't other than a faulty handset. Any thoughts or experiences? Jason Kawakami Technical Sales Open Telephony Labs, LLC 801.527.2284 www.optellabs.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040804/f3afac3b/attachment.htm

is there something that needs to be set up to make the 'called' and 'callers' buttons work on this phone? all i get is the backlight to switch on and off. Jason Kawakami

...r voicemail retrieval, leave out a pin in voicemail.conf to make it easy [local] Exten=_NXXXXXX,1,Dial(zap/outgoing channel/${EXTEN}) [long_distance] Exten=_1NXXNXXXXXX,1,Dial(zap/outgoing channel/${EXTEN}) Note that I haven't done the first example but the second one is duck soup. Jason Kawakami www.optellabs.com Salt Lake City, UT

I need to be able to dial a long distance provider that uses an access number and an auth code. I would like to be able to program this so that the user can dial 8 and then the long distance number, asterisk will hopefully do everything in the middle. The sequence to accessing the provider is on my traditional phone speed dial as: * Dial local access number * Wait 5 seconds * Dial the auth

I am new to Asterisk. I am trying to ascertain the hardware setup (and associated cost) I would need. The documentation in the wiki (and elsewhere) is extensive but I am somewhat lost in product model numbers. Hence I need an initial recommandation to work on. 15 incoming lines, 25 employees). Initial scenario is to use * as a plain old PBX. I need voicemail, ability to transfer calls, ... I

I'm thinking about using asterisk as an IVR system with an existing avaya index system. I've got 2x PRI 30 lines coming in to the Index, and I have 4 spare PRI cards in the Index. I was thinking about using a QUAD PRI card from Digium and having the calls come into the Index then transfer to Asterisk for IVR then back to the Index. That way if we get 60 inbound calls we'd in

...r where we are currently) -you will probably have issues with that many zap cards in one server. Look at the IAXy as an ATA for the fax machines (be careful, faxing over IP can be FUN!)or look at having a couple of machines sitting next to one another that are trunked together. Good Luck! Jason Kawakami www.optellabs.com Salt Lake City, UT

I would like to integrate * with an existing Altigen PBX. I want to spend as little money as possible to make it happen. My main goal is to inexpensively connect a branch office to the phone system. Eventually I would like to replace the Altigen system with an Asterisk server so I don't want to spend any money on Altigen hardware. Currently the Altigen has analog interfaces with a couple

...0 channels from * into > the isdn pri line ? T-1/PRI is a standard that in the US = 24 channels and in more advanced countries (note I am in US, a citizen, etc. not trying to make political statement here) = 32 channels. you cannot define more than those channels on any individual span. Jason Kawakami

BR C.

What experience can be shared about installing and running the OrderlyQ application? I have a bunch of queues set up and want to start adding some additional apps and this one looked promising but I have very little java experience and it doesn't seem to be running properly. Jason Kawakami -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050629/89830b74/attachment.htm

We are in the process of ordering a Voice PRI to plug into Asterisk. Of course we will be buying a card from Digium for this. Question is this, there seem to be MANY options technically when ordering this PRI (in the US) but since this is the first time ordering a voice circuit I am clueless as to what options we need. Any clues would be helpful or maybe something has already been written

Hello All, Just looking some comments from gurus about this proprietary systems and phones: Inter-Tel Eclipse2 Model name: IP PhonePlus I did not find anything useful or reasonable about their products on their website or even in Internet.... except sales. -- Thanks and regards, Vasyl Rublyov

...s? Talk about total cost of ownership not total cost of purchase. In the end, * really isn't a good play for the 4x8 KSU in a dental office. You need to find the thing that the customer wants to do differently than the NEC's or Nortel's or the Avaya's are going to let them. Jason Kawakami

After our department went to using *, I've had several inquiries about doing VoIP for my entire organization (Small county). We have ~10 locations with various links in between (Mostly p2p T1s, some Frame (1.544mbps commit), some ISDN, some VPN over 768kbit internet) Right now we're using several NEC Electra Elite systems, and 2 Nortel Meridian systems. In one of the main locations we have