search for: jildent

I recently read about the following new technologies from Digium. Has anyone tried the new HPEC or knows when it will be available? TDM800P and HPEC The TDM800P is an 8-port analog telephony interface card, so it fills the gap between Digium's 4-port and 24-port cards. Analog phones and POTS lines are going to be with us for some time, and demand for support for them remains high. The

Can anyone shed some light on this, I have two asterisk boxes using heartbeat for failover. Sip traffic works just fine with the virtual IP but IAX does not. For example on my servers one server has the following: eth0 = 192.168.1.95 eth0:0 = 192.168.1.2 the other server has: eth0 = 192.168.1.220 if the first "Master" server goes down the second server will take that virtal IP for

Hi, How would one activate/deactivate hardware echo cancellation on the TE406 card? Can it be done per channel? I'm going to run TE406 in the following scenario: ISDN -> TE406 -> PABX I understand from Steve Underwood's site that echo cancellation is not good for faxes (and they do that themselves). So what I want to do and bypass echo cancellation for selected extensions before

...angup on bad channel 0/14 on span 1 Sep 8 10:36:07 WARNING[13375]: chan_zap.c:7651 pri_fixup_principle: Call specified, but not found? Sep 8 10:36:07 WARNING[13375]: chan_zap.c:8701 pri_dchannel: Hangup on bad channel 0/14 on span 1 -- B-channel 0/14 restarted on span 1 Boris Bakchiev Jildent Pty Ltd Tel: + 61 3 8080 5898 Fax: +61 3 9811 4716 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050907/e3fc0fa3/attachment.htm

Hi, Anyone using SpanDSP with Digium TDM o TE cards to receive and email Faxes? Thanks, Javier Ergas R. Director General de Tecnolog?a Pibix Telefon?a IP http://www.pibix.cl -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060615/ed77e5d1/attachment.htm

Following is the last few lines of output when i try to launch Asterisk:- [app_zapscan.so] => (Scan Zap channels application) == Registered application 'ZapScan' [app_saycountpl.so] => (Say polish counting words) == Registered application 'SayCountPL' [func_cut.so] => (Cut out information from a string) == Registered custom function CUT == Registered custom

Hi, I just read a pressrelease from VON that Digium will soon be releaseing a couple of new cards. What got me interested was: "The TE420P and TE415P support 128ms of G.168 (2002)-compliant echo cancellation across their entire 128 channels." Does anyone know when thease will be released and what they will cost when released? Thanks!

Hi, I've installed an TE406p, asterisk1.2 on tyan opteron board. After installation there is no interrupts from TE406p. Is this board stable? Should i change * version to 1.0.9? Regards, Jason __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Hi Can TDM400P detect polarity reversal on FXO module? We have C.O. lines that reverse polarity on Answer and release. Thank You This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you

Hi, I'm unable to load wct4xxp module for TE406P card. I've compiled 2.6.13-rc6, got latest CVS (as of today) of zaptel, but when I try to load the module I get this: kobject_register failed for Unified t4xxp/t2xxp driver (-13) [kobject_register+53/73] kobject_register+0x35/0x49 [bus_add_driver+62/153] bus_add_driver+0x3e/0x99 [driver_register+55/58] driver_register+0x37/0x3a

It works out that name "Unified t4xxp/t2xxp driver" is not accepted anymore by 2.6.13 kernel. Need to remove "/" for it to load properly > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Boris Bakchiev > Sent: Monday, 15 August 2005 18:17 > To:

Hi, I would like to utilise immediate=yes to monimise the delay that simle switch introduces. When I set this option, ${EXTEN} is not populated so I I'm unable to do some prepocessing of calls. Is there a way to populate or retreive EXTEN from a channel that's been setup with immediate=yes option? Thanks -------------- next part -------------- An HTML attachment

> Are there any advantages/disadvantages to using tmpfs as opposed to the > following method: Matt, Its simple. To quote the docs, "tmpfs lives entirely in the kernel's caches" It will shrink and grow to accommodate the files that currently on the filesystem. So if you allocate 10GB for your /tmp but only use 500MB it will only use 500MB of RAM. Think of the time your server

HI, Does anyone know if there is a PCI-X 4 port PRI cards available on the market? If so, have anyone used it and how reliable they were? Any help is appreciated...

Its slow :) It will give you some delays but it will not be noticeable (most voice files are 5-100kb, so it should be ok... But writing to them.. Not sure.. It should be ok as well I'm guessing as kernel will provide some caching (since you have G and not GS it has less ram, so maybe chaching is not an option) Best would be to get WL-500G. It has a USB port so you can plug a USB memory stick

The simplest solution and the one already implemented in linux, tmpfs. It would be best to allocate 4-8GB to tmpfs on /tmp and let the kernel do the work it was designed to do. And you would not be limited to PCI bus speeds. The DDR2800 is about 12GB/sec. Some would say "overheads, etc, etc". Agreed, even at 95% loss (doubtful) you still get higher badwitch then PCI bus/hard rive could

I had CC readers going over the internet (with pings over 80ms) connected to Linksys PAP2. It was only successful once every 3 attempts. I had 100% reliability when it was connected on LAN. Timing is an issue, if you doing everything on LAN it should not be a problem. Just make sure you use G.711 protocol. > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com

The registry's are stored in DB. Just export your database with 'database show' Schedule it with cron to run every 5 minutes or so. You can do that with -rx command line switch for asterisk. Send the file across to other node and pipe it through awk/perl/cut or whatever you like and import it when you bring the other node up. You will have to stop and start asterisk I think. I