search for: iwill

.../Win98 box for files transfer. No problem found) Static IP address Samba_Server (RH7.3) 192.168.0.1 Subnet Mask 255.255.255.0 WinXP 192.168.0.2 Subnet Mask 255.255.255.0 Workgroup SEC Name of Samba_Server IWILL Share folder test Name of WinXP M40G Share folder Shared On Window Exploror. SEC and M40G shown up under MSWindows Network. But IWILL disappears WinXP box ========= >ping 192.168.0.1 Pinging 192.168.0.1 with 32 bytes of data: Reply from 192....

To the Centos maintainers: We tried to install Centos 4.4 i386 (i686 / Athlon) on a Dual Opteron 254 Iwill DK8N MB, 1GB (4 x 256M) system with a 3ware 9500S-4 and 4 x 80 GB disks in a RAID 10 array. Both tries caused Centos to first kernel panic until we turned off IO-APIC in the BIOS. Both tries also only loaded the UP kernel and did not load the smp kernel on the machine. The smp kernel was not eve...

...mber of AMD64 cores supported by CentOS 4? The RedHat page https://www.redhat.com/software/rhel/configuration/ suggests that RHEL 4 AS supports up to 8 AMD64/EM64T logical cpus. Is that accurate and does it apply to CentOS 4? I see a few vendors offering boxes with 8 (dual core) CPU sockets. IWILL for one. Thanks, Tony Schreiner Boston College

...use isolinux to load memdisk. The configuration of the machine is: P4 2.0G, 512MB memory, Intel 845E motherboard, DVD-ROM and a SCSI CDWriter. Compressed images does NOT boot. Uncompressed image boot ok. However, this bootable CD works on my another machine, it is a PIII733 machine, with IWILL BP100Plus board. Both compressed and uncompressed images boot ok. -- Best regards, Softlib mailto:softlib at turbolinux.com.cn

...configuration of the machine is: srzc> P4 2.0G, 512MB memory, Intel 845E motherboard, DVD-ROM and a SCSI CDWriter. srzc> Compressed images does NOT boot. Uncompressed image boot ok. srzc> However, this bootable CD works on my another machine, it is a PIII733 srzc> machine, with IWILL BP100Plus board. Both compressed and uncompressed srzc> images boot ok. srzc> -- srzc> Best regards, srzc> Softlib mailto:softlib at turbolinux.com.cn srzc> ------------------------------ -- Best regards, Merlin mailto:softl...

.......hung.... It seems to do Hung in Real PC though the phenomenon like place tested with VMware was not Hung. There was no problem in a usual floppy disk emurate that did not use ISOLinux at all. My hardware environment is as follows. CPU Pentium3 933MHz Dual Memory DDR SDRAM 256Mbytes X 4 MB Iwill DVD-266R HDD : IBM 30G CD-ROM : All SCSI CD-ROM (TekRam DC390F Pioneer DVD-ROM, TEAC CD-R, TEAC CD-ROM) Using ISOLinux and MEMDISK 2.08, 2.09-pre12 prompt 1 default 1 ontimeout 1 display DOS.TXT timeout 300 label 1 kernel memdisk append initrd=W95DOS.GZ label 2 kernel memdisk append initrd=W98...

Hi All! I am using WineHQ 1.3.28 on Ubuntu 11.04 and I have enabled Pixel Shader Model however when installing UDK (Unreal Development Kit) an error message appears saying it is required at least Shader Model 3. I don't understand because in Windows XP I can install UDK and this error message doesn't appear. I have a NVidia 7600 Go and it supports shader model 3. In windows XP it works

We just did a fresh load on a new Windows XP Pro machine. Dual Opteron 248 Iwill DK8N Motherboard with Nvidia Gigabit Ethernet controller 1GB (4 x 256MB) Memory 3ware 7006-2 RAID Controller Dual 40GB Disks Striped ATI 7000 VE Dual Graphics controller All XP drivers installed and XP updates. Connected to a Linksys EGW008 - 8 port gigabit hub Our linux server is RH 9.0 with Sa...

...s: >srzc> P4 2.0G, 512MB memory, Intel 845E motherboard, DVD-ROM and a SCSI >CDWriter. >srzc> Compressed images does NOT boot. Uncompressed image boot ok. > >srzc> However, this bootable CD works on my another machine, it is a >PIII733 >srzc> machine, with IWILL BP100Plus board. Both compressed and >uncompressed >srzc> images boot ok. > >srzc> -- >srzc> Best regards, >srzc> Softlib mailto:softlib at turbolinux.com.cn > >srzc> ------------------------------ >-- >Best regards, > Me...

...I did have an electrical failure at my home related to > weather of which the ups powered down after 30minutes that caused one > of the raid 5T drives to become corrupted. I reformatted the drive and > rebuilt the raid with mdadm, and everything worked alot better than I > expected. Iwill only be using this system to store *.tar.gz backup files from > other systems. What should cause me to fear the USB 3.0 connection. > > #2. /etc/mdadm.conf > The tutorials I read about how to use mdadm did notinclude mdadm.conf, > and this was not created when I installedmdadm. I w...

Hi, Whats' the best motherboard you ever ran CentOS on? --------- Don't read this unless you have lots o' spare time, and please, no flamers or kook-jobs with wierd attitudes, this is just plain old hardware as it relates to centos talk -no politic or mean folks. Background (why I ask about centos-friendly hardware): As I order alot of servers, I have alot of vendors telling me