search for: ispstuff

Can anyone recommend a company that does professional Asterisk recordings for things like IVR, greetings, MOH, announcements, etc? Thanks, Waldo

...has hot >swap SATA bays so if the primary drive fails or get's corrupted anyone can >just swap drives and they will be back up just like that. I'll make remote >offsite backups as well. > >Thanks for all the help. > >-----Original Message----- >From: Tom [mailto:tom@ispstuff.com] >Sent: Saturday, February 24, 2007 5:01 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [asterisk-users] To use asterisk or proprietary hardware,that >is the question > >At 11:53 AM 2/24/2007, you wrote: > > > >Hi there, > > &gt...

Our new * server with Cisco SIP phones is now working pretty well. But we still have one problem that has not been resolved. The Cisco SIP phones have a consistent echo. It sounds like about a 500ms delay. This echo is not heard from the POTS side. It is heard when calling another SIP extension in our office. We are running 6.3 firmware on the phones. Any suggestions would be

Two minutes seems like a long time to initialize a Cisco 7960 IP phone. What times are others seeing for the load when you reboot a phone? We are running the SIP 7.4 load. Our * 1.0 stable is also our http, dhcp and tftp server. During boot, the display shows: Configuring VLAN 100 seconds TFTP SIP loads a few seconds back to Configuring VLAN the rest of the time. I am wondering if I have a

Has anyone found a high quality wireless headset that works well with Cisco 7960 IP phones on an asterisk system? I tried the vxxi offering but the sound quality was pretty bad. Since these are pricey, I don't want to sample blindly. Experience appreciated. Thanks, Tom

Running the latest * CVS and Cisco 7960G and 7940G phones with SIP 6.3 image. I have figured out how to turn on the DND feature through the Settings>Call Preferences>Do Not Disturb - Yes then Save. This puts the phone into DND On and shows a DND image above the far right soft key which you use to turn off DND. There should be a better way. An on/off toggle of the soft key that it

When we were first installing these SIP phones, the time and date was displayed on the top status line. Firmware version 6.3. Using dhcp, tftp, http, and ntp servers for configuration all on the LAN (* box). Now that we have these working with *, the time/date display is missing. Any ideas? Thanks, Tom