search for: irq5

...12 vruppert Exp $ (XEN) HVM14: HVM Loader (XEN) HVM14: Detected Xen v4.2-unstable (XEN) HVM14: Xenbus rings @0xfeffc000, event channel 3 (XEN) HVM14: System requested ROMBIOS (XEN) HVM14: CPU speed is 3392 MHz (XEN) irq.c:270: Dom14 PCI link 0 changed 0 -> 5 (XEN) HVM14: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:270: Dom14 PCI link 1 changed 0 -> 10 (XEN) HVM14: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:270: Dom14 PCI link 2 changed 0 -> 11 (XEN) HVM14: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:270: Dom14 PCI link 3 changed 0 -> 5 (XEN) HVM14: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1...

...MD Phenom(tm) II X6 1090T Processor xl dmesg shows: [...] (d6) HVM Loader (d6) Detected Xen v4.6.6-9.el7 (d6) Xenbus rings @0xfeffc000, event channel 1 (d6) System requested SeaBIOS (d6) CPU speed is 3607 MHz (d6) Relocating guest memory for lowmem MMIO space disabled (d6) PCI-ISA link 0 routed to IRQ5 (d6) PCI-ISA link 1 routed to IRQ10 (d6) PCI-ISA link 2 routed to IRQ11 (d6) PCI-ISA link 3 routed to IRQ5 (d6) pci dev 01:2 INTD->IRQ5 (d6) pci dev 01:3 INTA->IRQ10 (d6) pci dev 02:0 INTA->IRQ11 (d6) pci dev 04:0 INTA->IRQ5 (d6) No RAM in high memory; setting high_mem resource base to...

...dmesg shows: > [...] > (d6) HVM Loader > (d6) Detected Xen v4.6.6-9.el7 > (d6) Xenbus rings @0xfeffc000, event channel 1 > (d6) System requested SeaBIOS > (d6) CPU speed is 3607 MHz > (d6) Relocating guest memory for lowmem MMIO space disabled > (d6) PCI-ISA link 0 routed to IRQ5 > (d6) PCI-ISA link 1 routed to IRQ10 > (d6) PCI-ISA link 2 routed to IRQ11 > (d6) PCI-ISA link 3 routed to IRQ5 > (d6) pci dev 01:2 INTD->IRQ5 > (d6) pci dev 01:3 INTA->IRQ10 > (d6) pci dev 02:0 INTA->IRQ11 > (d6) pci dev 04:0 INTA->IRQ5 > (d6) No RAM in high me...

...) SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1) 12 channels configured. ZT_SPANCONFIG failed on span 1: No such device or address (6) Other info : When i look in the BIOS i see the card is on IRQ5 alone When i use "cat /proc/interrupts" i see nothing on IRQ5 zaptel.conf : ... loadzone=nl defaultzone=nl #fxsks=1 span=1,1,3,ccs,ami span=2,1,3,ccs,ami span=3,1,3,ccs,ami span=4,1,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 DISCLAIMER...

...rror 6 opening device (XEN) PCI add Virtual Function 04:1a.0 (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v4.1.0.rc2.pre (XEN) HVM1: CPU speed is 2660 MHz (XEN) HVM1: Xenbus rings @0xfeffc000, event channel 2 (XEN) irq.c:258: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:258: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:258: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:258: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci...

Hello all Xen devels, I''m writing howto''s in brazilian portuguese language about Xen-3.3.0 stubdom, pv-grub and others configurations. Following what is written in xen-3.3.0/stubdom/README, I tried start a HVM but without success. When I start the virtual machine calling ''xm create hvmtest'' command, in a few seconds the virtual machine is dead (see

...9/device/vbd/5632 (XEN) HVM18: HVM Loader (XEN) HVM18: Detected Xen v4.3-unstable (XEN) HVM18: Xenbus rings @0xfeffc000, event channel 4 (XEN) HVM18: System requested ROMBIOS (XEN) HVM18: CPU speed is 2400 MHz (XEN) irq.c:270: Dom18 PCI link 0 changed 0 -> 5 (XEN) HVM18: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:270: Dom18 PCI link 1 changed 0 -> 10 (XEN) HVM18: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:270: Dom18 PCI link 2 changed 0 -> 11 (XEN) HVM18: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:270: Dom18 PCI link 3 changed 0 -> 5 (XEN) HVM18: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1...

...N) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f3000008 (XEN) HVM1: pci dev 03:0 INTA->IRQ11 (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c201 (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f4000000 (XEN) HVM1: pci dev 04:0 INTA->IRQ5 (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading Cirrus VGABIOS ... (XEN) HVM1: Loading ACPI ... (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-c8003: VGA BIOS (XEN) HVM1: d0000-d5603: VMXAssist (XEN) HVM1: e9000-e916a: SMBIOS tables (XEN) HVM1: ea000-eb0ef: ACPI tables (XEN) HVM1: f00...

...requested SeaBIOS (XEN) [2013-07-17 19:10:12] HVM17: CPU speed is 3200 MHz (XEN) [2013-07-17 19:10:12] HVM17: Relocating guest memory for lowmem MMIO space disabled (XEN) [2013-07-17 19:10:12] irq.c:270: Dom17 PCI link 0 changed 0 -> 5 (XEN) [2013-07-17 19:10:12] HVM17: PCI-ISA link 0 routed to IRQ5 (XEN) [2013-07-17 19:10:12] irq.c:270: Dom17 PCI link 1 changed 0 -> 10 (XEN) [2013-07-17 19:10:12] HVM17: PCI-ISA link 1 routed to IRQ10 (XEN) [2013-07-17 19:10:12] irq.c:270: Dom17 PCI link 2 changed 0 -> 11 (XEN) [2013-07-17 19:10:12] HVM17: PCI-ISA link 2 routed to IRQ11 (XEN) [2013-07-17...

...HVM18: HVM Loader (XEN) HVM18: Detected Xen v4.3-unstable (XEN) HVM18: Xenbus rings @0xfeffc000, event channel 4 (XEN) HVM18: System requested ROMBIOS (XEN) HVM18: CPU speed is 2400 MHz (XEN) irq.c:270: Dom18 PCI link 0 changed 0 -> 5 (XEN) HVM18: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:270: Dom18 PCI link 1 changed 0 -> 10 (XEN) HVM18: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:270: Dom18 PCI link 2 changed 0 -> 11 (XEN) HVM18: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:270: Dom18 PCI link 3 changed 0 -> 5 (XEN) HVM18: PCI-ISA link 3 r...

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part. Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20080812/04e0e065/attachment-0001.pgp

We created a 64bit SLES11 SP1 guest, and then used a script to change memory (using mem-set command) periodically (in 1 second): set 1G, set 2G, set 1G, set 2G, and so on. After a few minutes, we encountered QEMU exit due to SIGBUS error. Below is the call trace captured by gdb: The call trace: Program received signal SIGBUS, Bus error. 0x00007f94f74773d7 in memcpy () from /lib64/libc.so.6 (gdb)

...HVM1: Loading ROMBIOS ... (XEN) HVM1: 8972 bytes of ROMBIOS high-memory extensions: (XEN) io.c:157:d32767 hvm_dpci_eoi:: device 2 intx 0 (XEN) HVM1: Relocating to 0x3fffac00-0x3fffcf0c ... done (XEN) irq.c:222: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:222: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:222: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:222: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ...

Hello, I read in the announce of Xen 3.2.0 released that it has "preliminary support for a wider range of bootloaders in fully virtualised (HVM) guests, using full emulation of x86 ''real mode''" . I''d like to know what is the level of the emulation of x86 ''real mode''? I ask that because I tried to install OpenSuse 10.3 (I used the iso file

...]: apic_id 13, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x0c] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 12, version 17, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ5 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists. Total pages: 133120 Kernel command line: ro root=/dev/VG00/VG_root Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done...

Hi, after some time without FreeBSD I installed 7.1 on an IBM Thinkpad T30 (with ZFS root on encrypted geli, works great). Config is: FreeBSD hasking.alashan.nongo 7.1-STABLE FreeBSD 7.1-STABLE #3: Thu Feb 5 21:10:45 CET 2009 root@hasking.alashan.nongo:/usr/obj/usr/src/sys/HASKING i386 I tried using my ath based D-Link DWL G650, which still seems to have some issues in regard to interrupt

...when xm-create the guest: ------------------------------------- (XEN) HVM4: HVM Loader (XEN) HVM4: Detected Xen v4.1.2-OVM (XEN) HVM4: CPU speed is 3060 MHz (XEN) HVM4: Xenbus rings @0xfeffc000, event channel 9 (XEN) irq.c:264: Dom4 PCI link 0 changed 0 -> 5 (XEN) HVM4: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:264: Dom4 PCI link 1 changed 0 -> 10 (XEN) HVM4: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:264: Dom4 PCI link 2 changed 0 -> 11 (XEN) HVM4: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:264: Dom4 PCI link 3 changed 0 -> 5 (XEN) HVM4: PCI-ISA link 3 routed to IRQ5 (XEN) HVM4: pci...

...Detected Xen v3.1.0 (XEN) HVM20: Writing SMBIOS tables ... (XEN) HVM20: Loading ROMBIOS ... (XEN) HVM20: 9100 bytes of ROMBIOS high-memory extensions: (XEN) HVM20: Relocating to 0xfffac00-0xfffcf8c ... done (XEN) irq.c:210: Dom20 PCI link 0 changed 0 -> 5 (XEN) HVM20: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:210: Dom20 PCI link 1 changed 0 -> 7 (XEN) HVM20: PCI-ISA link 1 routed to IRQ7 (XEN) irq.c:210: Dom20 PCI link 2 changed 0 -> 10 (XEN) HVM20: PCI-ISA link 2 routed to IRQ10 (XEN) irq.c:210: Dom20 PCI link 3 changed 0 -> 11 (XEN) HVM20: PCI-ISA link 3 routed to IRQ11 (XEN) HVM2...

...------ (d6) HVM Loader (d6) Detected Xen v4.4-unstable (d6) Xenbus rings @0xfeffc000, event channel 4 (d6) System requested SeaBIOS (d6) CPU speed is 2661 MHz (d6) Relocating guest memory for lowmem MMIO space disabled (XEN) irq.c:270: Dom6 PCI link 0 changed 0 -> 5 (d6) PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:270: Dom6 PCI link 1 changed 0 -> 10 (d6) PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:270: Dom6 PCI link 2 changed 0 -> 11 (d6) PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:270: Dom6 PCI link 3 changed 0 -> 5 (d6) PCI-ISA link 3 routed to IRQ5 (d6) pci dev 01:3 INTA->IRQ10 (d6)...

...ne LABEL dos KERNEL rom-dos.bss # Add the following line to append for TS-3300 or TS-5300 Rev C or older # hdb=none hdc=none hdd=none hde=none hdf=none hdg=none hdh=none hdi=none hdj=none hdk=none hdl=none # for TS-9500 with Compact Flash as IDE2 and VGA as console: #1) add jumper for IRQ5 on TS-9500 on TS-3300 or TS-5300 only #2) add "ide1=0x170,0x376,5" to APPEND line, remove "hdc=none" if present #3) change console=ttyS1 to console=tty1 #NOTE: your logins are dependant on /etc/inittab not syslinux.cfg