search for: ippp0

Hello! I''ve got the following setup: ippp0 (isdn), ppp0 (adsl), eth1 (internal lan), eth0 (nic dedicated to the adsl modem) Firewall rules: Default 2.4. iptables (everything set to accept) except: iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE iptables -t nat -A POSTROUTING -o ippp0 -j MASQUERADE Routing Table: Default gw is set t...

...oint-to-Point Protocol over Ethernet (PPPoE) or Point-to-Point Tunneling Protocol (PPTP) in which case the External Interface will be a ppp interface (e.g., ppp0). If you connect via a regular modem, your External Interface will also be ppp0. If you connect via ISDN, your external interface will be ippp0. If your external interface is ppp0 or ippp0 then you will want to set CLAMPMSS=yes in /etc/shorewall/shorewall.conf. -------- unquote -------------------------------------- The point I am confused about is this: If my DSL isp (SBC) uses pppoe for connection, what do I put in /etc/shorewall...

Hello all :) While trying to bind to 0.0.0.0 having lo0, eth0 and ippp0 up no matter whether on- or offline, i get this: sshd[4518]: error: getnameinfo failed sshd[4518]: fatal: Cannot bind any address. It seems sshd tries to get reverse-resolved the ippp0's address. Is there a configuraiotn fault on my behalf? Did i misunderstand the way sshd works? Shouldn'...

...PAE). Two questions: 1. for which the fcpci-kernel-modules from atrpm-Repo are useful? 2. Whats about channel bundling? Does CentOS bundling automaticly on every established connection (if it is selected in Network-Configuration) or is it only set/unset with the isdnctrl addlink/removelink ippp0 command? Thats very important because there is no flat-rate on this ISDN-Connection. I intend the use of channel bundling only for remote-access The "simple" user on the connected window-workstations shall not use channel-bundling for surfing. (ISDN is on the server with samba / squid)...

Hi all, hi Guus, in july 2004 i received an e-mail from you concerning the way a packet takes across a (tinc)vpn: > They are forwarded from eth0 to tap0, but the kernel doesn't know that > tinc is forwarding them from tap0 to ippp0. So, the UDP and TCP > packets that tinc sends will be seen by the OUTPUT chain instead of > the FORWARD chain. At the other end, the received UDP and TCP packets > will be seen by the INPUT chain. When tinc sends the packets to tap0, > they will be forwarded to eth0 and then you should...

...econfigure (all other settings are OK): 2), 3), 9) and maybe 7), 11), 14) # 2.) # Which is the interface that points to the internet/untrusted networks? # # Enter all the network devices here which are untrusted. # # Choice: any number of devices, seperated by a space # e.g. "eth0", "ippp0 ippp1 eth0:1" # FW_DEV_EXT="eth1" # # 3.) # Which is the interface that points to the internal network? # # Enter all the network devices here which are trusted. # If you are not connected to a trusted network (e.g. you have just a # dialup) leave this empty. # # Choice: leave empty...

...sk+chan_capi answers the calls. However if I try to use my old isdnutils apps by loading a i4l compatibility layer then I have the following problems: - if I use the diva2i4l module and start the isdnutils (debian sid) subsystem: isdn4linux apps seem to work fine, I can dial-in, dial-out, use ippp0; only vboxgetty has a problem: 24-Apr 18:43:21 <J> Reading modem input (3 secs timeout)... 24-Apr 18:43:21 <D> Waiting for "OK|VCON"... Oops! 24-Apr 18:43:21 <E> Modem returns unneeded command "ERROR". 24-Apr 18:43:21 <D> Flushing modem (timeout)......

Has anybody faced network-problems with Wine? I'm running RH7 with kernel 2.4.0, have the following network-interfaces: ippp0 for ISDN, my internet connection vmnet1 for one VMWare-"machine" lo0 for whatever ;) I've set up nat & forwarding to get my vmware-client to access to net, as my isp gives only 1 dynamic ip for me. For Wine, I've copied all .DLL -files from my working win98-installation, c:...

Hi Ivo, --On Freitag, 23. Juni 2000 01:15 +0200 Ivo Timmermans <zarq@icicle.yi.org> wrote: > I'm not sure I fully understand your patch. This is not so important since I'm trying to get 1.0pre2 running. Although I had no luck so far, I'll point out what's going wrong at the end of this mail. > For instance, you force a > key exchange when the connection is made,

Hi all, i think my problem is trivial, but i don't get this thing done ... In our office a linux-box ("gw") is connected like this: - via eth0 to the local net (192.168.1.0/24) - via eth1 to the DSL-router (dynamic ip) - via ippp0 (isdn-card) 192.168.2.245 to the stand-alone pc 192.168.2.250 ("single") "single" is a w2k box and have an isdn-card, too and is able to dial in to "gw". Routing is ok, reaching the pc's in 192.168.1.0/24 is working. Now i want to have a vpn between "sing...

...ff:ff:ff:ff:ff:ff inet6 fe80::200:e8ff:fe45:97a9/10 scope link 4: sit0@NONE: <NOARP> mtu 1480 qdisc noop link/sit 0.0.0.0 brd 0.0.0.0 5: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1492 qdisc htb qlen 3 link/ppp inet 217.232.54.6 peer 217.5.98.175/32 scope global ppp0 6: ippp0: <POINTOPOINT,NOARP> mtu 1500 qdisc noop qlen 30 link/ppp 7: sit1@NONE: <POINTOPOINT,NOARP,UP> mtu 1472 qdisc noqueue link/sit 0.0.0.0 peer 206.123.31.114 inet6 fe80::d9e8:3606/10 scope link inet6 fe80::ac10:1/10 scope link inet6 3ffe:b80:2:c97::2/128 scope global T...

hi, I can''t get a freeswan 2.02 ipsec x509 connection at work can somebody help me? ************************************************************************************* global situation ************************************************************************************* the linux gateway (chivas) is a single machine 192.168.1.250 with a local net 192.168.1.0/24, a dyn IP via a DSL

...haracters and the script MATTER. # # # DHCP users: # ----------- # If you get your TCP/IP address via DHCP, **you will need ** to enable the # #ed out command below underneath the PPP section AND replace the word # "eth0" with the name of your EXTERNAL Internet connection (ppp0, ippp0, # etc) on the lines for "ppp-ip" and "extip". You should also note that the # DHCP server can and will change IP addresses on you. To deal with this, # users should configure their DHCP client to re-run the rc.firewall ruleset # everytime the DHCP lease is renewed. #...