search for: innovaphone

Hi, I'm trying to get h323 communication working between asterisk (0.7.1) and Innovaphone Gatekeeper + innovaphone phones. chan_323 installed OK with currently recommended pwlib_1.5.2 and openh323_1.12.2. Registration asterisk with the gatekeeper works OK, externsion for my test(sip) phone gets registered with gatekeeper. when establishing a call between a h323 phone and asterisk I ru...

Hello, when using BLF with Asterisk 1.6, I notice that the Caller-ID information is not displayed on the monitoring key of my Innovaphone IP200A. If the IP-phone of my colleague rings, I should see on my partner key the number of the caller. This is information that is being send in the xml-body of the NOTIFY-message. I do not see this information in the xml-body of a NOTICE-message from the Asterisk PBX. Is it not supported ?...

Hello everybody, I?ve been pulling my hair for a week now over a problem, and I really don?t know where to look anymore. Here?s my setup: There is an Innovaphone IP3000 VoIP gateway on the LAN (10.253.30.254). I can use it to send and receive calls from physical phones attached to it. I have setup Asterisk 1.0.3, with H323 and openH323, and on the same server I also setup GnuGK (10.253.30.1). I use SIP soft phones connected to the Asterisk (SJphone). Both...

...the same problem as Martin Bene mentioned in http://lists.digium.com/pipermail/asterisk-users/2004-January/034521.html Since I found no further information about this I'd like to ask wether you know what the reason for this problem is and how one can get around this. * is registered to the innovaphone gatekeeper. Trunk connection is done with an AVM-B1 and chan_capi. Regards Torsten Krueger Call signalling works fine, but in H323-Trace the following is shown: 2:21:03.498 H245:8135df8 h323neg.cxx(835) H245 Received open channel: R-1, state=Released 2:21:03.509...

Hello everybody, I?ve been trying to solve a problem for several weeks now but it really beats me. There are several hard phones connected to an Innovaphone 3000 VoIP gateway. On the other side I have a SIP softphone connected to Asterisk. The problem I have is that on incoming calls (hardphones to softphone) I only have outgoing audio (from soft to hardphone); everything is OK when I call the other way round. Asterisk (I'm using 1.0.3) uses H323...

...nd fax pass thru well. I have tried to establish modem connection (from computer connected to ATA => SIP => * => E1 => Telco => pstn => another modem) and I do connect (at 14,400) but connection end after a minute. How to establish successfully modem connection? Has anybody tried innovaphone IP21 http://www.innovaphone.com/index.php?id=40&L=0 They say that fax works with their ATA, maybe modem connection will work also... So, how to establish modem connection? -- Tomislav Par?ina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)495148 SIP: tomo@pbx.lama.hr e-mail: tpa...

>Date: Sat, 11 Oct 2003 22:07:49 -0700 >To: asterisk-users@lists.digium.com >From: John Todd <jtodd@loligo.com> >Subject: RE: [Asterisk-Users] SIP / IAX over satellite > >[post re-ordered chronologically] > >>-----Original Message----- >>From: asterisk-users-admin@lists.digium.com >>[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Tilghman

> > Does anyone know of Phone that supports G.723 on H.323. > Innovaphone tiptel 200 for example. http://www.innovaphone.com/webneu2/products/en_IP200.asp One of the nicest phones I've seen so far, h.323 only though. Bye, Martin

We're using a couple of h323 IP Phones (innovaphone ip200) w/ asterisk. Basic call setup works, but we can't get call transfers to work: On pressing the "transfer" button on the phone (getting a new dialtone) the 2nd endpoint is disconnected. Any idea if we can get this to work? Same reaction using the innovaphone ip400 gatekeeper...

I have debugging on in Asterisk and "sip debug". How do I tell what username a SIP client is trying to use to register with Asterisk as? --Eric

Hi, I just got some interesting information from Kirk Telecom (www.kirktelecom.com). This company has been in the business of providing DECT solutions (IP gateway, base stations, repeaters and handsets) either to be used with Cisco CallManager (SCCP protocol) or with the Innovaphone IP PBX system (H.323). Two important elements: 1. It seems they foresee a SIP version of their product in Q1 2005. 2. They are open to perform integration tests with asterisk, provided there is sufficient business potential. In order to convince them about the business potential of an asteris...

...me helping information about H323 Control Protocol, but there is no way to find that information. We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 + 'asterisk-oh323_1.5 channel driver + wrapper' and configured the dialplan for using our H323 Endpoints which are ip200 Innovaphones. Besides, we also use Gnomemeeting but don't care it's not the problem, I think ! The whole endpoints are registered on an ip400 Gatekeeper which routes every call to asterisk, and asterisk processes the Dialplan and sends the call back to the ip400 and to the correct Endpoint. With th...

Dear Guys, One of my customers ask me for a Wireless IP PBX, well the Asterisk fits IP PBX, But what about Wireless, ans also portable, a very special cutomer :) 1.-one possible solution is a PDA with one of those SIp softphones but VERY EXPENSIVE for the PDA 2.- a fxs channel bank and lots of Panasonic like wireless phone but the question is 1.- can my customer use all the features

...e many german users in this ML, that use Asterisk with the > new line of Deutsche Telekom (Magenta Zuhause). I don't think so. Most users will use the router provided by Telekom. Anyway, after 15 seconds of Google'ing for Magenta Zuhause and SIP, maybe this will help you: http://wiki.innovaphone.com/index.php?title=Howto:Deutsche_Telekom_Magenta_Zuhause_SIP_Provider_Compatibility_Test http://hilfe.telekom.de/hsp/cms/content/HSP/de/3378/faq-350884716;jsessionid=0071C998DA2C6AF06C6A4531D3EC952A If you can't test it right now, obviously, then just test it when the switchover has been m...

Hi, we intend to use innovaphone's IP200 full standard compliant H.323 hardware phones (great!) with asterisk. Everything works perfect (calls, signalling, talking) until we want to perform a call transfer (H.450). Upon pressing the R-key the first connection is hung up immediately. As gatekeeper we use a IP400-box OR GnuGK...

Hi all, I have one asterisk server with one ISDN BRI connection to PSTN, with h.323 support (oh323) I buy some voip phones, and I connect them to the same switch as asterisk server is; all is at the same TCP network. I need to route some extensions from my DDI (DID) line at asterisk to some voip phones, and also to do: outgoing calls from any voip phone to PSTN via asterisk, and intermediate

hi, i had asterisk and gnugk running on fedora core 2. it worked quite well. then, i needed to change to red hat 9, and i'm experiencing troubles with h.323 :-( making a call from a h.323 phone (innovaphone) does not work, and dial-in also doesn't. below is an excerpt of what happens, when i try to dial-in my extension (126). it takes about 10(!) seconds, until the 'Called 126' line appears. the phone starts to ring a few seconds later. and when the caller drops, the phone continues to ri...

...me helping information about H323 Control Protocol, but there is no way to find that information. We compiled and installed asterisk_0.9.0 + pwlib 1.5.2 + openh323_1.12.2 + 'asterisk-oh323_1.5 channel driver + wrapper' and configured the dialplan for using our H323 Endpoints which are ip200 Innovaphones. Besides, we also use Gnomemeeting but don't care it's not the problem, I think ! The whole endpoints are registered on an ip400 Gatekeeper which routes every call to asterisk, and asterisk processes the Dialplan and sends the call back to the ip400 and to the correct Endpoint. With th...

Hello anybody, i have a problem on connecting an innovaphone ip202 to theAsterisk-PBX. When i dial in the PBX with the standard (make samples) configuration with the ip202 the connection is fine, but to push any Key on the keypad dosn't take any effect. Is for H323-Phones a special DTMF config necessary? Thanks Hans-Peter Straub -- --------------...

...roblem from operator side. For the consumer this is quite different, because system phones have a whole lot of functions (and function keys etc.) that a 'vanilla' phone isn't able to manage, even as asterisk provides all of that functions. So here the proprietary vendors score a point. Innovaphone for example has the solution that ONE hardphone is guaranteed to work perfectly with their VOIP-PBX since the protocol extensions it uses are supported, * should think about something alike ... 4. TCO. Asterisk with the underlying structure of PC hardware and open source operating system has a big...