search for: inmedi

...yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 busydetect=yes busycount=yes busypattern=500,500 answeronpolarityswitch=yes hanguponpolarityswitch=yes ;PRI RDSI - SPAN 1 group = 1 context = incoming-1 inmediate=no switchtype=euroisdn signalling=pri_cpe channel => 1-15,17-31 ;PRI RDSI - SPAN 2 group = 1 context = incoming-2 inmediate=no switchtype=euroisdn signalling=pri_cpe channel => 32-46,48-62 ............... Thanks in advance, Elder Arohuanca Lagos Phone: +51 1 991696900 Lima - Peru

Hello all, I want to setup Asterisk to forward a call if the dialed extension is busy. I do not want to wait on the line until the extension timeout expired. What I want is when I dial am extension currently Busy (Talking with someone), asterisk inmediately forwards my call to an extension I previosly defined. Someone could help me? Any clue will be appreciated. Regards from Spain. Ismael Gil.

HI all, Is it possible to install a virtual guest (FreeBSD and OpenBSD mainly) from kvm host's console? I have tried to do some search about this but I haven't found anything about it. My idea is to launch "virsh start guest1" and inmediately "virsh console guest1", but it doesn't works until serial console is configured inside guest .... Any tip? Thanks.

...d penny via samba: > > After deciphering the above, Sorry. evolution has reformatted my text :-( > it is a known feature, only when a user > logs in can you be sure to get a full list of the users groups. Very strange. I've recreated a new user and put it in all groups and he was inmediately in all groups. What does mean to log in? Is "smbclient //server/share -U user%pw" enough? Connecting "sta" with smbclient has access to all groups. Making su - sta ; id Not all groups will be shown. > > What is interesting are the ID's in the 4000000 range, why...

We used samba 2.0.6 under Redhat 6.1 with W98/NT4 clients without any problems. Now we upgraded one PC with Windows2000. In the beginning everything worked fine. But suddenly there are problems: Browsing a specific subdirectory of a share on the server cause a inmediate crash of W2k with a automatic restart. I upgraded to Samba2.0.7, again W2k crashes. I connect to this subdirectory from a W98 client and the problem disapears. The crash occurs not with all subdirectories, just with some. I checked all files in this directory but couldn't find anything ra...

...your suggestions! This morning I investigated this problem a bit more in depth. It turned out that a buggy NVidia driver (libnvidia-tls.so) is loaded by defualt provoking the reported problem. After renaming /usrlib/tls/ too /usr/lib/tls_old (can also be entirely removed!) the problem vanished inmediately and R Commander works smoothly out of the box! Just thought this might be of interest in case of someone else is affected by this NVidia related problem! regards Thomas

> We tried that too...but still it returns an empty map. I'm not sure what's going on then. :) I think that Vikram is planning to update CVS soon, you might try that, as there has been significant updates. I'm not sure why getNodeForValue would work for you but getScalarMap doesn't... getNodeForValue USES the scalar map! :) > We also saw that Scalar Type has been

...Apparently all works fine except the DTMF. Seems impossible to catch DTMF when nothing (no song) is being playing so I always have to background a sound to be able to receive DTMF tones. When I press a button (looking for IVR interaction) asterisk catches the correct key but the background song is inmediately muted and the next pulsation is not detected because of the previous problem. Is there a patch or a method to solve this problem? Thanks in advance. Carlos. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attac...

...d edit ;autogenrated on 2010-05-11 ;Dahdi Channels Configurations ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak [trunkgroups] [channels] language=es defaultzone=es usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=yes transfer=yes echocancel=yes echotraining=yes inmediate=no ; DGB - 20100322 busydetect=yes busycount=3 ;Sangoma AFT-A200 [slot:8 bus:1 span:1] <wanpipe1> context=from-internal group=1 echocancel=yes signalling = fxo_ks channel => 1 mailbox=300 at voicemail callerid="Jane Doe" <300> context=from-internal group=1 echocance...

...ders only sometime some message "disappear"! which means we see in OE6 a red line over the message (as it would be deleted), but no one delete it (yes I know you don't belive me, I also don't belive our users, but once I saw it). just click on it to see the message and inmediately become as deleted. while when I look at in the server the file is still there and _not_ deleted. and OE6 show "the message already removed from the server". - what about the ssl (imaps) problem? yours. -- Levente "Si vis pacem para bellum...

...thought I should inform you.. taking > user requests may cause you to violate the RIAA rules regarding that topic, > depending on how you handle it. Be careful. ;) Again, in Spain there is no rule in this sense... I mean, a normal air-FM/AM station can receive a call for a song and play it inmediately. What happens if this spanish station broadcasts its content to internet and a US listener listens to that station? Would it be violation? If a song is even made by a US artist but the promo CD is given to the spanish station by a record company in spain who bought the rights to control the c...

...inging: NOTICE[540685]: File rtp.c, Line 291 (ast_rtp_read): Unknown RTP codec 13 received The PSTN recipient's phone rings. The client does not receive the typical intermittent tone/signal that means "the recipient's phone is ringing". When the recipient answers, the call is inmediantly finished. Maybe a short "Hello" can be listened. Asterisk shows a response back from Cisco: Bad Request - 'Invalid IP Address' In sip.conf, Asterisk is forced to use g711ulaw. I've tried other codecs with no success. What is the real problem?. Is it a RTP problem wi...

...is copied into that folder. So, if I make a call placing a call-file in the outgoing folder, nobody answers and my call-file stays in the outgoing folder waiting for 'RetryTime' seconds (say 120 seconds), if another call-file is placed in the outgoing folder the previous call is retried inmediately before the RetryTime finishes. 2.- Problem with high-volume calls: When I put lots of call-files in then outgoing folder, from time to time asterisk show an error in Master.csv. The error is OutgoingSpoolFailed, and shows no info about the call, just "failed" as the extension. I...

...inging: NOTICE[540685]: File rtp.c, Line 291 (ast_rtp_read): Unknown RTP codec 13 received The PSTN recipient's phone rings. The client does not receive the typical intermittent tone/signal that means "the recipient's phone is ringing". When the recipient answers, the call is inmediantly finished. Maybe a short "Hello" can be listened. Asterisk shows a response back from Cisco: Bad Request - 'Invalid IP Address' In sip.conf, Asterisk is forced to use g711ulaw. I've tried other codecs with no success. What is the real problem?. Is it a RTP problem wi...

...earn a better alternative the main drawback of that would be, i think, to have to relink all dependencies into the fat module everytime one of the modules change, since as far as i know, you cannot remove symbols already linked in a module and relink a new version Another question that is more inmediately relevant to me (since it potentially affects or invalidates my current implementation plan) is about the transitivity of the mappings between symbols of different modules. Let me explain with a minimal example; say module A implements symbols used in module B, so B is built and when the Call...

> Again, in Spain there is no rule in this sense... I mean, a normal > air-FM/AM station can receive a call for a song and play it > inmediately. Yes. In the US as well. But not an INTERNET station. The rules are different if you broadcast over AM/FM than if you broadcast over IP. > What happens if this spanish station broadcasts its content to internet > and a US listener listens to that station? Would it be violation? Tha...

...two way origination of the call. Asterisk 1 <==> Public internet <==> NAT <==> Asterisk 2 note the two way pointing arrows. When you call from the *2 to the *1, the call passes, but if you try to call from the *1 to the *2, it will not connect, unless you call from *1 to *2, and inmediately after hang-up, you call in the other way. I'm pretty sure it's a NAT loosing state too fast, and i can do nothing to fix the NAT. Is there a way to have a keep-alive between the two * boxes? I read about a config in iax.conf called qualify=yes to do that? does the qualify parameter a...

....5.3). any bady now where i can read about this or now what i have to do??? My sip.conf: [10] type=friend context=unr username=10 callerid=10 usecallerid=yes hidecallerid=no canreinvite=yes host=dynamic dtmfmode=info nat=no mailbox=10 callgroup=1 pickupgroup=1 threewaycalling=yes transfer=yes inmediate=no cancallfoward=yes disallow=all allow=gsm allow=ulaw thanks in advance wert --------------------------------- Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web -------------- next part -------------- An HTML attachment was scrubbed... URL: http://list...

I've got an X100P that doesn't seem to be detecting hang-ups. I'm not sure what it's supposed to do, but I wouldn't expect it to continue processing the dial plan. Any pointers? Documentation locations that address hanging up would greatly appreciated! TIA!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 david@safedatausa.com

Is there a way get the register on the LHS of a llvm instruction? (in case there is one) for example, given a "free %reg773", I want to find the matching "%something = malloc %", where %something is not necessarily %reg773. One way I found was to inmediately follow the use-def chain up from the free to the malloc. But instead, I want to put %reg773 in a set (possibly with many other %things), and when I find "%something = malloc" look for %something in the set. One way to do it (as far as I see) is to store the "defs" in the se...