search for: initinfo

...om CVS) mge-utalk driver: [root@srv01 ~]# /home/rog/src/nut/drivers/mge-utalk -i 20 -DDD -u root /dev/ttyS0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.86 (2.1.0) debug level is '3' UPS response to 30% Low Batt Level was ? initups: OnDelay unavailable initups: OffDelay unavailable initinfo: 'Si 1' unavailable, switching to 'Si' command initinfo: Si == >3000 44 0< . CAUTION : This is an older model. It may not support too much polling. Please read man mge-utalk and use pollinterval No model found by that model and version ID Please contact us with UPS model, name...

...tt Stat >NAK< 275.015594 Load Stat > < 275.563172 Bypass Stat >ACK< 276.111158 Syst Stat >NAK< 276.659604 Batt Stat >NAK< 277.199644 Load Stat > < 277.747226 Bypass Stat >ACK< 277.747283 Could not get multiplier table: using raw readings. 278.295270 initinfo: battery.charge == >000.0< 278.842839 initinfo: battery.runtime == >00000< 279.390856 initinfo: battery.voltage == >000.0< 279.947187 initinfo: battery.charge.low == >00< 280.503475 initinfo: battery.voltage.nominal == >000.0< 281.051047 initinfo: ups.temperature...

UPS: http://www.eaton.com/Eaton/ESeriesUPS/DXUPS/index.htm?wtredirect=www.eaton.com/DXUPS I have the same problem on two different computers. The first one is running Ubuntu 12.10 i386 , the second one is running Debian 6.0 x64. Both of them are updated. I tried using different serial cable but the result is the same. The connection to the ups using Windows 7 and Winpower is working fine on

It look to me that overwriting UPSTYPE CP signal or polarity in ups.conf have no effect. Looking at drivers/main.c source show that &upstab[upstype].line_norm is set to custom CP in initinfo() only _AFTER_ the serial signals are actually set by upsdrv_initups().

It look to me that overwriting UPSTYPE CP signal or polarity in ups.conf have no effect. Looking at drivers/main.c source show that &upstab[upstype].line_norm is set to custom CP in initinfo() only _AFTER_ the serial signals are actually set by upsdrv_initups().

...oad.off section. (I saw in git that there has been changes already not to send the "Rxxx" part when shutdown without return has been requested - that's what I found, too, does the proprietary driver.) There is a change in main.c, too, because sending the forceshutdown() before upsdrv_initinfo did not read the additional protocol parameter so the ups was not shut down when upsdrvctl shutdown was called from the halt script in init.d. So I moved the forceshutdown below the initinfo. CU, Gernot -------------- next part -------------- A non-text attachment was scrubbed... Name: yuntoq.diff...

...d_to_all: SETINFO ups.mfr "MGE UPS SYSTEMS" send_to_all: SETINFO driver.version.internal "0.89" mge_command: sending [S] mge_command: sending [i] mge_command: sending [ ] mge_command: sending [1] mge_command: sending [0D] mge_command: sending [0A] mge_command: received 0 byte(s) initinfo: 'Si 1' unavailable, switching to 'Si' command mge_command: sending [S] mge_command: sending [i] mge_command: sending [0D] mge_command: sending [0A] mge_command: received 0 byte(s) send_to_all: SETINFO ups.firmware "unknown" mge_command: sending [A] mge_command: sending [i...

...0xffff bcdDevice: 0x0100 iManufacturer: 0x04 iProduct: 0x7c iSerialNumber: 0x36 bNumConfigurations: 0x01 entering shut_get_descriptor(n 22, 1535) shut_wait_ack(): ACK received entering initinfo() entering shut_identify_ups(0x0004, 0x007c) shut_wait_ack(): ACK received shut_wait_ack(): ACK received ] on /dev/cuad1 [885F50007 entering shut_get_report(id: 0c, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 34, len: 1800) shut_wait_ack(): ACK received entering shut_get...

...ered for pl2303 [ 8.960655] usb 8-2: pl2303 converter now attached to ttyUSB0 [ 8.960675] pl2303: Prolific PL2303 USB to serial adaptor driver When I run: sudo /lib/nut/mge-utalk -DDD -a ups1 I get: Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.89 (2.4.1) debug level is '3' initinfo: 'Si 1' unavailable, switching to 'Si' command Syst Stat >< Batt Stat >< Load Stat >< Bypass Stat >< ... etc Any help would be greatly appreciated. Thanks, Phil

* I committed into CVS the gendb patch that I sent to the mailing list on September 12. Arnaud, I hope you approve of this patch; it is more reliable than the previous method in tracking the correct dependencies. * This, together with some other minor recent changes on the Development branch, is between the "before_PSE_3" and "after_PSE_3" tags. Arnaud: if you

...0xffff bcdDevice: 0x0100 iManufacturer: 0x04 iProduct: 0x7c iSerialNumber: 0x36 bNumConfigurations: 0x01 entering shut_get_descriptor(n 22, 1535) shut_wait_ack(): ACK received entering initinfo() entering shut_identify_ups(0x0004, 0x007c) shut_wait_ack(): ACK received shut_wait_ack(): ACK received ] on /dev/cuad1 [885F50007 entering shut_get_report(id: 0c, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 34, len: 1800) shut_wait_ack(): ACK received entering shut_get...