search for: ide1

...XT3-fs error (device ide0(3,10)): ext3_free_blocks: Freeing blocks in system zones - Block = 128, count = 1] Fri 13/12/02 23:55:46.383 [KMSG:<4> <6>attempt to access beyond end of device] [KMSG:<6>16:05: rw=0, want=137058900, limit=39230698] [KMSG:<2>EXT3-fs error (device ide1(22,5)): ext3_free_branches: Read failure, inode=3567502, block=-1576348012] [KMSG:<6>attempt to access beyond end of device] [KMSG:<6>16:05: rw=0, want=1724901664, limit=39230698] [KMSG:<2>EXT3-fs error (device ide1(22,5)): ext3_free_branches: Read failure, inode=3567502, block=-6...

...-FD (which turns off the autonegotiate stuff) my SMB/ftp transfers bumped up to ~5 MBytes/sec and web stuff got much faster too (and the switch port now says I'm running full duplex). And the eth0 transmit errors went away, however, now dmesg fills up with: VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk c...

...kunde 16:42: rw=0, want=1526984940, limit=12289725 Some of the files reportet an input/output-error while accessing them. after deleting the whole directory (which was very stupid, no chance for debugging at all) i got the following errors: Oct 14 21:50:50 srck@trottelkunde EXT3-fs error (device ide1(22,66)): ext3_free_blocks: Freeing blocks not in datazone - block = 1223964245, count = 1 Oct 14 21:50:50 srck@trottelkunde EXT3-fs error (device ide1(22,66)): ext3_free_blocks: Freeing blocks not in datazone - block = 59368495, count = 1 Oct 14 21:50:50 srck@trottelkunde EXT3-fs error (device ide1...

...n a monthly basis; the quota code always seems to be the cause... here are the lines of the last crashes (can't resolve call trace because the old kernels are gone and i didn't resolve the traces when they occured) --- Dec 9 19:55:30 srck@trottelkunde Kernel panic: EXT3-fs panic (device ide1(22,66)): load_block_bitmap: block_group >= groups_count - block_group = 131071, groups_count = 94 Dec 9 19:55:30 srck@trottelkunde Assertion failure in journal_start() at transaction.c:227: "handle->h_transaction->t_journal == journal" --- Jan 4 11:29:42 srck@trottelkunde Ker...

...e grub.conf. [/QUOTE] Looking at grub.conf, I see the following: #boot=/dev/hda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-128.1.10.el5xen) root (hd0,0) kernel /xen.gz-2.6.18-128.1.10.el5 ro root=/dev/VolGroup00/LogVol01 ide0=noprobe ide1=noprobe initrd /initrd-2.6.18-128.1.10.el5.img title CentOS (2.6.18-128.1.10.el5) root (hd0,0) kernel /vmlinuz-2.6.18-128.1.10.el5 ro root=/dev/VolGroup00/LogVol01 ide0=noprobe ide1=noprobe initrd /initrd-2.6.18-128.1.10.el5.img title CentOS (2.6.18-128.el5)...

...XT-PIC keyboard 2: 0 XT-PIC cascade 5: 2954 XT-PIC eth0 8: 1 XT-PIC rtc 11: 0 XT-PIC usb-uhci 12: 29 XT-PIC PS/2 Mouse 14: 7199 XT-PIC ide0 15: 1 XT-PIC ide1 NMI: 0 ERR: 0 ------------------------------------------------- ------------------------------------------------- [root@qhserver proc]# cat ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 0...

...e grub.conf. [/QUOTE] Looking at grub.conf, I see the following: #boot=/dev/hda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-128.1.10.el5xen) root (hd0,0) kernel /xen.gz-2.6.18-128.1.10.el5 ro root=/dev/VolGroup00/LogVol01 ide0=noprobe ide1=noprobe initrd /initrd-2.6.18-128.1.10.el5.img title CentOS (2.6.18-128.1.10.el5) root (hd0,0) kernel /vmlinuz-2.6.18-128.1.10.el5 ro root=/dev/VolGroup00/LogVol01 ide0=noprobe ide1=noprobe initrd /initrd-2.6.18-128.1.10.el5.img title CentOS (2.6.18-128.el5)...

On a 2.4.17 (MontaVista 2.1) kernel using ext3, I recently starting seeing the error EXT3-fs error (device ide1(22,1)) in start_transaction: Readonly filesystem EXT3-fs error (device ide1(22,1)) in ext3_delete_inode: Readonly filesystem on a file system within 10-20 seconds after remounting it r/o. Apparemtly a write is being deferred past the remount point and then runs into problems when it is performed b...

...en i connect any serial device to that port in linux it does not work. in /proc/ioports there is entry for that port as 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) ---- > displayed here 0cf8-0cff : PCI conf1 c000-cfff : PCI Bus #01 c800-c8ff : Realtek Semiconductor Co., Ltd. RTL-8139 c800-c8ff : 8139too d800-d81f : PCI device 8086...

...IC-edge timer 1: 2 0 0 0 IO-APIC-edge keyboard 2: 0 0 0 0 XT-PIC cascade 8: 4 0 0 0 IO-APIC-edge rtc 15: 11 0 0 0 IO-APIC-edge ide1 16: 0 0 0 0 IO-APIC-level usb-uhci 18: 0 0 0 0 IO-APIC-level usb-uhci 19: 0 0 0 0 IO-APIC-level usb-uhci 28: 21327 0 0 0 IO-APIC-level eth0 29...

Hello all, I've posted on this problem before. Well here goes again. I have an intel mobo with a p4 2.4ghz proc, 1GB Ram. It has built-in ethernet and vga and 6 pci slots. I dreamed of making this my household communications server: internet router, firewall, vpn and asterisk. Everything works except the TDM fxs card. Well it works for a little while and it dies: no dialtone, no

...####################################### Output from dmesg: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). hdc: timeout waiting for DMA ide_dmaproc: chipset supported ide_dma_timeout func only: 14 hdc: status timeout: status=0xd0 { Busy } hdd: DMA disabled hdc: drive not ready for command ide1: reset: success EXT3-fs error (device ide1(22,65)): ext3_readdir: bad entry in directory #2665467: rec_len % 4 != 0 - offset=0, inode=762621470, rec_len=44574, name_len=110 Assertion failure in journal_bmap_Rbbdc8009() at journal.c:602: "ret != 0" ------------[ cut here ]------------ kern...

...timer 1: 530 489 IO-APIC-edge i8042 2: 0 0 XT-PIC cascade 8: 1 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-level acpi 12: 56 0 IO-APIC-edge i8042 15: 489 0 IO-APIC-edge ide1 169: 5107236 5082420 IO-APIC-level libata, uhci_hcd, wctdm 177: 2136633 0 IO-APIC-level eth0, Intel ICH5 185: 1001907 6889735 IO-APIC-level uhci_hcd, wctdm 193: 0 0 IO-APIC-level uhci_hcd 201: 0 0 IO-APIC-level ehci_hcd 217:...

Hi, Every time I dial into my asterisk box i hear nothing but asterisk jittering. The following is an example of what I get on the asterisk CLI Thanks *CLI> DEBUG[81926]: File chan_sip.c, Line 3826 (check_user): Setting NAT on RTP to 0 DEBUG[81926]: File chan_sip.c, Line 4807 (handle_request): Check for res DEBUG[81926]: File chan_sip.c, Line 952 (find_user): Call from user

Posted a similar version of this to the RHEL4 list... I''m having trouble getting CentOS 4.2 installed on a DL140G2 with two SATA drives. I am doing a PXE install, so I do not have a CD-ROM drive in the system and this appears to have the side-effect that both SATA drives are caught by the Uniform Multi-Platform E-IDE driver before ata_piix can catch it. As soon as I hook an IDE CD-ROM

...he drive is the I was able to see only aprox 30GB out of the available 60GB in 'fdisk' for RH7.3. So I started using the partitionted 30GB. The hard drive worked fine for about 2 weeks. Then the following errors occurred: ----------------- Oct 26 04:02:37 lynx kernel: EXT3-fs error (device ide1(22,2)): ext3_get_inode_loc: unable to read inode block - inode=32769 , block=65541 Oct 26 04:02:37 lynx kernel: end_request: I/O error, dev 16:02 (hdc), sector 0 Oct 26 04:02:37 lynx kernel: end_request: I/O error, dev 16:02 (hdc), sector 1048616 Oct 26 04:02:37 lynx kernel: EXT3-fs error (device i...

...C cascade > 5: 32813694 XT-PIC zaphfc > 8: 2 XT-PIC rtc > 10: 16843 XT-PIC b1pci-b000 > 11: 16563 XT-PIC uhci_hcd, uhci_hcd, CMI8738, eth0 > 14: 1822 XT-PIC ide0 > 15: 17 XT-PIC ide1 > NMI: 0 > LOC: 0 > ERR: 0 > MIS: 0 > Sat Nov 20 13:49:40 CET 2004 > CPU0 > 0: 4280248 XT-PIC timer > 1: 44 XT-PIC i8042 > 2: 0 XT-PIC cascade > 5: 32893770...

...art = polarity channel => 1-23 -- proc/interrupts CPU0 0: 6334299 IO-APIC-edge timer 1: 14390 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 3 IO-APIC-edge rtc 14: 2 IO-APIC-edge ide0 15: 505440 IO-APIC-edge ide1 21: 150019 IO-APIC-level eth1 22: 63326503 IO-APIC-level t1xxp -- lspci -bv | grep IRQ Flags: bus master, medium devsel, latency 0, IRQ 11 Flags: bus master, medium devsel, latency 0, IRQ 10 (USB) Flags: bus master, fast devsel, latency 0, IRQ 255 Flags: bus...

...ction: JBD: commit 82 complete, head 8 Oct 7 20:31:36 fargo kernel: (journal.c, 202): kjournald: commit_sequence=82, commit_request=82 Oct 7 20:31:36 fargo kernel: hdd: status timeout: status=0xd0 { Busy } Oct 7 20:31:36 fargo kernel: hdd: no DRQ after issuing WRITE Oct 7 20:31:37 fargo kernel: ide1: reset: success Oct 7 20:31:37 fargo kernel: hdd: status timeout: status=0xff { Busy } Oct 7 20:31:37 fargo kernel: hdd: drive not ready for command Oct 7 20:31:37 fargo kernel: (journal.c, 218): kjournald: kjournald wakes Oct 7 20:31:37 fargo kernel: (journal.c, 224): kjournald: woke because o...

...0 XT-PIC cascade 5: 3914 XT-PIC usb-uhci, usb-uhci, eth0 8: 1 XT-PIC rtc 10: 0 XT-PIC usb-uhci, ehci_hcd, t1xxp 12: 48 XT-PIC PS/2 Mouse 14: 4094 XT-PIC ide0 15: 1 XT-PIC ide1 NMI: 0 ERR: 0 Thanks and Regards Gary