search for: ich2

Hello, I am having a problem with a new server running FreeBSD 4.9-PRERELEASE. Once every two days or so, it reboots itself.. there is no exact time of the day it reboots.. It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today). I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...

Hello! I have an old Dell Latitude C800 laptop (with Pentium3 CPU in it). FreeBSD 6.3-STABLE was running fine on it, but I decided to update the machine to 9.1-STABLE. Well, neither my own custom kernel, nor even the official 9.1-RELEASE CD1 would boot... In both cases the boot process runs up to detecting uhub0, then either hangs forever or shuts off after a short while. Again, I thought I

...: <Host to PCI bridge> on motherboard Sep 5 16:18:10 polo /kernel: pci0: <PCI bus> on pcib0 Sep 5 16:18:10 polo /kernel: agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 Sep 5 16:18:10 polo /kernel: pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0 Sep 5 16:18:10 polo /kernel: pci1: <PCI bus> on pcib1 Sep 5 16:18:10 polo /kernel: pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 11 Sep 5 16:18:10 polo /kernel: pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridg...

...rface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 12 pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0x9000-0x90ff mem 0xd9000000-0xd90000ff irq 11 at device 3.0 on pci2 rl0: Ethernet address: 00:50:ba:60:7b:83 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal m...

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result ------------------------------------------------------ enabled none hang disabled none ok enabled rl...

...at 00:1f.0 PCI: Found IRQ 11 for device 01:0c.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 01:0c.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.16 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller on PCI bus 00 dev f9 ICH2: chipset revision 17 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: MAXTOR 6L020J1, ATA DISK drive hdc: SAMSUNG CD-...

Hi, Every time I dial into my asterisk box i hear nothing but asterisk jittering. The following is an example of what I get on the asterisk CLI Thanks *CLI> DEBUG[81926]: File chan_sip.c, Line 3826 (check_user): Setting NAT on RTP to 0 DEBUG[81926]: File chan_sip.c, Line 4807 (handle_request): Check for res DEBUG[81926]: File chan_sip.c, Line 952 (find_user): Call from user

...st Ethernet> port 0xc400-0xc47f mem 0xe5010000-0xe501007f irq 11 at device 5.0 on pci2 Apr 6 23:02:12 dev /kernel.keep: de0: DEC DE500-AA 21140A [10-100Mb/s] pass 2.0 Apr 6 23:02:12 dev /kernel.keep: de0: address 00:00:f8:02:fc:b2 Apr 6 23:02:12 dev /kernel.keep: isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 Apr 6 23:02:12 dev /kernel.keep: isa0: <ISA bus> on isab0 4.8 Apr 6 23:00:39 dev /kernel: pci2: <PCI bus> on pcib2 Apr 6 23:00:39 dev /kernel: pci2: <SiS 6326 SVGA controller> at 1.0 Apr 6 23:00:39 dev /kernel: pci2: <unknown c...

...XT-PIC keyboard 2: 0 XT-PIC cascade 3: 1853793865 XT-PIC wcfxo 4: 1853787231 XT-PIC wcfxo 8: 2 XT-PIC rtc 9: 0 XT-PIC acpi 10: 0 XT-PIC Intel 82801BA-ICH2 12: 57674469 XT-PIC eth0, PS/2 Mouse 14: 2097777 XT-PIC ide0 15: 10619 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 The wcfxo's are clearly allocated their own INT but can something else mess-up...

...tone zone 0 (United States / North America) Jun 19 08:41:34 b2 kernel: Intel 810 + AC97 Audio, version 1.01, 02:25:38 Dec 24 2004 Jun 19 08:41:34 b2 kernel: PCI: Found IRQ 10 for device 00:1f.5 Jun 19 08:41:34 b2 kernel: PCI: Sharing IRQ 10 with 00:1f.3 Jun 19 08:41:34 b2 kernel: i810: Intel ICH2 found at IO 0xdc40 and 0xd800, MEM 0x0000 and 0x0000, IRQ 10 Jun 19 08:41:34 b2 kernel: i810_audio: Audio Controller supports 6 channels. Jun 19 08:41:34 b2 kernel: i810_audio: Defaulting to base 2 channel mode. Jun 19 08:41:34 b2 kernel: i810_audio: Resetting connection 0 Jun 19 08:41:34 b2...

...bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04) 00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 04) 00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 04) 00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 04) 00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) (rev 04) 00:1f.3 SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 04) 00:1f.4 USB Controller: Intel Corp. 82820 820 (Cam...

...abled Using $PIR table, 7 entries at 0xc00f2300 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel model 2562 VGA-compatible display device> at 2.0 irq 11 pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xe6800000-0xe68000ff irq 10 at device 13.0 on pci2 rl0: Ethernet address: 00:0c:6e:37:39:87 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media...

...: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xd8d00000-0xd8d7ffff,0xd0000000-0xd7ffffff irq 12 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc000-0xc01f mem 0xd8800000-0xd88fffff,0xd8c00000-0xd8c00fff irq 12 at device 0.0 on pci1 fxp0: Ethernet address 00:a0:c9:e7:a6:e6 inphy0: <i82555 10...

...9;Intel Corporation' device = '82801CA/CAM (ICH3-S/ICH3-M) USB Controller #2' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x42 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM (ICH2/3) PCI to I/O Hub Bridge (2448)' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x248c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801CAM LPC Interface or ISA bridge: see Notes' class = brid...

...evice = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB pcib5@pci0:0:30:0: class=0x060401 card=0x30a5103c chip=0x24488086 rev=0xe1 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x30a5103c chip=0x27b98086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801GBM (ICH7-M) LPC Interface Controller'...

...controller USB-C> port 0x2040-0x205f irq 11 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci4: <PCI bus> on pcib4 pci4: <ATI Mach64-GR graphics accelerator> at 1.0 irq 2 isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> p...

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

...Unregistering netfilter hooks type=1404 audit(1369944367.063:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root udev: starting version 147 intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (l...

Dear best guys, I really love 5.3 in many ways but here're some unbelievable transfer rates, after I went out and bought a pair of Intel GigaBit Ethernet Cards to solve my performance problem (*laugh*): (In short, see *** below) Tests were done with two Intel GigaBit Ethernet cards (82547EI, 32bit PCI Desktop adapter MT) connected directly without a switch/hub and "device