search for: hugolivud

Hi, I'm running a 1.1 version of Asterisk (a stable build from back in Oct-05) running on RedHat 9.0. Everything's been great but a couple of days ago, we all stopped receiving emails of our voicemail. There's been no changes to our configuration I bet I'm expereiencing a Linux problem rather than an Asterisk problem, but because I know only as much Linux as required to get

Hi, I'm having trouble compiling zaptel 1.4.4 on SUSE 10.1. I'm really only interested in getting ztdummy to work because this is a dev machine with no zaptel h/w. SUSE 10.1 is a 2.6 kernel: asterisk-dev:/home/hugh # uname -r 2.6.16.13-4-default It seems that my problem is related to autoconf.h - I cannot find that file: asterisk-dev:/home/hugh # find / -name 'autoconf.h'

I have an Asterisk serving 15 people using the X-Lite soft-phone. Currently they all register to the internal IP address of Asterisk (192.168.1.110). I only use VoIP internally. External calls go PSTN. I'd like to arrange it so that they register to our external WAN address (port forwarded to Asterisk) so that they can go mobile and still have Asterisk service. Is it possible to arrange it

On Tue, Sep 16, 2008 at 2:21 AM, Michiel van Baak <michiel at vanbaak.info> wrote: > On 22:46, Mon 15 Sep 08, hugolivude wrote: >> I have two Asterisk servers running on the same LAN. One starts fine, >> but when I start the other I get: >> >> pbx_dundi.c:4582 load_module: Unable to bind to 0.0.0.0 port 4520: >> Address already in use >> >> and Asterisk does not start. &...

I have a bunch of road warriors who I've set up with Xlite clients. Unfortunately the sound quality has been intermittent at best. Sometimes it's great other times completely unusable. When it's bad one usually hears harsh static when the other party speaks or their voice gets "clipped" to static if they speak too loudly. Many of these users have migrated to Skype ? much

Quick question re. NAT traversal. I understand how sitting behind a NAT could cause problems for a SIP UA. The SIP UA would create SIP mesages using IP addresses from inside the network (i.e. 192.#.#.# or 10.#.#.#) and these IP addresses are of course unnavigable for the recipient. What I don't get is why don't web browsers suffer the same problem? A web brower behind a NAT sends an

Curious whether the ChanIsAvail command is thread safe. By that I mean, if I use ChanIsAvail to determine which channel to use, can I be sure that it will still be available when I go to Dial it on the next line? It occurs to me that there's a possibility the channel could get used by a competing thread AFTER my thread has determined it is available and BEFORE my thread gets a chance to

There are a number of them, try Comwave, Voxip or Wiztel. Depends on what you need we may also provide it... email me privately if you're interested. Some provide IAX, some only SIP, H323, & MGCP... -----Original Message----- From: hugolivude [mailto:hugolivude@gmail.com] Sent: Thursday, February 02, 2006 7:39 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Anyone know a good ITSP in Canada that supports *? Hi, I'm looking for a new Internet Telephony Service Provider for my company in C...

Asterisk 1.2.7 RedHat 9.0 Hi, I've run into some voice degradation problems with IAX2: I frequently have calls come in on a DiD provided by an ITSP. I often have to redirect these calls back out to the PSTN (i.e. to a cell phone). When this happens, I don't want my server in the media path, I want to hand it off to my ITSP instead and let them handle both ends of the call. I've

I'm running RedHat 9 with a TDM400 (2FXO, 2FXS). Before I implemented Asterisk, some users were using Bell services to set-up 5 way calling: The user would set up a three way call on one line, switch to the second line, set up another 3 way call and then link the two lines together with the Flash key, thus establishing a 5 way call (the user, 2 others on line 1, another 2 on line 2). How

Hi, I'm having trouble getting feature codes to work in Asterisk 1.4.21.2. Features.conf contians this: blindxfer=## atxfer=*2 automon=*1 disconnect=** I'm really most interested in getting disconnect to work so that I hear "Goodbye" when I press ** during a call connected this way in my dial plan: exten => 1,n,Dial(SIP/14168724765 at 6135551212-sw1|120|gtT) exten =>

Hi, I'm installing * 1.4.9 and a couple questions have come up: 1) I read here<http://www.voip-info.org/wiki/view/Asterisk+installation+for+CentOS+4.x>( http://www.voip-info.org/wiki/view/Asterisk+installation+for+CentOS+4.x) that if you are using E1 cards you need to install LIBPRI. I'm not using any cards on this system, so does that mean I don't need LIBPRI? Asterisk built

I've been asked to assess the cost of implementing Asterisk with a single T1 line in one of our offices. I've had plenty of experience w/ TDM400 cards, but T1 is new for me so a couple of questions: 1) Will I need a digital or analogue interface card? I expect digital is the answer, but the Digium web site said something about analogue cards being able to support "provider T1

Hi - I'm looking into realtime and I'm having a bit of a problem with the SIP part. My review of the posts seems to indicate that I should use realtime static for the [general] part of my sip.conf including the registration commands: register=><did>:<secret>@<domain>/<did context> and use realtime realtime (funny name!) for peers and friends: [myprovider]

Asterisk 1.2.7 RedHat 9.0 I frequently have the need to redirect calls that come in on a DiD provisioned by my ITSP, back to the ITSP so that they can terminate the call on the PSTN. For example when an external call comes in, I often have to send it to a cell phone. I believe that this is referred to as "hairpinning" the call. I do this by answering the incoming call and then I use

Hi, I'm having trouble getting Dial to exit when the caller hangs up in Asterisk 1.4.21.2. I use a POTS line to call into the DiD given to me by VOIP service provider. When the call comes in, I have the VOIP provider send it to another POTS line. All this works fine however when the caller (me) hangs up, the Dial command does not exit. The callee stays connected (and my billing

I'd like to set up a "silent attendant". By this I mean when someone calls me I'd like for them to hear the comfort ringing tones, but for the first 5 seconds I'd like to give them the option of pressing 9 to send the call to an alternate extension; if they don't press 9, the call goes to a default extension. For most callers I just want standard PSTN behaviour, only a

Hi - OK not really an Asterisk question but it is affecting one of my favorite features - emailing voice mail! I've posted on some Linux forums and sendmail.org but no response so I'm hoping someone will take pity on me ;-) My ISP requires SMTP authorization and I'm having a heck of a time getting it to work. I've included the following below: Asterisk 1.4.21 CentOS 5 Sendmail

Just installed Asterisk 1.2 on a brand new clean machine running RedHat 9.0. I have a TDM400 card inside. When I boot, the card seems dead. When I do: modprobe wctdm modprobe Zaptel the lights come on and all seems fine, until I reboot that is... After a reboot I have to repeat the modprobe. I shouldn't have to do a modprobe every re-boot should I? How do you get the drivers to load

Hi, I've seen a few posts about this but no fix. Anyone able to help? Here's what I did: I configured a brand new machine with Redhat 9.0. I made sure that I had: bison cvs gcc kernel-source libtermcap-devel ncurses-devel newt-devel openssl1096b openssl-devel readline41 readline-devel zlib zlib-devel When I went to get Asterisk I did the following: cvs checkout zaptel libpri and