search for: hp9000

I have setup a dedicated print server running on RH 8 with Samba 2.2.5-10 and LPRng-3.8.9-6 to service a HP9000 printer. The print queue for this HP9000 gets it print jobs from a Windows server via a script and the queue is set to HOLDALL status. The HOLDALL status is necessary because the script runs overnight to produce the print jobs which can total anywhere from 500 to 12,000 individual print jobs. My...

Hello again, I sent in this error a couple weeks ago and one person (eric) kindly responded and tried to help, but to no avail. Any one else have any ideas on the following: A couple years ago I installed Samba 2.2.0 on our HP9000 running HPUX 10.20. I am now trying to install it on a customer's HP9000 (also using 10.20) and executing the configure command produces the "No locking available. Running Samba would be unsafe" error message. On our HP9000 I resolved the problem by linking /usr/bin/cc and /opt/ansic...

Hello Samba folks, A couple years ago I installed Samba 2.2.0 on our HP9000 running hpux 10.20. I am now trying to install it on a customer's HP9000 and am getting the error "No locking available. Running Samba would be unsafe" while executing the configure command. I got that error a couple years ago and resolved it by linking /usr/bin/cc and /opt/ansic/bin...

Gostaria de instalar o Centos 6.4 em um dl380e g8 com uma smart array b320i, na instala??o n?o possui drives por isso aparece que n?o h? discos dispon?veis, baixei os drives para red hat .dd do site da HP, como poderia carregar esses drives durante a instala??o? gravei eles em um pen drive. Obrigado. -- Sergio.Alex

I have an hp9000/c160 with hpux10.20+gcc2.7.2. When I try the example in the ace help I get: > library(acepack) > ?ace > TWOPI <- 8*atan(1) > x <- runif(200,0,TWOPI) y <- exp(sin(x)+rnorm(200)/2) a <- avas(x,y) /usr/lib/dld.sl: Unresolved symbol: pow_dd...

Hello List, I am searching the current samba binarys for a HP9000/827S with HP-UX 9.04. Unfortunately we have only the very basic C-compiler installed, that won't do ANSI. Therefore, out attempts to compile gcc from source failed too. Is there anybody able to send me the current Samba binarys, or alternetivly point me to a location for the binarys? Does any...

Hello Samba team, I have installed Samba 2.20 before on our HP9000-D200 running HPUX10.20 without difficulty. However, I had need this week to reinstall the operating system and now when I try to install Samba 2.20 I get the following error message from the configure command: checking configure summary: ERROR: No locking available. Running Samba would be unsafe...

Have anyone tried compiling samba-2.2.2 on HP-UX 11 with winbind. I am interested on authentication from HP9000 (K and L server) to NT4.0 domain. If any one was able to do it, please share your experience, as I will be tackling this task next week. Any help or comments are appreciated. Thanks, Mike

Ladies & Gentlemen, I currently have Samba running on HP9000 / hpux box. Network is Windows NT Workstations are Windows 2000 & Windows NT & Linux I have been able to get samba working from the Linux workstations I have been to get samba working on the NT workstations / 2000 , ONLY but using the smbpasswd file with password encrypt. BIG QUESTION...

On W98 or W2K PC, the first time I open a Word document on a Samba drive it takes about 20secs, thereafter about 2 secs. Running on HP9000 K380 HP-UX 10.20, Samba version must be 6 years old at least.

I have built R-0.50-a4 on HP9000/C160-hpux10.2 with gcc (cc for libs). When I try library(survival4) Error in pos.to.env(pos) : invalid "pos" argument And it does not load. Other libs seem to work. I tested integrate (has f2c translated c), polynomial. Is this a problem with my system only??? TIA osman =-=-=-=-=-=-=-=...

Hello, I ask this question last week but I got no response : I have installed the 1.9.18p8 release on my HP9000 ( HP-UX 10.20 ). I use the same smb.conf than with the p2 release . I have now a problem with the Windows 3.11 clients : In the subdirectories of each share, I can't display the " .. " root directory ( but it works ). Is it a bug or just an error in my smb.conf ?...

...http://en.wikipedia.org/wiki/Electromigration Often there is no symptom of these events before something critical breaks. I'm not siding with anybody here, but there is some glaring mis-information in this thread. -Matt P.s. I do work with a lot of un-pro (claimed) dell equipment, but also hp9000, sun enterprise 10k, old as/400 f40, dec alpha, and yes, pix and netscreen. They all quit at some point! -----Original Message----- From: C F [mailto:shmaltz@gmail.com] Sent: Wednesday, October 11, 2006 11:18 PM To: J. Oquendo; Asterisk Users Mailing List - Non-Commercial Discussion Subject: R...

I'm running Samba 2.0.4b on a E450 running Solaris 7 which acts as a diskspace server for students, normally everything runs quite smoothly with numbers of connections in the region of about 800/900. Then every now and again students will start seeing their connections being lost and others will not get a connection when they log in, looking at the system shows no obvious problems, except

..... https://drive.google.com/file/d/1JrRPdCpYXzyAB0hhVqRyfr2Pj_mtL3dr/view?usp=sharing I just see that there is now final version 2.3.0... time to recompile it on Fedora 29 https://sourceforge.net/projects/cdesktopenv/files/ I couldn't resist... and I cannot forget how beautiful it was on my HP9000 workstation on 1994 ! Gianluca

Ok, got a real interesting bug here (if it is a bug). I have 2 computers running samba, one is an HP, and the other is a Linux machine. The network looks something like this: HP9000 Linux Modem P5-200MMX HP-UX 10.20 <--> Gateway <-- PPP link --> Linux 2.0.29 Stable .16 release .17 release, no patches applied Everything is behind a firewall, so all traffic is "private". There are also a couple of Win95/3.1 boxes hanging around on each n...

I've used SAMBA for quite a long time moving small amounts of data and backing up my PC to an HP9000 and been happy with the performance and reliability. ;-) A friend has a requirement for the movement of large amounts (18GB) of data a day between an HP-UX system and a few NT workstations and we need to know whether we're pushing the technology and/or what kind of load this would put on the H...

...sites. I was executing as super user and all the file permissions are 755 as well as the smb.conf file currently is 777 in the lib directory. This happens on all of the 1.9.17 rev binaries for HP-UX 10.20. If I download and run the 1.9.16 rev binaries from the same site they ran OK. The platform is HP9000/8xx. Than Maung

Hello , I have installed the 1.9.18p8 release on my HP9000 ( HP-UX 10.20 ) . I use the same smb.conf than with the p2 release . I have now a problem with the Windows 3.11 clients : In the subdirectories of each share, I can't display the " .. " root directory . Is it a known bug or just an error in my smb.conf ? Than...

Hello Everyone, I am using an HP9000 with HPUX 9.04D with gcc 2.8.1. When running configure for samba 2.03 I receive the following error: checking statvfs function (SVR4)... no checking for 3-argument statfs function (DEC OSF/1)... no checking for two-argument statfs with statfs.bsize member (AIX, 4.3BSD)... yes checking if large fil...