search for: highdma

...th0) and forcedeth (eth1) [root at fsdsigns2 ~]# more /etc/modprobe.conf alias eth0 e1000 alias eth1 forcedeth sometimes on boot the forcedeth driver thinks it is eth0: [root at fsdsigns2 ~]# dmesg | grep eth forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ADDRCONF(NETDEV_UP): eth1: link is not ready e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth1: link beco...

Log file shows: MAC address issue. Apr 25 08:32:19 fsdsigns kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 209 Apr 25 08:32:19 fsdsigns kernel: forcedeth: using HIGHDMA Apr 25 08:32:19 fsdsigns kernel: 0000:00:07.0: Invalid Mac address detected: 19:ea:64:4d:1a:00 Apr 25 08:32:19 fsdsigns kernel: Please complain to your hardware vendor. Switching to a random MAC. Apr 25 08:32:19 fsdsigns kernel: eth1: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0 Now...

...evision: 3.20 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:08.0 to 64 forcedeth: using HIGHDMA Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 eth0: forcedeth.c: subsystem: 015d9:1511 bound to 0000:00:08.0 ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 58 PCI: Setting latency timer of device...

...tx-tcp-ecn-segmentation: on tx-tcp6-segmentation: off [fixed] udp-fragmentation-offload: off [fixed] generic-segmentation-offload: on generic-receive-offload: on large-receive-offload: off [fixed] rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off [fixed] receive-hashing: on highdma: on [fixed] rx-vlan-filter: off [fixed] vlan-challenged: off [fixed] tx-lockless: off [fixed] netns-local: off [fixed] tx-gso-robust: off [fixed] tx-fcoe-segmentation: off [fixed] tx-gre-segmentation: off [fixed] tx-udp_tnl-segmentation: off [fixed] fcoe-mtu: off [fixed] tx-nocache-copy: on loopbac...

In my Linux VM, I am unable to change scatter-gather / tx-checksumming / TCP-segmentation offload features by ethtool command. I am using virtio nic with vhostuser port backend. It shows me an error: Cannot change tx-checksumming Cannot change scatter-gather Cannot change tcp-segmentation offload Could not change any device features Ony running command ethtool -k ens3, I get the following:

Xen Community: As many of you are aware, the Xen 4.0 hypervisor is due to ship tomorrow (shhhh, don''t tell anyone) and I wanted to get submissions underway for Xen 4.1 features. I have updated the Roadmap Wiki page (http://wiki.xensource.com/xenwiki/XenRoadMap) with a new section for Xen 4.1 features to be added. Feel free to add your ideas or send me your features and I will update the

Xen Community: As many of you are aware, the Xen 4.0 hypervisor is due to ship tomorrow (shhhh, don''t tell anyone) and I wanted to get submissions underway for Xen 4.1 features. I have updated the Roadmap Wiki page (http://wiki.xensource.com/xenwiki/XenRoadMap) with a new section for Xen 4.1 features to be added. Feel free to add your ideas or send me your features and I will update the

Hello, I originally posted this to xen-users, but someone suggested I post it here. I am having ACPI problems on a PenguinComputing Altus1600 system. It has 2x dual core Opteron 2210 processors. The system boots with a standard Debian or Ubuntu SMP kernel, with ACPI enabled. However the xen live cd, binary xen install, as well as my own custom compile of xen 3.0.4 from source will not boot.

...addr [ 9.914918] Floppy drive(s): fd0 is 1.44M [ 9.922547] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 9.931853] FDC 0 is a post-1991 82077 [ 10.396791] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:15:f2:3f:8f:bd [ 10.396839] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 10.591605] udev: renamed network interface eth0 to eth1 [ 10.912575] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 10.912631] HDA Intel 0000:01:00.1: PCI INT B -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 10.912707] HDA Intel 0000:01:00.1: setti...

...rallel port driver [ 17.398770] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 17.399445] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 17.921313] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:13:8f:78:2b:50 [ 17.921324] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 18.605320] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23 [ 18.918047] intel8x0_measure_ac97_clock: measured 50458 usecs (2480 samples) [ 18.918056] intel8x0: clocking to 46877 [ 19.515687] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 22.337071] Adding 2104476...

OK, so after several weeks of trying to get various versions of Xen running of various distributions, I''m starting to wonder if I''ve got a hardware compatibility problem and as the system never really boots with the Xen kernel I''ve got no log files to tell me where the problem is. I was wondering if there''s a way to compile from source with debug turned on,

...: fd0 is 1.44M [ 0.880082] firewire_ohci: Added fw-ohci device 0000:01:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 0.887625] FDC 0 is a post-1991 82077 [ 1.309110] forcedeth 0000:00:07.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:1a:4d:92:56:7b [ 1.309115] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 1.309439] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 1.309465] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.309469] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.309504] ehci_hcd 0000:00:02...

...py0: no floppy controllers found forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. PCI: Setting latency timer of device 0000:00:14.0 to 64 divert: allocating divert_blk for eth0 forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:e0:4d:19:f1:84 forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3 MC: drivers/edac/edac_mc.c version MC $Revision: 1.3 $ MC0: Giving out device to k8_edac Athlon64/Opteron: PCI 0000:00:18.2 (0000:00:18.2) dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.0.2 Found TE4XXP at base address fdcff000, remapped to f88a...

...um vlan jf tso tsoIPv6"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + + if (!disable_lro) { + adapter->lro = true; + printk(" lro"); + } + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter,...

...um vlan jf tso tsoIPv6"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + + if (!disable_lro) { + adapter->lro = true; + printk(" lro"); + } + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter,...

...| + NETIF_F_HW_VLAN_FILTER | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_LRO; + + printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + adapter->lro = true; + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL); + *(u32 *)mac = tmp; + +...

...| + NETIF_F_HW_VLAN_FILTER | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_LRO; + + printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + adapter->lro = true; + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL); + *(u32 *)mac = tmp; + +...

...| + NETIF_F_HW_VLAN_FILTER | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_LRO; + + printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + adapter->lro = true; + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL); + *(u32 *)mac = tmp; + +...

...| + NETIF_F_HW_VLAN_FILTER | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_LRO; + + printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + adapter->lro = true; + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL); + *(u32 *)mac = tmp; + +...

...F_F_TSO | + NETIF_F_TSO6; + + printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6"); + + adapter->rxcsum = true; + adapter->jumbo_frame = true; + + if (!disable_lro) { + adapter->lro = true; + printk(" lro"); + } + + if (dma64) { + netdev->features |= NETIF_F_HIGHDMA; + printk(" highDMA"); + } + + netdev->vlan_features = netdev->features; + printk("\n"); +} + + +static void +vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac) +{ + u32 tmp; + + tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL); + *(u32 *)mac = tmp; + +...