search for: hears

...er. Two SIP Soft XLites are connected to the server. I am able to make calls from one SIP Phones to the other SIP Phones and landlines successfully. The SIP Soft Phone on th eother side can hear my voice but I cannot hear their voice. They can call my local cell phone as well. Samething, they can hears my voice, I cannot hear their voice. The microphone and speakers are working on both sides because we are able to use google talk and are able to talk successfully. But it would not work on XLite over asterisk for some reason. The Asterisk server is a linux server. There is no firewall between th...

Hi list! ConfBridge dtmf_passthrough=no doesn't seem to have any effect. DTMF gets transmitted throughout the conference. I've tried Asterisk 10.7.1 from the official RPMs and 10.8.0 compiled from source. I've confirmed that it's disabled via the CLI "confbridge show profile user <profilename>". It's an all-SIP scenario with RFC2833 as the DTMF protocol.

Hello, We have an asterisk 1.2.13 box that use a Digium TE205P T1 PRI connect to the telco, users mainly use snom 320/300 SIP phones. When dialing to an external phone number with custom ringback music, users reported that they could not hear the music but can only hear the standard ring tone generated by the system. Is there any kind of settings need to allow the ringback music pass to the

Hello, This is not technical post, just looking for suggestions on what to check.I have asterisk for long time, no updates, just maintain OS updates. I use SPA504G phones Very rarely and randomly when we pickup a phone - other side does not hear us. Call them back and all works. Now I have couple people I'm talking to and it seems like very call like this. Someone can't hear someone.

Hi, I'm using Asterisk and a TE110P E1 PRI in Chile. When I call to a disconnected number or any not operational number, the telco sends the Hangupcause disconnection code and an audio message notifying the disconnection cause to the user. Asterisk does not allow the user to hear the audio message form the telco, instead it cuts the call. Any other legacies PRI PBX I've tested allow

Another bizarry: If I run the Echo application from the console, I can hear a very long delay (upward to 1,000 ms). I can run the same application from a GrandStream phone (on the same LAN) and hear little delay. What could possibly be wrong? If it were interrupt overload, I'd hear lots of cracks in my echo, right? I'm not hearing that. Besides, a telephony card is not involved.

When we receive or make a call to the outside - they can hear us, but we cant hear them. It may work 1 of 20 times. I have set canreinvite=no and looked at many sites but cannot track down this problem. Current setup: Isdn Eicon Diva card / Capi -> Asterisk --> network. I have tried adjusting the RTP port in rtp.conf with the Cisco default ports, no luck. Anyone had this

Hello List, I am an Asterisk newbie, and I got a question about Asterisk Background command's option "noanswer": What is required from the user agent, such as a SIP phone, to be able to hear the playback without Answer()? I'm asking this because when I used X-Lite, I could hear the the audio file but when I used a hardware phone (an ATA in fact) I couldn't hear it. The

Me again, another problem. As I said before, I have 2 lines going into "incoming" context. When client calls, I press Flash, client hears music on hold (only on voip line as said in previous post), when I get back and press Flash again to get back to my client I cannon hear him, but he hears me without problems. I have just tested in on the LAN, same situations, happens everytime. -- Executing [113 at firma:1] Dial("SIP/zy...

...d if A calls B and B hits hold, A will hear B's hold music. If however A hits hold, it goes to the default music. If I pull the setmusiconhold from extensions.conf and use musicclass in sip.conf under the peer A, I get the same thing. Peer A has musicclass set and A calls B and B hits hold, A hears their own music that was specified and B hears the default. I can't find any way to call someone, put them on hold and have them hear my music, I can hear what they specify, but I can't specify what they hear (this is all assuming calls are within the same * box). Any ideas how to set tha...

Hi all, when a user dials any number, asterisk automatically generates ringing which caller can hear, and after 2 - 3 rings asterisk detects that the called user is busy, then caller hears busy tone. for example user hears--- tone--tone--tobeep beep beep ---Can i some how eliminate the false ringing at the start so that user hears only beep beep beep if the called user is busy. I have used the R and r options in Dial application but they dont work. -- Rizwan Hisham Software Enginee...

I have Asterisk running with a combination of SIP and H323 clients. I am using the OH323 module instead of the H323 one. When the SIP clients ring each other, they can hear a ringing noise in the ear peice to let them know that the other parties phone is ringing. However, when the H323 client rings a SIP client, there is no ringing sound at all, although as soon as the called party picks up the

...s no notification of when the call was answered. Neither can the parties hear each other. I have tried this on two different machines using two different SIP providers. However, if I change the above NoOp to be Answer(100), i.e. answer the inbound call before placing the outbound Dial, the caller hears progress and when the called party answers, they hear each other fine. Of course, if the called party is busy, the caller just hears in-band busy tone, as the caller's inbound call was already answered. Can anyone explain why I need the Answer? It feels wrong that I should. The siptrunk entr...

I have a weird problem... very puzzling.. Yesterday I had sound problems with the voice prompts, I couldnt hear them, so I rebooted the system and voila, I was able to hear everything.. so I went to bad.. and I just woke up and tried the system again and its back!!! I dial the voicemail system and I cant hear the voice welcome.. I can hear any voice prompts.... Has anybody had this kind of

Hi;? When connecting via VoipBuster or VoipStunt, "I can hear them but they can't hear me"?. This happens with VoipBuster or Voipstunt. Registration is done correctly. I thought it could be something related to NAT, but I don't have this problem when using VoipUser or Asterisk2PSTN, for example. ? I tried with different codecs: gsm, alaw and ulaw but no change. ? So, now?I

Hi all, This is my first post to the list. I have searched the net far and wide but can't find an answer to this problem. When I have call forward working or use the voicemail from a SIP phone, the first part of the message is always cut off. So instead of hearing "call forward cancelled" I hear "l forward cancelled". Or in voicemail I hear "edian mail"

..."The person at extension number XXXX is unavail"? I swear I've read this somewhere before but I'm not typing in the right search. I probably found it before by complete accident. Of course, we want the outside caller to hear a phone number seven digits long, while an extension hears just that, an extension. Chris Coulthurst <mailto:chris@shuksan.com> chris@shuksan.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050512/ccede439/attachment.htm

I've been beating my head for 5 hours to figure out why my asterisk server or sipura isn't passing my voice over to the caller. It seems i can hear the caller but they can't hear me it seems either the asterisk or the sipura isn't passing this information. Here's my setup specs asterisk server 0.7.1 - X100P Card - Sipura 2000 - Nufone Service - Voicepulse

...ween s,5 and s,6, else they will be parked but not hear the please hold message (I want those numbers to go straight to voicemail, I'll clean it up later so I'm not repeating myself all the time). Is there an easy way to do what I want, parking these calls automatically and the caller just hears the normal ringing tone? Thanks!

Hi. Finally I got icecast and darkice to work. I can connect, but now I've got a problem. I can't hear anything. I can hear sound from the computer, but not from Another computer when connecting. I've got an usb mixer. behringer xenyx 302. I'm using alsa. What can this be? /Kristoffer -- Kristoffer Gustafsson Sal?ngsgatan 7a tel:033-12 60 93 mobil: 0730-500934