search for: hdb2

...kiwarka. >>> >>> http://link.interia.pl/f18ae -------------- next part -------------- [2005/08/24 00:49:59, 0] smbd/service.c:make_connection(800) tablet-pc (172.16.0.2) couldn't find service backu [2005/08/24 00:50:00, 0] smbd/service.c:set_current_service(51) chdir (/mnt/hdb2/backup) failed [2005/08/24 00:50:03, 0] smbd/service.c:set_current_service(51) chdir (/mnt/hdb2/backup) failed [2005/08/24 00:50:03, 0] smbd/service.c:set_current_service(51) chdir (/mnt/hdb2/backup) failed [2005/08/24 00:50:03, 0] smbd/service.c:set_current_service(51) chdir (/mnt/hdb2/backu...

Hi I am running a PC under Linux SuSE 7.2 with kernel 2.4.18, self compiled. I changed some days ago the partition of my second HD from ext2 to ext3 with the help of tune2fs -j /dev/hdb2 and everything was running OK. Today, I had a problem with a frozen display and I had to reboot the box cold. During the corresponding forced check I got the following messages: Quote --------- /dev/hdb2: reading journal for ext3 file system... fsck.ext3: Invalid argument:couldn't load ext3 jou...

...MP Sat Feb 19 15:15:24 EST 2005 i686 i686 i386 GNU/Linux # xm list Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 121 0 r---- 140.9 What I''m trying to do is get SuSE 9.2 to come up in it''s own domain.. /dev/hda2 = root for FC-3 /dev/hdb2 = root for SuSE 9.2 My config file in /etc/xen (suse) # cat suse kernel ="/boot/vmlinuz-2.6.10-1.1148_FC4xenU" memory = 64 name = "suse" nics = 1 disk = [''phy:hdb2,hdb2,w''] root = "/dev/hdb2 ro" My problem... When I run ''xm create -c suse...

Hi, hoping that someone on this list can help me here is the Problem. After a crash it seems the journal could not be recovered. This is what mount gives: root@wuehlkiste:# mount -t ext3 /dev/hdb2 /mnt mount: wrong fs type, bad option, bad superblock on /dev/hdb2, or too many mounted file systems and this is the corresponding logfile-entry: Nov 27 11:16:13 wuehlkiste kernel: attempt to access beyond end of device Nov 27 11:16:13 wuehlkiste kernel: 03:42: rw=0, want=66849792, limit=24...

Hi, I connected my harddisk which had ext3 filesystem and some files archived in it as slave device and issued "mkfs /dev/hdb2" accidentally. Immediately I issued Ctrl C and stopped the process. But before that it had deleted some 100 Blocks. After that I am unable to boot that hard disk as primary device. The system is asking me "please insert a valid boot device and press enter" I am even unable to conn...

hi everyone, i installed the ext3 fs on a test machine and tried to use quota on the ext3 filesystem. When i use the command quotaon /dev/hdb2 (the partition with the ext3 fs) i get the message: quotaon: using /home/quota.user on /dev/hdb2: Invalid argument. I created the quota.user and quota.group files and set the permissions to 600. I use quota-2.oopre3-7a, e2fsprogs-1.20-0ext3, kernel 2.2.18 with the ext3-0.0.5e patch. Anyone can hel...

...I try to mount the old HD as /mnt/oldDisk but since it's a LVM, the "mount -t ext3" doesn't work. I'm new to LVM ... could someone help me on this. Also, there is a problem I found. Both HD have the same VG called /dev/VolGroup00 ... server:[root]/dev> pvscan PV /dev/hdb2 VG VolGroup00 lvm2 [76.22 GB / 0 free] PV /dev/hda2 VG VolGroup00 lvm2 [76.22 GB / 0 free] Total: 2 [152.44 GB] / in use: 2 [152.44 GB] / in no VG: 0 [0 ] where the /dev/hdb2 is the old one with bad sector ... and it's unmounted. The /dev/hda2 is the root filesystem of the...

...29310561 c W95 FAT32 (LBA) Disk /dev/hdb: 30.7 GB, 30738677760 bytes 255 heads, 63 sectors/track, 3737 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdb1 * 1 3644 29270398+ 83 Linux /dev/hdb2 3645 3737 747022+ f W95 Ext'd (LBA) Dave

...the standard install ramdisk image, and the FC3 ramdisk image downloaded from xen sourceforge. However, I can''t get it running in a non-zero domain. In brief, I have a full FC3 installed on /dev/hda1, which I typically use as my domain 0 OS. Then I have a minimal FC3 installed on /dev/hdb2. I can boot into the minimal FC3 on /dev/hdb2 as domain 0 under Xen without a problem. I''m trying to ''xm create'' the minimal FC3 from the full FC3 under Xen, but I get a disk error. Here''s the relevant log: ---------------------------------------------------...

...should be able to get to the inodes under this directory and they will hold my data. Can someone provide syntax on how I can do this? FYI, I've tried the following utilities: - e2fsck (with every flag combination imaginable) - e2salvage - Tried to copy the partition to another via dd if=/dev/hdb2 of=/dev/hda2 bs=512 conv=noerror,sync,notrunc - Tried to copy partition with dd_rescue, and the verbose output shows that when it reaches certain positions it gets an "Input/output error" I ran dd_rescue -rfv /dev/hdb2 out then it stopped at position 37879900 so I "continued" fr...

I've tried to create a Linux swap file, but when I run fdisk, it looks like this: Device Boot Start End Blocks Id System /dev/hdb1 * 1 3644 29270398+ 83 Linux /dev/hdb2 3645 3737 747022+ f W95 Ext'd (LBA) /dev/hdb5 3645 3737 746991 82 Linux swap Why is this W95 partition existing in the same place as my Linux swap? I would have thought they'd be incompatible. Can my Linux OS use this Linux swap? Does t...

...e configured 2x 500G sata HDD as Software RAID1 with three partitions md0,md1 and md2 with md2 as 400+ gigs Now it is almost 36 hours the status is cat /proc/mdstat Personalities : [raid1] md0 : active raid1 hdb1[1] hda1[0] 104320 blocks [2/2] [UU] resync=DELAYED md1 : active raid1 hdb2[1] hda2[0] 4096448 blocks [2/2] [UU] resync=DELAYED md2 : active raid1 hdb3[1] hda3[0] 484182912 blocks [2/2] [UU] [==========>..........] resync = 51.8% (251168768/484182912) finish=1975. 7min speed=1964K/sec unused devices: <none> I have reniced the md2-resy...

Ok, this is the case: I've got two raid-5 arrays with software raid, both with three disks. Setup: md0 has hdb2, hdd1 and sda1 md1 has hdb5, hdd3 and sda3 Tonight, the system lost power due to a power spike. The result was a reboot where it attempted to fix the raid, but it didn't exactly work. I have now booted a live CD and using utilities there. It seems the checksum value is slightly off for al...

...o CentOS, so I setup a multiboot on my main machine. There's a Debian Etch install on /dev/hda, and GRUB is also installed on the Debian side. On /dev/hdb, I have CentOS 5. I fdisked the drive manually, then chose manual partitioning during install. The setup for CentOS is: hdb1 -> swap hdb2 -> /boot, ext2 hdb3 -> / , ext3 After completing the install, I rebooted on the Debian side and edited menu.lst like this: <snip> title Debian GNU/Linux, kernel 2.6.18 root (hd0,1) kernel /vmlinuz-2.6.18 root=/dev/hda3 vga=788...

...buffer_head is not uptodate. See following bug description. ------------------------------------------------------- OS: Linux Kernel 2.6.1 Plarform: IA32 Steps: 1. Build the ocfs v2 driver under kernel 2.6. 2. insert ocfs2.ko into kernel 2.6. 3. mkfs.ocfs2 -F -b 4 -l testocfs -m /mnt/ocfs2 /dev/hdb2 4. mount -t ocfs2 /dev/hdb2 /mnt/ocfs2 Results: buffer layer error at fs/buffer.c:1266 Call Trace: [<>] mark_buffer_dirty [<>] journal_create [<>] ocfs_journal_create [<>] ocfs_check_volume [<>] ocfs_mount_volume ...... -----------------------------------------------...

Thank you very much for the help with my problems after I changed ext2 in ext3. So far, everything is now running smootly. However, tune2fs -l /dev/hdb2 delivers among a long output one line Fls features : has_journal needs_recovery What does this mean and how can I perform such a recovery ? Thanks in advance Edgar -- ----------------------------------- Dr.-Ing. Edgar Alwers Mailto:edgaralwers@gmx.de

...onvert an existing IDE one-disk system to RAID1 using the general strategy found here: http://lists.centos.org/pipermail/centos/2005-March/003813.html But I am stuck on one thing - when I went to create the second md device with mdadm, # mdadm --create /dev/md1 --level=1 --raid-devices=2 /dev/hdb2 missing mdadm: error opening /dev/md1: No such file or directory And indeed, ls /dev/md* shows only md0, which worked fine. I do have the 'raid1' kernel module loaded. What am I missing? Do I need to create the nodes manually now? thanks -S

...builtin as a module or the mount statement in the initrd in /linuxrc was not updated from ext2 to ext3. Regards Amit Edgar Alwers wrote: > Thanks for your help through my colleague Beatriz Botero. > > I could boot the box in maintenance modus, edit /etc/fstab and exclude > /dev/hdb2 from booting. After that, I could at least boot up normally my > first hd. > > Now one question and one general remark. > > The question: how could I try to rescue the /dev/hdb2 partition ? I mean, do > I have to formate the disk or what could be a better procedure ? And woul...

...3020140 1675368 1191356 59% / /dev/hda3 50394996 32856 47802184 1% /home none 515096 0 515096 0% /dev/shm /dev/hda4 64191716 32856 60898068 1% /user2 /dev/hdb1 60476036 46272440 11131568 81% /user3 /dev/hdb2 48172868 41662356 4063412 92% /user4

Maybe this question is a little stupid, but please help me. I am a newbie to Xen. When I tried to create a new domain "domain 1", I followed the Yan-Ching CHU''s guide on :installing quick file systems for new domains in Xen 1.2". But when I do "xc_dom_create.py -Dvmid=1", Xen seems to start to boot with some normal bootup information, but right after several