search for: hda7

...here rhas4 is the name of the configuration file for the guest domain (see below). To offset the natural suspicion that I have simply got the path wrong, I submit the following transcript of my ''path verification'' procedure (executed from a running Dom0): reproach:~ # mount /dev/hda7 /mnt/hda7 # Verify that the desired device has been exported to the guest domain: reproach:~ # grep phy /etc/xen/vm/rhas4 # Each disk entry is of the form phy:UNAME,DEV,MODE disk = [ ''phy:hda7,hda7,w'' ] # disk = [ ''phy:vg1/orabase1,/oracle/orabase1,w'' ] # disk =...

...an IDE disk (hda: QUANTUM FIREBALLP AS20, ATA DISK drive / hda: 39851760 sectors (20404 MB) w/1902KiB Cache, CHS=2480/255/63, UDMA(100)) connected to 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) I've decided to make a partition, so I've fired up fdisk and make a new one (hda7) of 4GB, as you can see in this line: /dev/hda7 1170 1679 4096543+ 83 Linux Then I've run mke2fs -j /dev/hda7, mounted it, copied data to it, umount it. I've not rebooted. Now I'm trying to mount it back, after a reboot, and mount refuses to mount it, kernel gives...

Hi folks, For unknown cause I encounter following mounting problem; # /mnt/hda8 mount: wrong fs type, bad option, bad superblock on /dev/hda8, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail via82cxxx: timeout while reading AC97 codec (0x9A0000) via82cxxx: timeout while reading AC97 codec (0x9A0000)

Hi, I've been foolish enough to let Partition-Magic move/resize/etc. my partitions without a prior backup. My ext3 /dev/hda7 (was RH 9) is no longer recognised by fsck. I tried fsck -b 8139, 32768 and 65536 - but am not quite sure about if these are the right ones to try. So far I created another partition with same number of blocks and did a backup with dd if=/dev/hda7 of=/dev/hda8 tried mke2fs -S /dev/hda8 fsck.e...

...edora 6, kernel version is 2.6.18-1.2798.fc. I want to install a Fedora 6 on xen, so I write the following config file, named fc6.cfg kernel = "/boot/vmlinuz-2.6.16.33-xenU" memory = 128 name = "fedora.fc6" dhcp = "dhcp" disk = ['file:/opt/fedora6vm/fedora.fc6.img,hda7,w'] root = "/dev/hda7 ro" when I use the command xm create -c fc6.cfg, I get the following messages: [root@localhost fedora6vm]# xm create -c fc6.cfg Using config file "./fc6.cfg". Started domain fedora.fc6 Linux version 2.6.16.33-xenU (root@localhost.localdomain) (gcc 版本 4...

> [6] ctivating swap partitions: swapon: /dev/hda7: No such device or address > [6] [FAILED] > [6] ioctl 80041272 not supported by xl_block > [6] Finding module dependencies: depmod: Can''t open /lib/modules/2.4.24-xeno/modules.dep for writing > [6] [FAILED] > [6] Checking filesystems > [6] Couldn''t find matching...

...ethernet driver. Loading xenblk Registering block device major 3 Loading reiserfs Waiting for device /dev/hda6 to appear: ..............................not found -- exiting to /bin/sh ------------------------------------ My config file isk = [ ''file:/home/poncho/gentoo/gentoo.2006-0.img,hda7,w'' ] memory = 256 vcpus = 1 builder = ''linux'' name = ''vm1'' vif = [ ''mac=00:16:3e:01:fa:c9'' ] localtime = 0 on_poweroff = ''destroy'' on_reboot = ''restart'' on_crash = ''restart'' extra =...

...uot; <nufarul.alb at go.ro> schrieb am 29.01.02: > I have this problem: > I've partitioned my hard drive with PQMagic 7 in the following way: > hda1 - fat32 > hda2 - ext2 > hda3 - fat16 > hda4 - extended > hda5 - Linux Swap > hda6 - fat32 > hda7 - ext2 > hda8 - fat32 > > I've put syslinux on hda3, but it fails to boot. Did syslinux even start? What did it tell you? Is any of these partitions activated? Which system wrote the MBR? PQMAGIC? Dos? ...? > WHAT CAN I DO FOR MY FIRST HARD DRIVE, BECAUSE PARTITION MANAG...

...BEL hda2 COM32 chain.c32 APPEND hda2 MENU SEPARATOR LABEL hda3 MENU LABEL hda3 COM32 chain.c32 APPEND hda3 MENU SEPARATOR LABEL hda4 MENU LABEL hda4 COM32 chain.c32 APPEND hda4 LABEL hda5 MENU LABEL hda5 COM32 chain.c32 APPEND hda5 LABEL hda6 MENU LABEL hda6 COM32 chain.c32 APPEND hda6 LABEL hda7 MENU LABEL hda7 COM32 chain.c32 APPEND hda7 LABEL hda8 MENU LABEL hda8 COM32 chain.c32 APPEND hda8 LABEL hda9 MENU LABEL hda9 COM32 chain.c32 APPEND hda9 LABEL hda10 MENU LABEL hda10 COM32 chain.c32 APPEND hda10 LABEL hda11 MENU LABEL hda11 COM32 chain.c32 APPEND hda11 LABEL hda12 MENU LABEL h...

.../mnt/cdrom iso9660 noauto,owner,ro 0 0 none /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/hda6 swap swap defaults 0 0 /dev/hda7 swap swap defaults 0 0 Weierstrass:[~] > cat /etc/mtab /dev/hda5 / ext3 rw 0 0 none /proc proc rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 I don't know where is the problem. Regards, JKB

...y (dhcp will be automatically performed) Limitations =========== @@ -69,6 +75,13 @@ - bootsplash is supported, but the ioemu backend does not yet support restart for use by the booted kernel. +- PV-GRUB doesn''t support virtualized partitions. For instance: + +disk = [ ''phy:hda7,hda7,w'' ] + +will be seen by PV-GRUB as (hd0), not (hd0,6), since GRUB will not see any +partition table. + Your own stubdom ================ _______________________________________________ Xen-devel mailing list Xen-deve...

...ournal 1 2 none /proc proc defaults 0 0 none /dev/shm tmpfs defaults 0 0 LABEL=/tmp /tmp ext3 data=journal 1 2 LABEL=/usr /usr ext3 data=journal 1 2 /dev/hda7 swap swap defaults 0 0

...robing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 > hdc: max request size: 1024KiB hdc: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133) hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 hdc14 hdc15 > ACPI: PCI I...

...//MYSERVER/Archives /mnt/Archives -N (MYSERVER is a NT SERVER box and the Linux box from which I smbmount is 2.2.13-7mdk. Everything is fine : [root@lima linux]# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda6 1981000 1373871 504718 73% / /dev/hda7 2873619 1746320 978700 64% /persist vienne:/usr3 2044000 1691220 352780 83% /usr3 vienne:/usr6 2044000 976348 1067652 48% /usr6 /dev/hda1 3068383 1883199 1185183 61% /mnt/nt //MYSERVER/Archives 6835584 53...

...e time of the freeze when I compile with JBD and enable via 1>/proc/sys/fs/jbd-debug. The filesystem seems to be clean, e2fsck passes without errors. Please let me know if (and how) I could help on debugging a such problem. Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda7 5537490 4781331 412049 93% / Filesystem Inodes IUsed IFree IUse% Mounted on /dev/hda7 1441256 255539 1185717 18% / [pid 2232] time(NULL) = 1001184942 [pid 2232] time([1001184942]) = 1001184942 [pid 2232] getpid()...

...xen-3.gz -> xen-3.0.4.1.gz lrwxrwxrwx 1 root root 14 12. Apr 17:09 xen.gz -> xen-3.0.4.1.gz -rw-r--r-- 1 root root 3272609 5. Jan 13:51 xen-syms-3.0.4.1 and i configured menu.lst like QUOTE title Kernel-2.6.18.8-0.1-default root (hd0,6) kernel /boot/vmlinuz-2.6.18.8-0.1-default root=/dev/hda7 vga=0x314 resume=/dev/hda3 splash=silent showopts initrd /boot/initrd-2.6.18.8-0.1-default title Opensuse10.2 with Xen (2.6.16.33-xen_3.0.4.1) root (hd0,6) kernel /boot/xen-3.0.4.1.gz module /boot/vmlinuz-2.6.16.33-xen_3.0.4.1 ro root=/dev/hda7 initrd /boot/initrd-2.6.16.33-xen_3.0.4.1.img from m...

I thought I've found three bugs on syslinux 6.03: (1) With sample config file as is, i.e. leaving commented MENU VSHIFT and MENU COLOR UNSEL but uncommented MENU COLOR SEL: A black "border" is displayed below the selected line and on its right edge. (2) Uncommenting MENU COLOR UNSEL: This effect appears also on separators and on right edge on every unselected lines. (3)

..., assigned bus number 1 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c: 2 ports detected mousedev mice: PS/2 mouse device common for all mice hid usb.c: registered new driver hid Checking all file systems... Parallelizing fsck version 1.21-WIP (01-Jun-2001) /dev/hda7: recovering journal /dev/hda7: clean, 41781/320640 files, 372115/640702 blocks /dev/hda8: recovering journal /dev/hda8: Clearing orphaned inode 96654 (uid=0, gid=0, mode=020600, size=0) /dev/hda8: Already cleared block #0 (65025) found in orphaned inode 96654. /dev/hda8 was not cleanly unmounted, c...

...checked every 20 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. -:/ # shutdown -r now after reboot I get: -:/ # cat /proc/mounts /dev/root / ext2 rw 0 0 proc /proc proc rw 0 0 devpts /dev/pts devpts rw 0 0 /dev/hda9 /opt ext3 rw 0 0 /dev/hda8 /usr ext3 rw 0 0 /dev/hda7 /home ext3 rw 0 0 /dev/hda3 /hda3 msdos rw 0 0 /dev/hda5 /boot ext3 rw 0 0 /dev/hda2 /hda2 msdos rw 0 0 /dev/hda11 /hda11 ext3 rw 0 0 shmfs /dev/shm shm rw 0 0 usbdevfs /proc/bus/usb usbdevfs rw 0 0 -:/ # cat /etc/mtab /dev/hda6 / auto rw 0 0 proc /proc proc rw 0 0 devpts /dev/pts devpts rw,mode=0...

...hing interesting since the upgrade to 2.2.19/0.0.7a - I am experimenting with the am930 wireless driver and i am crashing on module exit. Everytime i reboot afterwards the var fs on /dev/hda8 is inconsistent [...] Checking all file systems... Parallelizing fsck version 1.21-WIP (01-Jun-2001) /dev/hda7: recovering journal /dev/hda7: clean, 39160/320640 files, 354596/640702 blocks /dev/hda8: recovering journal /dev/hda8: Clearing orphaned inode 96655 (uid=0, gid=0, mode=020600, size=0) /dev/hda8: Already cleared block #0 (65025) found in orphaned inode 96655. /dev/hda8 was not cleanly unmounted, c...