search for: hanguped

Hello ! I am experiencing some problems with Asterisk trunking, this is the scenario: There are 3 servers, a DID server provider (VOIP provider) which delegates us a bunch of DID numbers to our asterisk server number one (I will call it AA), from which I route the calls to Asterisk server number 2 (I will call it BB), which then terminate on phone handsets. The trouble is, that I probably

hello friends, is there any way to simplify that extensions.conf file? [miprimerejemplo] exten => 20000,1,Dial(SIP/20000,30,Ttm) exten => 20000,2,Hangup exten => 20000,102,Voicemail(20000) exten => 20000,103,Hangup exten => 20100,1,Dial(SIP/20100,30,Ttm) exten => 20100,2,Hangup exten => 20100,102,Voicemail(20100) exten => 20100,103,Hangup exten =>

Hello asteriskers, I wanted to force a hangup of a SIP to SIP call from the Asterisk CLI> prompt, and found references on using the command "soft hangup <SIP/channel>", but as you can see below, the "soft hangup" command does not seem to exist, and there is no mention about it in the UPGRADE*.txt documents. Can anyone shed light on what would replace "soft

Hello, you know , when a call setup, either caller hangup first or callee hangup first , the hangupcause will set to 16(means Call Clearing Causes) My question is how could i identify whether the caller or callee hangup the phone first? Best Regards! -- Thanks for your supporting, have a nice day. Sucan

hi, I hope someone can help me:-) we’ve got a freepbx server. there are 2 special extensions (2001, 2002). if someone calls this extensions (or a call is forwarded to these extensions) and these extension hangup (not the caller party), then we’d like to put the calls back into a queue (1000) and wouldn’t like to hangup. I read your description about hangup hooks:

Hello everyone... I'm trying to get up a testing pbx installation. Following instructions of what've read from the handbook and from asterisk's wiki, I wrote the dial plan as follows: [general] ; ; static = yes ;[globals] ; [default] ; exten => 0,1,Answer() exten => 0,2,Playback(fcopba1) exten => 0,3,Hangup() exten => *0,1,Answer() exten => *0,2,Record(fcopba1:gsm)

Thanks Doug. Turns out if using hangup request does not work with the escaped character CLI> hangup request PJSIP/1003\ a-00000007 Usage: channel request hangup <channel>|<all> Request that a channel be hung up. The hangup takes effect the next time the driver reads or writes from the channel. If 'all' is specified instead of a channel name, all

Can anyone tell me why I keep getting these messages from IAXTEL? It does appear to register since I get lines like this: 2005-04-30 04:26:42 VERBOSE[1644]: -- Registered to '69.73.19.178', who sees us as 67.182.152.242:4569 But what is this? I don't think IAXTEL is working for me, since I can't dial 800 #s through it when I copy the iaxtel.com instructions. 2005-05-20

Hello, On an Asterisk 1.4.33.1 in a simple scenario: [test] exten => _X.,1,Dial(SIP/12345 at peer01,,,) exten => i,1,Hangup(${HANGUPCAUSE}) exten => t,1,Hangup(${HANGUPCAUSE}) exten => h,1,Hangup(${HANGUPCAUSE}) I have noticed that no matter what value we set in the Hangup(<cause code>) commands, if the call is not answered by peer01 for any reason, the actual cause code

Guys I am having some serious issues with my call queue and Management is breathing down my neck pretty bad, and I am running out of ideas. I have a single queue for my tech support department. I originally was using the AgentCallbackLogin for them and it tested out great on our testing weekends, but it hasn't worked out since. It would only let one of them take calls at a time, no matter

This has been super-helpful, Eric. However, the handleHangupByPeer priorities below are still not run when the peer hangs-up. The last line in the cli when the peer hangs-up is still: Strict RTP learning complete - Locking on source address (Although sometimes there is also: Retransmission timeout reached on transmission) same =>

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

I understand that HangUp() hangs up the calling channel. I want to hangup the called channel. SIP/mycall-xxxxx calls and bridges with DAHDI/1-1. I send SIP/.... to listen to a long, very long, file. GoSub(play-long-file,s,1) [play-long-file] exten=s,1, ;;; Here I want to hangup DAHDI/1-1, the called channel same=n,Playback(very-long-file) same=n,Hangup() How do I hangup the called channel,

I have a customer who named their endpoint to include a space (example, 1003 a) >From the CLI, I want to hangup a channel on this endpoint >From core show channels concise, I see the channel name includes the space PJSIP/1003 a-00000002 I realize the space is interpreted as an argument separator, so my first attempt below doesn't work. I have tried the following and all fail. hangup

Hey everybody, I've been playing around with Asterisk (Current CVS Stable dated: Asterisk CVS-v1-0-11/23/04). I've purchased 2 GS BT102 SIP phones. Both have been upgraded to firmware 1.0.5.18. I've also have installed on my desktop and laptop, X-Lite. I've been using these to learn how to setup Asterisk. I've got a Wildcat X100P on order and will be here next week. My

Good day all I want to tell asterisk that it should hangup a channel in a certain step For example: exten => s,5,Dial(SIP/302,25) exten => s,6,Hangup exten => s,7,Hangup(SIP/302) What happens is that if someone calls into the pbx and hangs up before it gets answered it still keeps on ringing on the internal side and if you pick up there is nothing Please Help

I am using the new 1.8.5 and I just found out that Asterisk won't record the call if the call just hangup. I did a test like this: exten => 1009, 1, Hangup() Then I called 1009: == Using UDPTL CoS mark 5 == Using SIP RTP CoS mark 5 -- Executing [1009 at init-1005:1] Hangup("SIP/1007-0000003c", "") in new stack == Spawn extension (init-1005, 1009, 1)

Hi list, n00b question, but I can't figure it out: [callthrough] exten => _+X.,1,NoOp(nothing here) #include "blockedall.conf" exten => _+X.,n(hangup),Hangup exten => _+X.,n(nohangup),GotoIf($["${CALLERID(num)}" = "anonymous"]?nocli:cli) ... more stuff that is handling the call ... I'm putting CLIs that I don't want to be able to call my

2013/3/26 Richard Mudgett <rmudgett at digium.com> > > On 03/25/2013 05:17 PM, Olivier wrote: > > > Hello, > > > > > > I'm giving hangup-handlers a try on a new Asterisk 11.2.1 setup. > > > My plan is to use this handler to update my CDRs with values such > > > as > > > Asterish and Tech cause (see function HANGUP_CAUSE). >

I was really looking forward to Asterisk 1.0 et al, but it is a major disappointment. I have never experienced any Asterisk release that was interacting with Digium hardware so unreliably. Asterisk hangs up on every outgoing PSTN call (via Zaptel) as soon as the call is being picked up at the other end. I have tried various X100P (original Digium) cards, various phone lines and just about every