David P
2018-Jun-05 19:37 UTC
[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?
Thanks, Eric. I just tried a hangup handler, but it's showing a similar problem: When the peer hangs-up, the hangup handler is not invoked and the caller channel remains open. same => n(callPeer),Set(GLOBAL(Peer${IndexIntoPeers}CurrentCallsCount)=$[${PeerCurrentCallsCount} + 1]) same => n,Set(CHANNEL(hangup_handler_push)=handleHangupByCallerOrPeer,doesntMatter,1(args)) same => n,Set(DialForPeer=SIP/${EXTEN:0:4}@${PeerBeingConsidered}) same => n,Dial(${DialForPeer}) same => n,Hangup() [handleHangupByCallerOrPeer] exten => _.,1,NoOp(${PeerBeingConsidered}: Entered handleHangupByCallerOrPeer Calls ${Peer${IndexIntoPeers}CurrentCallsCount}) same => n,Set(GLOBAL(Peer${IndexIntoPeers}CurrentCallsCount)=$[${Peer${IndexIntoPeers}CurrentCallsCount} - 1]) same => n,Set(GLOBAL(${PeerBeingConsidered}EpochAtCallEnd)=${EPOCH}) same => n,Return() I've also tried replacing the Dial above with: same => n,Dial(${DialForPeer},,g) Cheers, David On Tue, Jun 5, 2018 at 7:38 AM, Eric Wieling <ewieling at nyigc.com> wrote:> Use hangup handlers, they work around the issues with the 'h' extension. > > On 06/05/2018 05:33 AM, David P wrote: > >> Thanks, Anthony. >> >> I added both 'g' and 'F' options. Now, when the caller hangs-up, my >> cleanup code is run by both the caller channel and the peer channel, but I >> only want the caller channel to do that. >> >> Also, when the peer hangs-up, there is no execution of the priorities >> following the Dial. >> >> Finally, is there a way to reset all globals, maybe as a variant of >> "dialplan reload"? >> >> On Tue, Jun 5, 2018 at 1:21 AM, Antony Stone < >> Antony.Stone at asterisk.open.source.it <mailto:Antony.Stone at asterisk. >> open.source.it>> wrote: >> >> On Tuesday 05 June 2018 at 08:33:26, David P wrote: >> >> > We're using Asterisk 14.7.6 and I have a dialplan that ends like >> this: >> > > same => n,Dial(SIP/${EXTEN:0:4}@peer1) >> > same => n,Set(GLOBAL(EpochAtCallEnd)=${EPOCH}) >> > same => n,Hangup() >> > > When peer1 hangsup, the priorities after the Dial are >> executed fine. But >> > when the caller hangsup during the Dial, the cleanup steps aren't >> done. >> > Why? >> > > I did read "Note that on a successful connection, in the >> absence of the g >> > and G modifiers (below), the Dial command does not return to allow >> > execution of further commands for that extension in that context." >> at >> > https://www.voip-info.org/asterisk-cmd-dial/ >> <https://www.voip-info.org/asterisk-cmd-dial/> But it seems not to >> apply >> > because I'm seeing the 'g' behavior without specifying that option, >> and the >> > 'G' option seems intended for a far more complicated scenario. >> >> If you're getting "g" functionality without specifying it, >> congratulations. >> >> If you want something similar when the callER hangs up, you want to >> use the F >> option. >> >> Regards, >> >> >> Antony. >> >> >> >> > -- > http://help.nyigc.net/ >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20180605/8e12b099/attachment.html>
Eric Wieling
2018-Jun-05 19:58 UTC
[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?
Don't use the _. pattern. Ever. The call has two channels so it needs two hangup handlers, something like this, though I've not tested it. [some_context] exten => _X.,1,Noop same => n,Set(CHANNEL(hangup_handler_push)=my_caller_hangup_handler) same => n,Dial(SIP/number at peer,b(pre_dial^s^1)) same => n,Hangup [pre_dial] exten => s,1,Set(CHANNEL(hangup_handler_push)=my_called_hangup_handler) same => Return See: https://wiki.asterisk.org/wiki/display/AST/Pre-Dial+Handlers and https://wiki.asterisk.org/wiki/display/AST/Hangup+Handlers On 06/05/2018 03:37 PM, David P wrote:> Thanks, Eric. I just tried a hangup handler, but it's showing a similar > problem: When the peer hangs-up, the hangup handler is not invoked and > the caller channel remains open. > > same => > n(callPeer),Set(GLOBAL(Peer${IndexIntoPeers}CurrentCallsCount)=$[${PeerCurrentCallsCount} > + 1]) > same => > n,Set(CHANNEL(hangup_handler_push)=handleHangupByCallerOrPeer,doesntMatter,1(args)) > same => n,Set(DialForPeer=SIP/${EXTEN:0:4}@${PeerBeingConsidered}) > same => n,Dial(${DialForPeer}) > same => n,Hangup() > [handleHangupByCallerOrPeer] > exten => _.,1,NoOp(${PeerBeingConsidered}: Entered > handleHangupByCallerOrPeer Calls ${Peer${IndexIntoPeers}CurrentCallsCount}) > same => > n,Set(GLOBAL(Peer${IndexIntoPeers}CurrentCallsCount)=$[${Peer${IndexIntoPeers}CurrentCallsCount} > - 1]) > same => n,Set(GLOBAL(${PeerBeingConsidered}EpochAtCallEnd)=${EPOCH}) > same => n,Return() > > I've also tried replacing the Dial above with: > > same => n,Dial(${DialForPeer},,g) > > Cheers, > David > > On Tue, Jun 5, 2018 at 7:38 AM, Eric Wieling <ewieling at nyigc.com > <mailto:ewieling at nyigc.com>> wrote: > > Use hangup handlers, they work around the issues with the 'h' extension. > > On 06/05/2018 05:33 AM, David P wrote: > > Thanks, Anthony. > > I added both 'g' and 'F' options. Now, when the caller hangs-up, > my cleanup code is run by both the caller channel and the peer > channel, but I only want the caller channel to do that. > > Also, when the peer hangs-up, there is no execution of the > priorities following the Dial. > > Finally, is there a way to reset all globals, maybe as a variant > of "dialplan reload"? > > On Tue, Jun 5, 2018 at 1:21 AM, Antony Stone > <Antony.Stone at asterisk.open.source.it > <mailto:Antony.Stone at asterisk.open.source.it> > <mailto:Antony.Stone at asterisk.open.source.it > <mailto:Antony.Stone at asterisk.open.source.it>>> wrote: > > On Tuesday 05 June 2018 at 08:33:26, David P wrote: > > > We're using Asterisk 14.7.6 and I have a dialplan that > ends like this: > > > same => n,Dial(SIP/${EXTEN:0:4}@peer1) > > same => n,Set(GLOBAL(EpochAtCallEnd)=${EPOCH}) > > same => n,Hangup() > > > When peer1 hangsup, the priorities after the Dial > are executed fine. But > > when the caller hangsup during the Dial, the cleanup > steps aren't done. > > Why? > > > I did read "Note that on a successful connection, > in the absence of the g > > and G modifiers (below), the Dial command does not return > to allow > > execution of further commands for that extension in that > context." at > > https://www.voip-info.org/asterisk-cmd-dial/ > <https://www.voip-info.org/asterisk-cmd-dial/> > <https://www.voip-info.org/asterisk-cmd-dial/ > <https://www.voip-info.org/asterisk-cmd-dial/>> But it seems not > to apply > > because I'm seeing the 'g' behavior without specifying > that option, and the > > 'G' option seems intended for a far more complicated > scenario. > > If you're getting "g" functionality without specifying it, > congratulations. > > If you want something similar when the callER hangs up, you > want to > use the F > option. > > Regards, > > > Antony. > > > > > -- > http://help.nyigc.net/ > > > >-- http://help.nyigc.net/
David P
2018-Jun-05 22:17 UTC
[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?
This has been super-helpful, Eric. However, the handleHangupByPeer priorities below are still not run when the peer hangs-up. The last line in the cli when the peer hangs-up is still: Strict RTP learning complete - Locking on source address (Although sometimes there is also: Retransmission timeout reached on transmission) same => n(callPeer),Set(GLOBAL(CB${IndexIntoPeers}CurrentCallsCount)=$[${PeerCurrentCallsCount} + 1]) ; Ensure that hangup by caller/inbound-channel will invoke handleHangupByCaller. same => n,Set(CHANNEL(hangup_handler_push)=handleHangupByCaller,s,1(args)) same => n,Set(AddressToReachPeer=SIP/${EXTEN:0:4}@${PeerBeingConsidered}) ; Ensure that the channel of the peer (i.e. outbound-channel) is configured with hangup handler. same => n,Dial(${AddressToReachPeer},,b(beforeDialingPeerConfigureItsChannelForPeerHangupHandling^s^1)) same => n,Hangup [beforeDialingPeerConfigureItsChannelForPeerHangupHandling] exten => s,1,Set(CHANNEL(hangup_handler_push)=handleHangupByPeer,s,1(args)) same => n,Return [handleHangupByPeer] ; Ensure that GLOBAL(CB${IndexIntoPeers}CurrentCallsCount) is decremented after hangup, and end-of-call-epoch is set. exten => s,1,NoOp(${PeerBeingConsidered} peer channel: Entered handleHangupByCallerOrPeer Calls ${CB${IndexIntoPeers}CurrentCallsCount}) same => n,Set(GLOBAL(CB${IndexIntoPeers}CurrentCallsCount)=$[${CB${IndexIntoPeers}CurrentCallsCount} - 1]) same => n,Set(GLOBAL(${PeerBeingConsidered}EpochAtCallEnd)=${EPOCH}) same => n,Return [handleHangupByCaller] ; Ensure that GLOBAL(CB${IndexIntoPeers}CurrentCallsCount) is decremented after hangup, and end-of-call-epoch is set. exten => s,1,NoOp(${PeerBeingConsidered} caller channel: Entered handleHangupByCallerOrPeer Calls ${CB${IndexIntoPeers}CurrentCallsCount}) same => n,Set(GLOBAL(CB${IndexIntoPeers}CurrentCallsCount)=$[${CB${IndexIntoPeers}CurrentCallsCount} - 1]) same => n,Set(GLOBAL(${PeerBeingConsidered}EpochAtCallEnd)=${EPOCH}) same => n,Return When the caller hangs-up, handleHangupByCaller is run first, then handleHangupByPeer runs. (And strangely, the value of global CB${IndexIntoPeers}CurrentCallsCount isn't accessible in handleHangupByPeer.) Cheers, David On Tue, Jun 5, 2018 at 12:58 PM, Eric Wieling <ewieling at nyigc.com> wrote:> Don't use the _. pattern. Ever. > > The call has two channels so it needs two hangup handlers, something like > this, though I've not tested it. > > [some_context] > exten => _X.,1,Noop > same => n,Set(CHANNEL(hangup_handler_push)=my_caller_hangup_handler) > same => n,Dial(SIP/number at peer,b(pre_dial^s^1)) > same => n,Hangup > > [pre_dial] > exten => s,1,Set(CHANNEL(hangup_handler_push)=my_called_hangup_handler) > same => Return > > See: https://wiki.asterisk.org/wiki/display/AST/Pre-Dial+Handlers > and https://wiki.asterisk.org/wiki/display/AST/Hangup+Handlers > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20180605/36a17430/attachment.html>
Seemingly Similar Threads
- How to execute priorities following a caller hangup in a successful Dial?
- How to execute priorities following a caller hangup in a successful Dial?
- Handling a non-responsive peer after it answers
- Handling a non-responsive peer after it answers
- Looking for sample hangup_handler_pop and _wipe using vars