search for: h18000

My NC4010 has the ATI Radeon IGP 350M controller http://h18000.www1.hp.com/products/quickspecs/11832_na/11832_na.HTML It works fine in 800x600 but when I change it to 1024x768 the LCD goes bad. Hard to discribe, it looks like the 800x600 is just smaller in the upper left with parts clipped and the rest of the screen repeats part of the reduced sized image...

HP doesn't support Fedora on Proliant hw so you can't just install their ILO and get access to hw info like cpu/mb/temperature,powersupply status,fan info aso. I used the link below to get that access, which enabled me to write a small script that sends snmp-traps to hp-ovo. I did spend quite some time myself until I found this link.

I have a server hp proliant dl160g6 and i'm installing debian 5 but the network interface dosn't have support, anyone could help me, my netword card is broadcom netxtreme gigabit Intel 82576. -- ~~---~---~ Saludos, Eduardo Cruz Ramirez Departamento de Investigaci?n y Desarrollo Grupo Phoenix ? Desarrollo, Soporte y Asesor?a ~ Vis?tanos en: http://www.grupo-phoenix.com

Hi there. I need some advise on how to configure NUT, if it is possible to do it. My UPS, a Compaq R3000 has three individual power segments. I want NUT to: When mains is interrupted. Shut down all serves immediately. When all servers are completely down, in sequence with time delay shut down two of the power segments. When batteries is about to be depleted shut down itself and the last power

...running on a HP-Compaq DL380 G4 Server! Here's the step-by-step description: 1. download the latest BIOS (in my case it was 4.04 from date: 06/02/2005) for the HP-Compaq DL380 G4 using the "Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL480 G4 (P51) Servers" Link: http://h18000.www1.hp.com/support/files/server/us/locate/69_5561.html#2 2. extract the ROMPaq to a diskette and upgrade your server by the instructions appearing during the BOOT from Diskette 3. after you have switched on the server again, press F9 to enter the "ROM-Based Setup Utility" when prompted...

I need to replace a slow HP MSA20 that's a bottleneck right now (We are an HP shop). HP's only option with 3.5" SATA drives is stuck at SATA I behind a SAS controller. Dell makes an MD1000 that claims SATA II speeds behind a SAS Perc 5/E (Don't know anything about dell). Anyone got any real world info they can share? I need 3.5" SATA II at least 12 drives behind SAS, I am

Thanks Nazo, for that amazing long answer. The problem is, though, that you're talking to an _XP user_, so I can't: "Just use dd with if=/dev/sda" because that's Dutch to me. I even had trouble understanding what a "distro" was, till I looked it up. And I can't run "mkdiskimage", because it doesn't run under XP. Also, according to

I need to build up a few servers and routers, and am wondering how FreeBSD 9.1 is shaping up. Will it be likely to be more stable and robust than 9.0-RELEASE? Are there issues that will have to wait until 9.2-RELEASE to be fixed? Opinions welcome. --Brett Glass