search for: gwprefixes

After much reading and fiddling - I have the gnugk GateKeeper running and can make calls from the H323 phone to the sip phone. Voice works bi-directionally.. Calling from SIP to H323 gives me a problem... Both gnuGK and Asterisk are on the same box. Someone said this was OK. Others said No. I added a second IP (eth0:1) and told gnuGK that was HOME. How do I lock asterisk to the other (eth0) IP -

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

What is the configuration of H323.conf and openphone in order to run openphone and asterisk together ?

Hi, I'm trying to get H323 support using asterisk 0.4.0 Unfortunately the pwlib and openh323 versions mentioned in the asterisk-oh323 readme file are no more available, and I had to use newer ones. Now I installed all libraries, but got a segemntion fault when starting asterisk while reading the chan_oh323.conf file. When I declare more than 9 gwprefix I get first a error "out of

For the benefit of everyone, having H323 Configuration problem due to H245 Tunnel, check the h323 Config embeded at the end. Comment the offending line as under: ; ; Enable H.245 tunnelling (yes,no). ; h245Tunnelling=yes ; -----Original Message----- From: Tola Ogunsan [mailto:tolaniye@hotmail.com] Sent: Wednesday, May 25, 2005 1:03 PM To: Kanuri, Seshu (Company IT) Subject: RE: oh323 problems

Folks! I would appreciate if someone could send me a simple working h323 configuration file oh323.conf that is part of asterisk@home installation. I have tried to use the oh323.conf content listed on WIKI but it is just not working as my H323 endpoint ( PA168 based ATCOM Phone) cannot register. I need a working example of this file for similar phone. Seshu

Hi all, i have big problems to make a h323 call over the gatekeeper from my provider. The provider demanded following account data: H323 ID: XXX-XXX-XX-X DetinationNumer: XXXXXXXXXXX I have configured the oh323.conf following: gatekeeper=XX.XX.XXX.XXX alias=XXX-XXX-XX-X Isx the alias equal to the h323id ? And how i have to make a call with the dial app ? I have following config: exten

I have InAccess Networks' oh323 installed and partially working. I can call the h.323 phone from asterisk using Dial(oh323/${IP_ADDRESS}). How do I dial from the phone to an asterisk extension? It does not appear to me that the phone actually registers (or attempts to register) with asterisk. I'm using Asterisk Stable and the phone in question is a polycom Soundstation IP 3000 or

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

...O8601 EndpointSignalPort=1720 EncryptAllPasswords=0 UseMulticastListener=0 StatusPort=7000 SignalCallId=1 [GkStatus::Auth] rule=password | explicit 81.29.xxx.xxx=allow Shutdown=allow gkadmin=eZqojUYXNUc= [RasSrv::PermanentEndpoints] 195.34.xxx.xxx:1720=gw1;00 81.29.xxx.xxx:1730=astgw;02 [RasSrv::GWPrefixes] gw1=00 astgw=02 [RasSrv::RRQFeatures] AcceptEndpointIdentifier=1 AcceptGatewayPrefixes=1 OverwriteEPOnSameAddress=1 IRQPollCount=0 [RasSrv::ARQFeatures] CallUnregisteredEndpoints=0 ArjReasonRouteCallToGatekeeper=0 [RoutedMode] GKRouted=1 H245Routed=1 CallSignalPort=1720 AcceptNeighborCalls=1 Ac...

...ext=Office [7004] type=h323 context=Office ;[7005] ;type=h323 ;context=Office [gw1] type=h323 context=Office ----snip---- And here is my gatekeeper.ini file: [Gatekeeper::Main] Fourtytwo=42 Home=10.1.1.51 NetworkInterfaces=10.1.1.51/24 UseBroadcastListener=0 [GkStatus::Auth] rule=allow [RasSrv::GWPrefixes] gw1=2840 Does the above look correct. If I use Asterisk standalone and then connect ohPhone directly to Asterisk i can easily place outgoing calls, so the setup for outbound calls works I think. -- Mickey Binder

Hello I am a newbie to Asterisk. We have set up Asterisk on a PC with Redhat 9.0. We have installed H323 openphone on our PC's. We are wondering what a gatekeeper does. It seems we need one but what I have seen in this group is that a gatekeeper must be installed on another box on the network. As all our PC's on the network use Microsoft OS is there a free gatekeeper software for

Hi, try to setup asterisk as an ISDN2H323-Gateway. The only problem i have after establishing a call is, that Audio works only from IP to ISDN-Phone but not from ISDN to IP-Phone. A known problem ??? Thanks in advance Michael i am using asterisk-cvs, pwlib V1.6.6 (janus), openh323 V1.13.5 (janus) and oh323-0.6.0 Here are my config's ############## # modem.conf # ##############

Hello, i want to use asterisk as a gateway for H323-Phones. But i cant get it work. I'm using a gatekeeper on another computer. My IP-phone is registered there. Does anybody can sent me an oh323.conf and extension.conf as examples? Thanks in advance Erik Bastian -- NEU : GMX Internet.FreeDSL Ab sofort DSL-Tarif ohne Grundgebühr: http://www.gmx.net/dsl

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &