search for: ghosting

Hello all We have two very important workstations dedicated to tasks of development and investigation. At the moment we have installed a dual boot platform with CentOS 4.0 and Windows XP Proffessional SP2. In order to do backups of these machines we need to create an image with Norton Ghost 2003. We have worked with Ghost during several years with different platforms (Red Hat, White Box Linux,

I am trying to use symantic 8.X and ghost a disk. I get "Apllication Error 29004. Read sector failure, result = 1, drive = 0, sectors 2071692247 to 2071692255" when trying to ghost the disk. anyone done this successfully? symantic supports ext3. Thanks, jerry

Hi all, I love syslinux!! It works great. Problem. GHost 8.x and higher... With ghost 7.5 and earlier I was able to boot floppy images from my tftp server. But as you all know Ghost 8.x and higher had a bloated ghost.exe that does not fit on a single 1.44mb floopy image file. Has any one had any luck in getting ghost 8.x and higher to work with syslinux and memdisk? I have tried to create over

Hello, I would like to clone a Windows XP workstation that's part of a Samba domain using Norton Ghost. In Ghost you need to create an account in the domain to be able to add your domain to the list of supported domains by the Norton Ghost console. When I try to add such an account, I get this error message: Unable to add DOMAIN to the list of supported domains, The procedure number is

Hello, i've got a problem with boot pxe on pc, all my pc works fine except in a room where all the same pc doesnt works : my configuration (dhcp tftp etc...) works fine also here is a part of my tftpboot directory ghost/ memdisk menu.c32 pxelinux.0 pxelinux.cfg/ ./ghost: ghost288.IMA ghost_geii_101.IMA ghost_MM.IMA ghost_MM.IMA.old ./pxelinux.cfg: default here is a part of my default

Hardware with issue is a Lenovo T410 (circa 2007?): SysLinux PXE boot (pxelinux.0) version 2009 - PXE boot works, select Ghost from PXE menu, PC-DOS loads, Ghost.exe runs and networking is working for Ghostcast/peer to peer. SysLinux PXE boot (pxelinux.0) version 2014 - PXE boot works, select Ghost from PXE menu, PC-DOS loads, Ghost.exe runs and networking is NOT working for Ghostcast/peer to

When i try to swap files between disks on my server using samba i get errors: then windows reports "The specified network name is no longer available". Sometimes the copies are fine other times files just wont copy. Hardware checks out fine. Ive even replaced the network cable between server and switch thinking that might be causing the problem. Ive included a ethereal cap of the

Hello, I saw this posting by Christopher Robert Woods. I am having the identical problem with Samba on Suse Linux 7.2 (OS/390). Is there any known workaround? ---------------------------------------------------------------------------- -------------------- To: Multiple recipients of list SAMBA <samba@samba.org> Subject: Symantec Ghost and Samba From: Christopher Robert Woods

Have two XP laptops that I am trying to get to back up to a Samba share with Norton Ghost 2003. My laptop is "gtwylptp" and my son's, a Dell 8600 with a broadcom 440x NIC, is "stu07-53". I am the user and group backing up both machines. "gtwylptp" backs up without a problem however "stu07-53" hangs as apparently the Lock file has "RDONLY"

HI: i just trying memdisk that comes with syslinux 3.35. i try to load a dos image, which contains ghost verison 8.3 and ghost version 11. both version of ghost hangs when start-up. memdisk that comes with 3.40 pre is ok. and many earlier versions is ok too. i try some parameter like "safeint","raw". but none work. i use memdisk with pxelinux, below is part of my

Hi List. We have a Samba 3.0pre21 PDC set up here on our prim. fileserver. We use Windows 2000 SP2 on our PC clients. We install clients with system images from disk and than install applications from one central machine running Norton Ghost EE. Ghost has the functionality not only to install the software from the "console" on the ghost server, but it is also able to make the

I search for long time to make works ghost floppy image "out of the box" with syslinux without success. The only solution i found is to modify the the file generated by ghost boot wizard. the ghost boot wizard generate a "file.sys" i made (with the help of irc helper) a script to modify this file : you have to put the file.sys without extension as parameter #!/bin/bash

Hi, I'd like to create a bootable CD to run Ghost. Before generating the .iso, I tested it on a system with a FAT partition and had syslinux-4.05 installed. However it failed. Here are the steps : 1. copied "memdisk" to the FAT partition. 2. as my copy of Ghost (v11.50 from solution suite v2.5) no longer fits on a single floppy, I created a "large" floppy image of size

I was thinking of putting a slightly bigger HD on my Linux server and would like to know the easiest way. I know that ghost works well on FAT32 partitions, but does it work on Ext3 partitions too? Id rather not reinstall if I don't have to, so any and all suggestions are appreciated. TIA Kev

I will really hate myself if this has already been solved, i searched the archives but didn't really find anything pertaining to it. I have a 2.88mb dos boot floppy image, with ghost.exe, dos nic drivers, and dos system files. It works fine when burnt to a cd. As for the thumbdrive when trying to configure this hpghost.ima file to run from my syslinux.cfg menu, it works and boots up fine but

Chris Lattner wrote: > On Thu, 2 Mar 2006, Vladimir Prus wrote: >>>> The instructions seem to have one path wrong. It says to get: >>> >>> I'll put together a tarball today. That will be easier than dealing >>> with a patch, and it will include a bunch of bugfixes since the previous >>> email. >> Further into process, I get this error:

Greetings again, I am experiencing a lockup when ghost casting about 1 out of 5 client machines locks up. I don't recall if I was having this issue when I was using 3com pxe menus or not. I was wondering if the issue I am seeing could be caused by pxelinux since it basically is loading a Linux kernel then booting a MSDos.imz file. I cannot find any errors from the ghostcast side or the

Reposted to the moved mailing list... would be nice if the subscribe at the old mailman page were disabled. Btrfs-specific material near the end of the mail. Attachment omitted, available from the lkml post. ---------- Forwarded Message ---------- Subject: [RFC] Improved versioned pointer algorithms Date: Sunday 13 July 2008 01:55 From: Daniel Phillips <phillips@phunq.net> To:

I've Found a page with interesing discussion about images backup http://forums.fedoraforum.org/archive/index.php/t-28255.html This give a "dirty" solucion for remove special thing of ext3 (Selinux remove resize_inode and ext_attr features) witch cause the error in ghost. I hope somebody help with the problem of norton ghost and clone centos 4. :) ----------- sfabkk 2005-07-11,

Lars, You could try a batch file with NETDOM /Domain:MYDOMAIN /user:adminuser /password:apassword MEMBER MYCOMPUTER /JOINDOMAIN Then NETDOM /Domain:MYDOMAIN MEMBER MYCOMPUTER /JOINDOMAIN search microsoft.com for comand line join domain for more info. Bob -----Original Message----- From: Lars O. Grobe [mailto:grobe@gmx.net] Sent: Wednesday, December 18, 2002 7:53 AM To: