search for: fxog

I'm having trouble with a WX100USB adapter and a Siemens Gigaset cordless phone. If I select fxols as a signalling method, calls are being disconnected. Usually after about 4 minutes, and asterisk just says that the phone has hung up. If I choose fxogs, I immediately get a LINE IN USE message on my phone and I can't even get a dialtone. If I choose fxoks, it mostly works, but sometimes after making a call the adapter will get stuck in a LINE IN USE state, too. I don't know of a proper way to correct it, sometimes disconnecting the USB a...

...#39;t get mine to work, I tried all the obvious settings. The cb-24 gets stuck at init ESF framing, as if it's not seeing the t1 card at all. It does get a t1 carrier (detecting voltage??) Help! Thanks.. Everything appears to look good on the server, I did: [zaptel.conf] span=1,0,0,esf,b8zs fxogs=1-24 [zapata.conf] signalling=fxo_gs channel => 1-24 Tried ks, ls, still no dice. ztcfg -vvv reports: SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: FXO Groundstart (Default) (Slaves: 01) Channel 02: FXO Groundstart (Default) (Slaves: 02) Channel 03: FX...

...n I call to the Alcatel PBX, the asterisk show me in it console that es ringing but never anwer. I had configured with diferent signalling: 1- zaptel.conf -> fxoks=3,4 zapata.conf -> signalling=fxo_ks 2- zaptel.conf -> fxols=3,4 zapata.conf -> signalling=fxo_ls 3- zaptel.conf -> fxogs=3,4 zapata.conf -> signalling=fxo_gs I put 3,4 because 1,2 are connected to Panasonic PBX (working with ks). But the PBX never anwer. I also change the zone (because the PBX es french): zaptel.conf -> loadzone=fr defaultzone=fr But it doesn't work. My files: * zaptel....

...annel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart protocol. # "fxoks" : Channel(s) are signalled using FXO Koolstart protocol. # # You may also specify a default zone with "defaultzone=<zone>" where zone # is a two letter country code. # fxsks=1 fxsks=2 fxsks=3...

...annel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart protocol. # "fxoks" : Channel(s) are signalled using FXO Koolstart protocol. # "sf" : Channel(s) are signalled using in-band single freq tone. # Syntax as follows: # channel# => sf:...

...l(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart protocol. # "fxoks" : Channel(s) are signalled using FXO Koolstart protocol. # "sf" : Channel(s) are signalled using in-band single freq tone. # Syntax as follows: # channel# => sf:<rxfreq>,<rxbw&...

...annel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart protocol. # "fxoks" : Channel(s) are signalled using FXO Koolstart protocol. # "sf" : Channel(s) are signalled using in-band single freq tone. # Syntax as follows: # channel# => sf:&...

...l(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart protocol. # "fxoks" : Channel(s) are signalled using FXO Koolstart protocol. # "sf" : Channel(s) are signalled using in-band single freq tone. # Syntax as follows: # channel# =>...

...annel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart protocol. # "fxoks" : Channel(s) are signalled using FXO Koolstart protocol. # "sf" : Channel(s) are signalled using in-band single freq tone. # Syntax as follows: # channel# => sf:<rxfreq>,<rxbw>...

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf

...annel(s) are signalled using FXS Loopstart protocol. # "fxsgs" : Channel(s) are signalled using FXS Groundstart protocol. # "fxsks" : Channel(s) are signalled using FXS Koolstart protocol. # "fxols" : Channel(s) are signalled using FXO Loopstart protocol. # "fxogs" : Channel(s) are signalled using FXO Groundstart protocol. # "fxoks" : Channel(s) are signalled using FXO Koolstart protocol. # "sf" : Channel(s) are signalled using in-band single freq tone. # Syntax as follows: # channel# => sf:<rxfreq>,<rxbw>...