search for: featdmf

I've recently started PIC'ing some calls into a asterisk box across a feature group D trunk from Verizon. Everything seems to work ok, except for some reason Asterisk doesn't grab the full caller ID from Verizon. I can see that they do send it, but Asterisk drops the first 2 numbers. Looking at the debug log I see. I see that Verizon is sending the digits and the asterisk debug seems

I know this topic has been covered before - I just want to make sure I am understanding this correctly. | ------------------- | | | | T1 | Channel Bank | | ----------| | | | T1 Cross | | | | | | | | ------------------- -------------- | Asterisk | | | |

I currrently have Asterisk 1.2.8 with a TE110P Zaptel card tied to our Nortal DMS-10 switch via T1. This T1 trunk is configured for Feature Group D MF. The purpose of this is for LD delivery to a VoIP LD provider as a LD choice for our customers off of the DMS-10. When I sieze a channel on the zaptel, I get a spill of digits from the switch that is the called number, and I can see that in

...================== I've searched for alternatives signalling types and found these. But nothing was found as to exactly what happens during inbound or outbound calls - (is dial tone provided or not) a.. em_w: E & M Wink Start a.. featd: Feature Group D (The fake, Adtran style, DTMF) a.. featdmf_ta: Feature Group D (The real thing, MF (domestic, US)) through a Tandem Access point a.. fgccama Feature Group C-CAMA (DP DNIS, MF ANI) a.. fgccamamf Feature Group C-CAMA MF (MF DNIS, MF ANI) a.. featdmf: Feature Group D (The real thing, MF (domestic, US)) a.. featb: Feature Group B (MF (domestic...

...==================== I've searched for alternatives signalling types and found these. But nothing was found as to exactly what happens during inbound or outbound calls - (is dial tone provided or not) a.. em_w: E & M Wink Start a.. featd: Feature Group D (The fake, Adtran style, DTMF) a.. featdmf_ta: Feature Group D (The real thing, MF (domestic, US)) through a Tandem Access point a.. fgccama Feature Group C-CAMA (DP DNIS, MF ANI) a.. fgccamamf Feature Group C-CAMA MF (MF DNIS, MF ANI) a.. featdmf: Feature Group D (The real thing, MF (domestic, US)) a.. featb: Feature Group B (MF (domestic,...

I am an Asterisk newby, and I cannot seem to get Caller ID information from our T1 line. When calls appear at the phones, they say the call came from "asterisk" and unknown number. I know how Caller ID information is passed on an analog phone line (between the rings) but with a T1 line, I don't know technically how it is done. I don't see the caller's number in the

Has anyone ever setup Asterisk to pass Feature Group D access while using a CIC code for outbound calls? If so can you please email the configuration you have done? I have tried to get this up and running but with no luck. I have also contacted support and I cant seem to get this going. Thanks in Advance, Jason Miller

...al ISDN ; international: International ISDN ; ;pridialplan=national ; ; Overlap dialing mode (sending overlap digits) ; ;overlapdial=yes ; ; Signalling method (default is fxs). Valid values: ; em: E & M ; em_w: E & M Wink ; featd: Feature Group D (The fake, Adtran style, DTMF) ; featdmf: Feature Group D (The real thing, MF (domestic, US)) ; featb: Feature Group B (MF (domestic, US)) ; fxs_ls: FXS (Loop Start) ; fxs_gs: FXS (Ground Start) ; fxs_ks: FXS (Kewl Start) ; fxo_ls: FXO (Loop Start) ; fxo_gs: FXO (Ground Start) ; fxo_ks: FXO (Kewl Start) ; pri_cpe: PRI signalling,...

...ngestion out of band with RELEASE/DISCONNECT ; inband: Signal Busy/Congestion using in-band tones ; ; priindication = outofband ; ; ; Signalling method (default is fxs). Valid values: ; em: E & M ; em_w: E & M Wink ; featd: Feature Group D (The fake, Adtran style, DTMF) ; featdmf: Feature Group D (The real thing, MF (domestic, US)) ; featb: Feature Group B (MF (domestic, US)) ; fxs_ls: FXS (Loop Start) ; fxs_gs: FXS (Ground Start) ; fxs_ks: FXS (Kewl Start) ; fxo_ls: FXO (Loop Start) ; fxo_gs: FXO (Ground Start) ; fxo_ks: FXO (Kewl Start) ; pri_cpe: PRI signalling,...

...al ISDN ; international: International ISDN ; ;pridialplan=national ; ; Overlap dialing mode (sending overlap digits) ; ;overlapdial=yes ; ; Signalling method (default is fxs). Valid values: ; em: E & M ; em_w: E & M Wink ; featd: Feature Group D (The fake, Adtran style, DTMF) ; featdmf: Feature Group D (The real thing, MF (domestic, US)) ; featb: Feature Group B (MF (domestic, US)) ; fxs_ls: FXS (Loop Start) ; fxs_gs: FXS (Ground Start) ; fxs_ks: FXS (Kewl Start) ; fxo_ls: FXO (Loop Start) ; fxo_gs: FXO (Ground Start) ; fxo_ks: FXO (Kewl Start) ; pri_cpe: PRI signalling,...

...l ISDN ; international: International ISDN ; ;pridialplan=national ; ; Overlap dialing mode (sending overlap digits) ; ;overlapdial=yes ; ; Signalling method (default is fxs). Valid values: ; em: E & M ; em_w: E & M Wink ; featd: Feature Group D (The fake, Adtran style, DTMF) ; featdmf: Feature Group D (The real thing, MF (domestic, US)) ; featb: Feature Group B (MF (domestic, US)) ; fxs_ls: FXS (Loop Start) ; fxs_gs: FXS (Ground Start) ; fxs_ks: FXS (Kewl Start) ; fxo_ls: FXO (Loop Start) ; fxo_gs: FXO (Ground Start) ; fxo_ks: FXO (Kewl Start) ; pri_cpe: PRI signalling,...

Help. Why is it that I can call out from my GSBudgetone SIP phone but the audio is "one-way'? Why is it that when I call my asterisk phone number, I get a fast busy?