Displaying 20 results from an estimated 90 matches for "fdc0".
Did you mean:
fd0
2007 Dec 27
2
Failure of gvinum after panic
...,0x4aec-0x4aef,0x4af8-0x4aff,0x4b00-0x4b03,0x4b10-0x4b1f
irq 19 at device 2.0 on pci1
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <Promise PDC20268 UDMA100 controller> port
0x4b08-0x4b0f,0x4b04-0x4b07,0x4b20-0x4b27,0x4b28-0x4b2b,0x4b30-0x4b3f
mem 0xc0fdc000-0xc0fdffff irq 19 at device 3.0 on pci1
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy driv...
2003 Oct 01
1
Upgrade to 4.8 STABLE - Root mount failed: 6
...mainboard0: <CPQ0551 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on isab0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff
on isa0
ep0: <3Com 3C509-Combo EtherLink III> at port 0x320-0x32f irq 10 on isa0
ep0: Ethernet address 00:a0:24:1d:1a:50
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)&...
2003 Aug 01
0
gdb coredumps
...t;PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> at device 17.1 on pci0
atapci0: ATA channel disabled by BIOS
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff,0xd4000-0xd4fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)&...
2003 Jul 17
1
device troubles after stable update
...3:2c:74
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at...
2003 Jun 04
1
Broken -STABLE kernel build?
...CMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
d...
2003 Sep 29
3
Frequent reboots...
Hello,
I am having a problem with a new server running FreeBSD 4.9-PRERELEASE.
Once every two days or so, it reboots itself.. there is no exact time of the day it reboots..
It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today).
I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...
2003 Nov 03
3
(long) high traffic syslog server.
...on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 20.2 irq 0
chip1: <Intel 82371AB Power management controller> at device 20.3 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xe
e000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at...
2003 Aug 09
0
USB problems (I/O-Error => USB da(4) quirks, uscanner0)
...Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem 0xdffffd00-0xdffffdff
irq 11 at device 18.0 on pci0
vr0: Ethernet address: 00:e0:18:ad:3a:7f
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at...
2003 May 16
2
make installworld fails : touch not found ?
...device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
# needs CAM to be present (scbus & pass)
options ATA_STATIC_ID
device wdc0 at isa? port IO_WD1 irq 14
device wcd
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device pci
device agp
device miibus
device fxp # Intel Et...
2003 Aug 22
1
nforce2 usb is broken on -stable
...options CPU_ATHLON_SSE_HACK
options CPU_ENABLE_SSE
options NO_F00F_HACK
# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
options HTT # HyperThreading Technology
device isa
device eisa
device pci
device apm
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
d...
2006 Oct 01
4
HEADS UP: FreeBSD 5.3, 5.4, 6.0 EoLs coming soon
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello Everyone,
On October 31st, FreeBSD 5.3 and FreeBSD 5.4 will have reached their
End of Life and will no longer be supported by the FreeBSD Security
Team. Users of either of those FreeBSD releases are strongly encouraged
to upgrade to FreeBSD 5.5 or FreeBSD 6.1 before that date.
In addition, the FreeBSD 6.0 End of Life is presently scheduled
2003 Aug 03
0
Multiple kld loads?
...00-0x801f irq 9 at device
17.0 on pci0
ed0: address 00:00:e8:e6:91:3b, type NE2000 (16 bit)
pci0: <S3 ViRGE DX/GX graphics accelerator> at 18.0
eisa0: <EISA bus> on motherboard
eisa0: unknown card FP@0000 (0x1a000000) at slot 7
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at...
2013 Jun 19
0
Re: FreeBSD PVHVM call for testing
...0: <XenStore> on xenpci0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
ppc0: <Parallel port> port 0x378-0x37f irq 7 on a...
2003 Apr 07
1
kmem_malloc crash with 4.8
...ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 4
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at...
2003 Sep 05
2
HEADS UP: ATA bus dma code MFC'd
If you start to experience problems with ata devices, please
direct your report this way.
Thanks
-lq
2003 May 13
0
Health monitoring
...on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff,0xcf000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa000...
2003 Oct 01
0
AC-97 problem between RELENG_4_8 and RELENG_4
...cdc0-0xcdff,0xce00-0xceff irq 11 at device 31.5 on pci0
pcm0: <unknown ac97 codec> (id=0x594d4803)
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
isa0: too many memory ranges
isa0: too many ports
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Gene...
2003 Jul 27
2
SMP Problems with 4.8-RELEASE
...tions SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device pci
#device agp
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd #...
2003 Apr 14
1
em0: watchdog timeout -- resetting
...7, 32/253 SCBs
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> mem
0xfecc0000-0xfecdffff irq 17 at device 16.0 on pci0
em0: Speed:1000 Mbps Duplex:Full
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xccfff,0xe0000-0xe3fff,0xe4000-0xeffff
on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa000...
2003 Aug 11
1
vinum (root on vinum too) throw_rude_remark crash: endless loop
...t; at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 12 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at...