search for: f1000000

...r 00:30:48:87:99:29 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:211410 errors:0 dropped:0 overruns:0 frame:0 TX packets:566435 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:135919959 (129.6 MiB) TX bytes:162558207 (155.0 MiB) Base address:0xd100 Memory:f1000000-f1020000 # lsmod Module Size Used by ipt_ipp2p 6400 0 ipt_LOG 5248 2 xt_multiport 2176 4 ipt_layer7 8840 14 cls_u32 5636 6 sch_esfq 4736 10 xt_CLASSIFY 1024 28 xt_limit...

My new GTX 960 (GM206, I think) says: [ 10.329351] nouveau ![ DEVICE][0000:09:00.0] unknown Maxwell chipset [ 10.329355] nouveau E[ DEVICE][0000:09:00.0] unknown chipset, 0x126010a1 [ 10.329356] nouveau E[ DRM] failed to create 0x00000080, -22 [ 10.330129] nouveau: probe of 0000:09:00.0 failed with error -22 Hacking up nouveau so that it treats it like a GM204 doesn't work. Are

...ICAST MTU:1500 Metric:1 >> RX packets:211410 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:566435 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:100 >> RX bytes:135919959 (129.6 MiB) TX bytes:162558207 (155.0 MiB) >> Base address:0xd100 Memory:f1000000-f1020000 >> >> # lsmod >> Module Size Used by >> ipt_ipp2p 6400 0 >> ipt_LOG 5248 2 >> xt_multiport 2176 4 >> ipt_layer7 8840 14 >> cls_u32 5636 6 >> sc...

Hello! I'm getting this backtrace every time I boot: resource map sanity check conflict: 0xf0000000 0xf1ffffff 0xf1000000 0xf112bfff BOOTFB ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1 at /home/proskin/src/linux/arch/x86/mm/ioremap.c:171 __ioremap_caller+0x372/0x380() Info: mapping multiple BARs. Your kernel is fine. Modules linked in: CPU: 6 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc1-00021-g8f98ef7...

...lly uses graphic mode on my card. That mode is supported by simplefb. However, the resource conflict happens regardless of whether simplefb is enabled. It's sysfb_simplefb that causes it, a completely different driver. If GRUB keeps the graphic mode, I have this entry in /proc/iomem: f1000000-f112bfff : BOOTFB It is reserved by sysfb_simplefb. Nouveau tries to map an area at 0xf0000000-0xf1ffffff, so it includes the existing resource without being equivalent to it. Nouveau correctly calls remove_conflicting_framebuffers() before trying to map that resource. However, sysfb_simplefb i...

...to IRQ 16 Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 4000 [size=128] Expansion ROM at f1000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau Kernel modules: nouveau -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <ht...

...puter Inc. Device 075f Physical Slot: 4 Flags: bus master, fast devsel, latency 0, IRQ 32 Memory at ee000000 (32-bit, non-prefetchable) [size=32M] Memory at e0000000 (64-bit, prefetchable) [size=128M] Memory at e8000000 (64-bit, prefetchable) [size=64M] I/O ports at c100 [size=128] Expansion ROM at f1000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia 00:05.0 Audio device: NVIDIA Cor...

...That mode is supported by > simplefb. However, the resource conflict happens regardless of whether > simplefb is enabled. It's sysfb_simplefb that causes it, a completely > different driver. > > If GRUB keeps the graphic mode, I have this entry in /proc/iomem: > > f1000000-f112bfff : BOOTFB > > It is reserved by sysfb_simplefb. Nouveau tries to map an area at > 0xf0000000-0xf1ffffff, so it includes the existing resource without > being equivalent to it. > > Nouveau correctly calls remove_conflicting_framebuffers() before trying > to map that r...

...]) Subsystem: Lenovo Device 21d1 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f0000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at 5000 [size=128] Expansion ROM at f1000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128]...

...actrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter number 1 dmesg reveals that lincfg.c has reported the error : DIVA Server Driver - initialising DIVA Server Driver - Version 2.0.16 Divas: DIVA Server BRI (U) Found Divas: DIVA I/O Base already in use 0xf1000000-0xf100001f Divas: 0 cards detected Divas: Not loaded (here's the code that produces it ...) if (check_region(Card.io_base, 0x20)) { printk(KERN_WARNING "Divas: DIVA I/O Base already in use 0x%x-0x%x\n", Card.io_base, Card.io_base + 0x1F); wDeviceIndex++;...

...puter Inc. Device 075f Physical Slot: 4 Flags: bus master, fast devsel, latency 0, IRQ 32 Memory at ee000000 (32-bit, non-prefetchable) [size=32M] Memory at e0000000 (64-bit, prefetchable) [size=128M] Memory at e8000000 (64-bit, prefetchable) [size=64M] I/O ports at c100 [size=128] Expansion ROM at f1000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia 00:05.0 Audio device: NVIDIA Cor...

Hey folks, I stumbled across the Mastershaper project ( http://www.mastershaper.org/ ) but I have a little problem: I wanted to shape the traffic coming from the router itself aswell as coming from the LAN behind the router, for that task I need IMQ, but with IMQ iptables-(layer7)-matching is not possible. Now I''ve talked with the programmer and he said the following: >The problem is

...em+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 35 Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f2000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at cc80 [size=128] [virtual] Expansion ROM at f0f00000 [disabled] [size=128K]...

Hi, everyone! I am working on xen-4.2.0 with spice remote connect. My host is Fedora 14 and guest is win7. I have installed spice package and now I can connect to guest by spice client. For better graphics experience, I want to try the VGA passthrough. With spice tool, I have to create a VM by xl command, and now I am wondering if it supports VGA passghrouth? If so, how should I test it ?

...DCB conn 02: 00000200 1 nouveau 0000:03:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). 1 nouveau 0000:03:00.0: DRM: MM: using COPY0 for buffer copies 1 nouveau 0000:03:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo f1000000 1 nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device 110 nouveau 0000:03:00.0: fifo: INTR 01000000: 00000005 1 nouveau 0000:03:00.0: DRM: suspending console... 1 nouveau 0000:03:00.0: DRM: suspending display... 1 nouveau 0000:03:00.0: DRM: evicting buffers......

https://bugs.freedesktop.org/show_bug.cgi?id=78530 Priority: medium Bug ID: 78530 Assignee: nouveau at lists.freedesktop.org Summary: Memory corruption on Lenovo t440p with runpm QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified OS: All Reporter: nikoamia at gmail.com

https://bugs.freedesktop.org/show_bug.cgi?id=109681 Bug ID: 109681 Summary: Nvidia GT710 => nouveau + wayland + swayWM => crash when use acceleration (open Firefox) Product: Mesa Version: 18.3 Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: critical

On Wed, Jul 9, 2008 at 1:12 PM, Tim <tim at tcsac.net> wrote: > Perfect. Which means good ol'' supermicro would come through :) WOHOO! > > AOC-USAS-L8i > > http://www.supermicro.com/products/accessories/addon/AOC-USAS-L8i.cfm Is this card new? I''m not finding it at the usual places like Newegg, etc. It looks like the LSI SAS3081E-R, but probably at 1/2 the

http://bugs.freedesktop.org/show_bug.cgi?id=21273 Summary: Driver can't detect video output and xserver doesn't start Product: xorg Version: git Platform: PowerPC OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo:

Hi developers, I met some domU issues and the log suggests missing interrupt. Details from here: http://www.gossamer-threads.com/lists/xen/users/263938#263938 In summary, this is the suspicious log: (XEN) vmsi.c:122:d32767 Unsupported delivery mode 3 I''ve checked the code in question and found that mode 3 is an ''reserved_1'' mode. I want to trace down the source of this