search for: extns

Are there any Snom 200 users that have two extns defined on their phone? I've been trying to get two (or more) extns defined in such a way that when extn #1 rings, LED #1 flashs; extn #2 rings, LED #2 flashes, etc. (Answer greating will be different depending upon which extension is called.) I can get multiple extns to register and work wit...

...AMP for Channel 4 context=from-pstn group=0 channel => 4 ; Span 2: ZTDUMMY/1 "ZTDUMMY/1 1" My problem is getting 234 to answer when I dial 282 from the Alcatel as I have nothing set up for it and don't seem to be able to work out how to direct different FXO ports to different * extns. I am told that my Alcatel is not passing any info (DID number etc) down the line Any help would be greatfully appreciated. Regards Andy Green IT Manager GB eye Ltd 1 Russell St Kelham Island Sheffield S3 8RW Tel: 0114 252 1611 Fax: 0114 272 9599 <mailto:andy@gbeye.com> mailto:andy@g...

...isco [fiji] callerid="crisco" <142> type=friend host=dynamic port=5060 secret=pfui qualify=1000 dtmfmode=rfc2833 canreinvite=yes context=in-internal extensions.conf [in-internal] exten => s,1,Answer exten => 141,1,GoTo(int_extns,s,1) ; spa-x000 exten => 142,1,GoTo(int_extns,s,1) ; 7960 [in-internal] exten => s,1,Answer exten => s,2,DigitTimeout,5 exten => s,3,ResponseTimeout,10 exten => s,4,PlayTones(dial) exten => 141,1,Macro(dial-extension,marais) exten => 142,1,Ma...

Dear All, I seem to have stumbled across an AGI problem; I have written an AGI Script (bottom of this email); The script does the following; Makes a CDR entry when called Records the call Updates the CDR Finds a corresponding DNIS from the SMDR table (captured via a serial port logger) Matches up the record and updates the CDR. The script works perfectly in my test lab and has been doing so

On 12/25/2014 01:43 PM, Ady wrote: > >> >> >> On 12/25/2014 04:33 AM, H. Peter Anvin wrote: >>> On 12/24/2014 12:16 AM, Robert Yang wrote: >>>> Hello syslinux, >>>> >>>> Merry Christmas! These patches will make extlinux work with umounted >>>> ext2/3/4 filesystem, for example: >>>> >>>> $ extlinux

...>> Von: asterisk-users-admin@lists.digium.com [mailto:asterisk-users- >> admin@lists.digium.com] Im Auftrag von Olle E. Johansson >> Gesendet: Donnerstag, 1. Januar 2004 11:57 >> An: asterisk-users@lists.digium.com >> Betreff: Re: AW: [Asterisk-Users] Snom 200 with two extns defined anyone? >> >> Christian Stredicke wrote: >> > We at snom have problems with Asterisk when we receive calls without the >> > line indication. When we register we place a contact like this: >> > >> > REGISTER sip:asterisk SIP/2.0 >> >...

> > > On 12/25/2014 04:33 AM, H. Peter Anvin wrote: > > On 12/24/2014 12:16 AM, Robert Yang wrote: > >> Hello syslinux, > >> > >> Merry Christmas! These patches will make extlinux work with umounted > >> ext2/3/4 filesystem, for example: > >> > >> $ extlinux -i /dev/sdXN > >> or > >> $ extlinux -i file_block

Hello Everybody, I have a genuine problem in Asterisk setup. I have three inbound trunks in my asterisk box, everything is working fine but the only problem is when any user make an out- going call through his/her extension it goes with same number labeled on this. Can we set each of these lines to have fixed outgoing numbers like if extn: 201 make an outgoing call the recipient should

Here is the current dial plan section: [custom-michael] exten => _900,1,Playback(custom/extn-xfer) exten => _900,2,SayDigits(${EXTEN}) exten => _900,3,MixMonitor........... exten => _900,4,Dial(SIP/${EXTEN}|${DEFRT}) exten => _900,5,Playback(custom/extn-xfer2) exten => _900,6,Goto(custom-michael,901,4) exten => _901,1,Playback(custom/extn-xfer) exten =>

On 12/25/2014 04:33 AM, H. Peter Anvin wrote: > On 12/24/2014 12:16 AM, Robert Yang wrote: >> Hello syslinux, >> >> Merry Christmas! These patches will make extlinux work with umounted >> ext2/3/4 filesystem, for example: >> >> $ extlinux -i /dev/sdXN >> or >> $ extlinux -i file_block >> >> Also it can work with something like:

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command

> > Hi Ady, > > Thank you very much, I prefer this one, add the extN support to > linux/syslinux-nomtools, create a new "e2fs/syslinux" may make things > more complicated for the user, I will make it as: > > 1) If it is a extN device, then root privilege is not required. > 2) Otherwise work as before. > > Any suggestions is appreciated. > > //

...Users, This is my first post so please be kind :-) I am using asterisk@home <mailto:asterisk@home> with freePBX talking to an Alcatel 2400 analogue port via a Digium TDM01B - 1 FXO card I can make calls into the asterisk by dialling the asterisk extn number from the 4200. I can dial extns on the 4200 from asterisk by dialling 9(4200extn number) if I don't have any Outbound Dial prefix of 9 in my Trunk ZAP/g0 If I try to dial 9PSTN (90114xxxxxxx) number with this setting I get the autoattendant on my 4200 (the autoattendant is on Extn 0) If i put an Outbound Dial prefix of 9...

Running the latest * CVS and Cisco 7960G and 7940G phones with SIP 6.3 image. I have figured out how to turn on the DND feature through the Settings>Call Preferences>Do Not Disturb - Yes then Save. This puts the phone into DND On and shows a DND image above the far right soft key which you use to turn off DND. There should be a better way. An on/off toggle of the soft key that it

The followings WORKS OK in Syslinux-4.06 LABEL ** ^TEST IMG/ISO File. kernel /test/memdisk initrd test/filename.iso append iso # [if not use iso raw] TEXT HELP [Tab] >Use (i) iso initrd=test/filename.iso OR (ii) initrd=test/filename.extn ENDTEXT However sorry to say FAILS in Syslinux-5.01 Thanks in advance. Prof S W Damle

Folks: does anybody have an idea? how to capture the DTMF digits to a file, after an extn asnwer? then POST it to a url? Regards, JR

Hello I have created an iax exten in my iax.conf file: [300] type=friend username=300 secret=*** context=default host=dynamic callerid="some name" <300> auth=md5 Then in my extensions.conf I have: exten => 300,1,Dial(IAX/${EXTEN},20) exten => 300,2,Hangup I can dial from iaxComm (a soft IAX client) and that works fine. But when I try to dial 300 get: WARNING[22077]:

pstn -> sip gw -> * -> C7960 When I dial into * via the pstn, I hear the ivr menu just fine (good quality). I press 3000 (valid extn), and I begin to hear ringing however the ring back is very very choppy. I answer the C7960, and speech is clear in both directions. Place the C7960 extn on hold, and the MOH is very choppy. Checking 'sip show channels' indicates both the sip gw

Looking for some advanced thoughts relative to exten number assignments. We're in the planning stage for rolling out asterisk at multiple small US telco/isp operations. Their typical voip customer has had their pstn line for a looooong time and wants to keep the pstn line and number, but add voip to their existing home/soho arrangement. One approach (from a planning perspective) is to

Hello Sir, Could provide the solution for the below error ? chan_read_failed for istate 3 Thanks and regards Chandra Prakash Vela Global Operations - Production Engineering Services Computer Sciences Corporation India Private Limited C-24 ,Sector 58,Noida -201301 USA: 1-302-781-1010 Extn. 1957 UK: +44 (0) 870 850 3512 Extn. 1957 Australia: 1800 137 784 Extn. 1957 India: +91-120-2582323