search for: exte

--- server/extents.c | 49 ++++++++++++++++++------------------------------ 1 file changed, 18 insertions(+), 31 deletions(-) diff --git a/server/extents.c b/server/extents.c index 2d609652..4ab5946c 100644 --- a/server/extents.c +++ b/server/extents.c @@ -42,6 +42,7 @@ #include <assert.h> #include &quo...

...'ve implemented a 'page-all' function for some of our customers, and we've noticed that on occasion the page-all will cause asterisk to crash (safe_asterisk then restarts it again). The particular customer has about 20 phones, and also has 5 Linksys 932 to monitor the state of these extensions. I'm not sure whether it is the page-all that causes the crash, or the subsequent NOTIFY storm to all of the 932s that are monitoring those extensions (since the page-all causes them all to go to In-Use and then Idle). Here's a log snippet of right before the crash (previous crashes...

I was trying to install ferret 0.9.2 on solaris (SunOS 5.8) which does not have a sys/dir.h nix_io.c:5:21: sys/dir.h: No such file or directory make: *** [nix_io.o] Error 1 I couldn''t find an obvious way around this... any suggestions? Thanks, Rich Marisa Cornell Information Technologies Cornell University

...= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: G.7xx 384k Video (38) unfortunately using a simple extension like exten => 445,1,Dial(${TRUNK}/04109555502) it is truncted to > Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) >...

On 11/09/2019 21:59, Vincent Sherwood wrote: > Here is the full output > > [user at DCSAMBA4A ~]# ?samba-tool domain join MYDOMAIN ?DC > -U"administrator at mydomain.ext" ?--server=DC2016A.mydomain.ext > Password for [administrator at mydomain.ext]: > INFO 2019-09-11 21:55:09,790 pid:20279 > /usr/local/samba/lib64/python3.6/site-packages/samba/join.py #1563: >

hello everyone, I have a trixbox server with an E1 card(not digium).It connects to an AVAYA pbx use E1. It works fine.But when i change the E1 card to digium TE220B,there is a problem. When sip extension A(on trixbox) call PSTN extension B(on avaya),A must wait longtime before B start to ring.From the log I find there are two times call. I don't know why the first request be rejected while the second request can get correct response.Because the data of the two requests are same ! I ho...

Is there a setting somewhere in * to define whether I am receiving callerID or true ANI? Global Crossing claims they are sending ANI but I dont think so. My understanding of ANI is that it is always sent, regardless if callerID is blocked. If I dial *67 and my DID, I get "Presentation: Presentation prohibited of network provided number" and no number. Before I call GC on Monday

...CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] > -- Hungup 'Zap/2-1' > == No one is available to answer at this time ------------- context [pri2] of Box A: exten => _X.,1,Dial(Zap/r1/${EXTEN}) exten => _X.,2,NoOp(PRI_CAUSE=${PRI_CAUSE} CAUSECODE=${CAUSECODE}) ------------- zapata.conf of Box A & B: [channels] switchtype=euroisdn pridialplan=local prilocaldialplan=local priindication=passthrough ;priindication=outofband ; both tested.. internati...

...VS-07/28/03-14:45:19 and now I cannot recieve the the calls from the zaptel interface which is a E100P with pri signaling. That is something with asterisk becouse rolling back to version from 06/23/03 using the new libpri and zaptel fixes the problem. Here is an exept from the config: [macro-stdexten]; ; ; Standard extension macro: ; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well ; ${ARG2} - Device(s) to ring ; exten => s,1,Dial(${ARG2},20,t) ; Ring the interface, 20 seconds maximum exten => s,2,Voicemail2(u${ARG1}) ; If unavailable, send to voicem...

...bound calls are working fine (from both: Carrier and Siemens). But I am not able to dial wether outbound nor to the Siemens PBX. I allways get the message: == Everyone is busy at this time After hours of googling and reading and trying I seek help... Thank you very much. Felix Deierlein My extension.conf (only important parts): [AtInternal] ;exten => 402,1,Macro(stdexten,402,Zap/g2/402) exten => 402,1,Dial(Zap/g2/595402) [ePInternal] include=>system include=>test include=>AtInternal exten => 812,1,Macro(stdexten,812,${ePFfd}) exten => 814,1,Macro(stdexten,814,${ePFj...

Hi All, I am trying to install Dovecot connecting to MySQL and all seems to be working until I try to send/receive. I'm getting a "Unknown setting" error for anything that is inside dovecot-sql.conf.ext dovecot-sql.conf.ext is inside /etc/dovecot and is referenced from /etc/dovecot/conf.d/auth-sql.conf.ext The error I get is: auth: Fatal: sql

Hi, When have a incoming call from E1 to a extension FXS, and this extension is busy, the incoming call recive ring tone, and it is wrong. What can I do? Thanks in advance Pedro Here is the trace: asterisk-1*CLI> < Protocol Discriminator: Q.931 (8) len=41 < Call Ref: len= 2 (reference 66/0x42) (Originator) < Message type: SETUP...

...-- Executing GotoIf("Zap/1-1", "0?2:3") in new stack -- Goto (macro-officetemplate,s,3) -- Executing Dial("Zap/1-1", "SIP/311|20|r") in new stack -- Called 311 -- SIP/311-ef72 is ringing -- SIP/311-ef72 answered Zap/1-1 == Spawn extension (macro-officetemplate, s, 3) exited non-zero on 'Zap/1-1' in macro 'officetemplate' == Spawn extension (macro-officetemplate, s, 3) exited non-zero on 'Zap/1-1' NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Active > Protocol Discriminator: Q...

Hello! Is it possible to connect Siemens HiPath 4000 to Asterisk? What equipment required on Siemens side? I mean IP not E1. Sorry for asking here. Siemens-related websites use "salesperson language". There is no technical information.

Yes and No. It's confusing to me which is why I ask. Per my initial email my password source is PAM. It's the userdb I'm concerned about ... which dovecot is using /etc/passwd. So dovecot is getting user information from passwd file; password information from PAM. I need to add extra fields for qouta but can't add them to /etc/passwd so I have to create a passwd with the extra

...e type: DISCONNECT (69) < [08 02 80 90] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0) < Ext: 1 Cause: Unknown (16), class = Normal Event (1) ] -- Processing IE 8 (cs0, Cause) -- Channel 0/29, span 2 got hangup request == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'Zap/60-1' in macro 'outisbusy' == Spawn extension (from-alcatel, 0984465691, 3) exited non-zero on 'Zap/60-1' -- Executing GotoIf("Zap/60-1", "0?2:3") in new stack -- Goto (from-alcatel,h,3) -...

Hi, I am trying to add a samba DC to an existing Domain that has 2 Win2016 Domain Controllers but is still running at Domain Functional and Forest levels 2008R2. When I run the join command it goes most of the way through before eventually erring out, and backing out everything it had done. The command I used is samba-tool domain join MYDOMAIN DC -U"administrator at mydomain.ext" -d

Hi, I've been watching my * Console and seems to be one call not well terminated or something: For 5 minutes at least my console is reporting this: ectory|general|ext-local|be: -- Playing 'letters/c' (language 'en') directory|general|ext-local|be: -- Playing 'letters/o' (language 'en') directory|general|ext-local|be: -- Playing 'dir-instr'

Hello, Configuration: Asterisk CVS HEAD 20050730 on RH EL3+ DIGIUM TE110P PRI card + euroISDN E1 I am trying to sort out the problem: 1. Provider's switch sends "SETUP"; 2. Asterisk receives "SETUP", rings allocated extension but does not send "Setup acknowledge" (or any other messages) to switch; 3. After 4 seconds of waiting of *'s response switch sends "SETUP" second time and hangs up line; I have had problem with dialling out via E1 but after adding 'w' postfix (i.e. Dial(Zap/g1...

Hi All After lots of try I was successfull in connecting to PSTN to make and recevice calls , I used AMP for this purpose , now I wanted to try out this Asterisk server answers the call , ask for the extensions and then after the extension entered the call is forwarded /transfered to the extension no , I use Asterisk 1.2.4, configured using AMP , on RHEL3 I did some configuration for my calls to asterisk , my aim was to ask the caller to enter the extension and the transfer the call For th...