search for: expresscard

I bought a laptop with no PCMCIA slot, just expresscard. Instead of using a usb dongle for wireless, I would like to use an expresscard if possible. Ubiquiti makes one that uses atheros chip. Has anyone successfully used an expresscard wifi card in FreeBSD? Any info? Thanks

I'm looking for a well-supported ExpressCard or PCMCIA/CardBus SCSI card that can do at least FastSCSI (Narrow, Wide not necessary) that is supported by CentOS 7. I have an Adaptec SlimSCSI 1460D, but it doesn't seem to be supported (it's previously supported by the aha152x driver). Any ideas are welcomed, other than 'just us...

Just recently bought a Dell E6410 with a Intel? HD Graphics with ExpressCard with I7-640m processor. Having some issues getting a graphical env to work. By just the looks of lspci X is wanting to use the VGA Compatable controller: Intel Corp Core Processor Intergrated graphics controller. Everything else is using Intel Corp Series 5/3400 Series Chipset. Has anyone else had...

Ok, got a quickie. I have an eSATA drive, a 750GB Seagate in an eSATA external enclosure, and a Silicon Image sil3132 ExpressCard controller for my laptop. The disk and controller work great in CentOS 5 (or F7, for that matter), if I specifically mount it. This is not how I want to have to use this drive, however. I want to hotplug it; that is, plug the controller into the laptop, and then plug the drive into the contr...

Hello all, I am thinking about a new laptop. I see that there are a number of higher-performance models (incidenatlly, they are also marketed as "gamer" ones) which offer two SATA 2.5" bays and an SD flash card slot. Vendors usually position the two-HDD bay part as either "get lots of capacity with RAID0 over two HDDs, or get some capacity and some performance by mixing one

...r slot, e.g. "p4p2", not the type of names specified in the web page you reference above (e.g. "enp2s0"). Even my F20 system seems a bit up in the air - what had been called "wlan0" in F17 is now called "wlp3s0" (which seems like one of the new names), but an ExpressCard ethernet plugged into the system is still classified as "p3p1".

...ur patches on my setup in the hope they'd fix my lockups. Unfortunately they didn't, so I'm offering debug assistance to make my system work as well. Here's my setup: - Arch Linux - Lenovo Thinkpad x230 laptop with integrated intel (ivy bridge) - External GPU (eGPU) connected via ExpressCard <-> PCIe adaptor, a nvidia GeForce 650 Ti (Kepler). The PCIe link is unfortunately limited to Gen 1 and one lane. - PRIME with eGPU as primary (following this guide: https://wiki.archlinux.org/index.php/PRIME#Discrete_Card_as_Primary_GPU) - This setup works fine under Windows 10, and the e...

I replaced my development machine with 6 cores, 32 GB etc. I thought it would be simply inserting the existing HDDs and changing /etc/sysconfig/ifcfg-eth0 but, * in the UEFI "BIOS" USB2 and USB3 work. * in C5.11 USB2 works but USB3 does not. * in C6.5 (my install disk; OS be updated to C6.8) USB2 works but USB3 does not. On both C5 and C6 lsusb shows an entry for the plugged-in

I know this is slightly OT but folks discuss zfs compatible hardware here all the time. :) Has anyone used something like this combination? <http://www.cdw.com/shop/products/default.aspx?EDC=1346664> <http://www.cdw.com/shop/products/default.aspx?EDC=1854700> It''d be nice to have externally accessible CF slots for my NAS. I can''t put them into a drive bay because

Problem as follows: 1) Plug in an external USB drive. 2) Mount it anywhere. Doesn't matter how. 3) Copy a few GB of data to the drive from a non-USB disk. 4) Watch the load average "climb" to 5.x, sometimes 10.x or more. Why? This on an otherwise unloaded system. Doesn't matter how many cores, how much RAM, 32/64 bit, etc. Why should copying some files to a USB drive cause

Hi, Does anybody has any experience with e-sata on CentOS5.2? - How fast is it? Same as an internal sata? - Does it support sata-2? - Does it "hot-plug" like a USB? -- Thanks http://www.911networks.com When the network has to work

Hi, When I initially boot my system, it fails to bring up the network. Once booted, if I run "systemctl restart network.service", or even stop, wait a while, then start, it starts up fine and all is well. I'm running Fedora 19 (updated). I followed the instructions on this page to set up a bridged network: http://wiki.libvirt.org/page/Networking I note however that I did *not*

Suppose I have a CentOS 5.7 machine running the default Apache with no extra modules enabled, and with the "yum-updatesd" service running to pull down and install updates as soon as they become available from the repository. (Assume further the password is strong, etc.) On the other hand, suppose that as the admin, I'm not subscribed to any security alert mailing lists which send

Hi everybody, the XCI project appears to have been dormant for a while and there is no project lead for XCI today. In line with Xen governance (see phttp://www.xen.org/projects/governance.html), I would like to first get community views on the health of the project and then schedule an archivation review. Let me quote from the process: "The review is essentially a pitch why the

this series solves different issues we encounter on kepler cards while reclocking: 1. core clock doesn't change at all and produces a volting error (patch 1) this can happen when the voltage table has only 0ed values in the header so we have to parse the entries itself, which contain the right voltages 2. kepler won't clock to highest cstates (patch 2) this happens, because there are

Hello, I tried out kernel 3.1.0-rc2 on my i386 Laptop with Xen 4.1.1. Booting hangs after these messages on the VGA console: pci 0000:02:09.0: address space collision: [mem 0x000da000-0x000dafff] conflicts with reserved [mem 0x0009f800-0x000fffff] reserve RAM buffer: 00000000 0009f000 - 00000000 0009ffff reserve RAM buffer: 00000000 38400000 - 00000000 3bffffff reserve RAM buffer: 00000001

Hello, I tried out kernel 3.1.0-rc2 on my i386 Laptop with Xen 4.1.1. Booting hangs after these messages on the VGA console: pci 0000:02:09.0: address space collision: [mem 0x000da000-0x000dafff] conflicts with reserved [mem 0x0009f800-0x000fffff] reserve RAM buffer: 00000000 0009f000 - 00000000 0009ffff reserve RAM buffer: 00000000 38400000 - 00000000 3bffffff reserve RAM buffer: 00000001