search for: etho

Hi All, I did a clean install of CentOS 5.3 yesterday. During setup I activated both adapters on startup. etho is my public IP and eth1 is my private/internal IP. It did not let me specify nameservers though. So I know this is resolv.conf. I know I put in: nameserver xxx.xxx.xxx.xxx nameserver xxx.xxx.xxx.xxx But how do I put in nameservers for specific networks? Example, I want my public IP to reso...

...ork as well. It seems to me that I'd need to either 1) assign a second IP or 2) get another network card for the Linux box since the 207.78.X.X IP won't be seen on the network anyway. Any advice? Configuration tips? Thanks in advance. ........................................ Sean Brown Ethos Interactive, Inc. http://www.ethos-interactive.com mailto: sbrown@ethos-interactive.com

...seable = yes ?guest ok = yes ??????? directory mask = 0777 ??????? create mask = 0777 ?valid users = @sambausers [quick_p] ?path = /data/embroidery/Quick_P_Outputs ?writeable = yes ?browseable = yes ?guest ok = yes ??????? directory mask = 0777 ??????? create mask = 0777 ?valid users = @sambausers [ethos] ?path = /data/embroidery/ethos ?writeable = yes ?browseable = yes ?guest ok = yes ??????? directory mask = 0777 ??????? create mask = 0777 ?valid users = @sambausers [temp] ?path = /data/embroidery/DST/TEMP ?writeable = yes ?browseable = yes ?guest ok = yes ?directory mask = 0775 ??????? director...

It is working very good :) Thank You. I only need to write Interface etho in maclist file. My MAC addresses don''t neet the ~ in front of. Thanks ! Maciek -- ---- Oferta jakiej jeszcze nie by³o! Serwer www 60 MB za 99 z³ rocznie Szczegó³y: www.oferta.alpha.pl ----

...), that does NOT serve nor squid, nor samba, nor smtp, etc.... single do routing-firewalling. I am something confused by opinions and "presumed" manual and howto that I have read and have confused I more... Then I ask to them you: I must do shaping with the NIC that connect with ISP (etho)... or with the NIC of the LAN (eth1)????... Because I have seen opinions on both possibilities, but I have tested the two and second did not give me good results. In the case of using the NIC to Internet (eth0) I must set like CEIL the bandwidth of downstream (1024kbit) or upstream (256kbit)???...

https://bugzilla.mindrot.org/show_bug.cgi?id=3631 Bug ID: 3631 Summary: ssh fe80 -b invalid argument failure Product: Portable OpenSSH Version: 8.9p1 Hardware: Other OS: Linux Status: NEW Severity: enhancement Priority: P5 Component: ssh Assignee: unassigned-bugs at

Skipped content of type multipart/alternative-------------- next part -------------- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.385 / Virus Database: 268.3.3/298 - Release Date: 2006/03/30

Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration: router / two interface etho and eth1 lan lan is on eth1 and on eth0 I''ve the dsl connection (1.2 Mbit / 256 kbit) I need to limit the bandwith towards lan and I''ve thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15 kBps (128 kbps) and the ot...

Hi all, Is the prio specification in the htb class global or is it on a per class basis ? A simple example: class 1:10 parent 1: class 1:100 parent 1:10 prio 3 class 1:200 parent 1:10 prio 7 class 1:201 parent 1:200 prio 1 class 1:202 parent 1:200 prio 2 Which class will get excessive bandwidth first? 100 or 201/202 ? _______________________________________________ LARTC mailing list

...have no problem with embedded development environments. In my experience, linux server environments are orders of magnitude more complex than embedded environments. True linux kernel experts don't even use debuggers. Of course I wish you well with your efforts. But you need to fully grasp the ethos of the linux kernel development community, before you can succeed at such a goal. enjoy, Karen -- Karen Shaeffer Neuralscape, Mountain View, CA 94040

...ince quite a few changes have been made to remove the capability of cross-compiling R for windows on unix hosts in the last few years. - testing dev snapshots is about trying things and fixing bugs before release. Making it difficult for non-core people to "try", seem to go against that ethos. If that's the case, maybe the repository could be closed off to anonymous check outs altogether, just to make it clear that testing snapshots before releases or even close to release, is not welcomed. Just a thought. - although the official repository of the "main" linux kernel bra...

...cular addresses are supposed to >> take? >> > > Not exactly sure how routing works with aliases on the same interface > but the first thing I would try is the same as you would use on > different interfaces. That is, leave the 'GATEWAY=' on your > internet-facing etho, but remove the entry from the private eth0:192. > Then add a route-eth0:192 file containing the network(s) and > gateway for the private side. The source address it picks should be > the one appropriate to reach the next-hop router specified in your > routes. > I created a fil...

...ors:0 dropped:0 overruns:0 frame:0 TX packets:19 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1119 (1.0 KiB) TX bytes:1119 (1.0 KiB) I''ve tried everything, static, DHCP, etc...but it''s like it doesn''t even see etho. ANy help appreciated. thanks. DomU: _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

On Mon, Apr 29, 2013 at 3:11 PM, Jean-Daniel Dupas <devlists at shadowlab.org> wrote: > Just out of curiosity, what would be the main benefit of this approach vs DKMS which is already widely used ? > Thanks Dupas. I checked DKMS you mentioned, basically DKMS is just a ko and its sources management tool. It's not easy to deploy ko source into target machine, and it's more

Hello, I am having some routing troubles with my Xen setup. I have two domUs, one running as a firewall and another running as a dmz: The dom0 has the following: - eth0 bridge (10.0.0.3/24) The domU-firewall has the following: - Direct passthrough PCI NIC (Public Internet) - Virtual NIC connected to the eth0 bridge on dom0 (10.0.0.1/24) - Bridge called brdmz for the dmz zone (10.0.2.1/24)

...box: https://www.virtualbox.org/wiki/Downloads 3) create a centOS virtual-machine using the ISO file from the previous step. ??Before doing the install, point the CD device to the ISO file. reference: ?http://architects.dzone.com/articles/centos-minimal-installation 4) [optional] modify the ifcfg-etho file: vi /etc/sysconfig/network-scripts/ifcfg-eth0 change: ONBOOT=no to: ??ONBOOT=yes 5) manually start the network: /etc/init.d/network restart 6) get this virtual-machine current: ??yum ?--assumeyes ?update ; ???## have patience while this runs ??yum ?--assumeyes ?install yum-utils; ??yum ?c...

Hi -- subject says all. I just want the code for that function, which I guess was in Venables and Ripley as early as 1994. Well, and for any of the sub-functions that glm.nb calls. I can't install the entire MASS library. If the code for just glm.nb (again, don't want to touch the MASS library, last time I tried to install it was a complete nightmare and fiasco) is somewhere on a

...always trying to convince people to post RFCs early instead of working for months behind closed doors only to be told to rewrite everything in Rust. Why does it have to be internal to a specific company? I see Yi Liu from Intel is helping Cindy get it into shape and that's classic open source ethos. I know some subsystems ignore the RFC tag but I didn't realize iommu is one of these. Is that really true? -- MST

...has to be marked up). Use 'brctl showstp br0' to see. > I feel I have missed some information to register netdevice. > > To add to bridge I did the following: > brctl addbr br0 > brctl addif bro eth0 Typo, I assume you mean br0 > brctl addif br0 firsteth0 > ifconfig etho 0.0.0.0 Another typo. eth0 > ifconfig bro 172.16.2.100 up > > When I try to add IP address to firsteth0, I get a kernel panic!! Well since bridging is at the link, not network layer you shouldn't do that. If it panic's send the console log (backtrace) and it will get fixed. &gt...