search for: etherboot's

Hi, Anyone has tried to use pxechain with Etherboot? Here is my problem: The Etherboot client had no problem to get the list of install servers manual from the pxechain. But didn't matter which server was chosen, Etherboot client always tried to use the first server to do the installation. Etherboot 5.4 was used. What the problem may be? P...

Hi, "David Ehrmann" <exobyte at bigvalley.net> schrieb am 10.07.03 11:02:54: > I've been doing that for a while, but I seem to be finding conflicting > information. Some sources focus on the boot ROM aspect of etherboot > while others think etherboot is an alternative to PXE. Correct me if I'm > wrong, but it seems like there is etherboot the program and etherboot the > protocol. pxelinux is a PXE boot loader, it depends on a PXE-Rom installed in the network card. This loads the config file, a kerne...

Hello! I have been successful using SYSLINUX and Etherboot to create a generic "PXE-on-a-disk" package, a floppy image and CD image that support as many Ethernet cards as possible. These have support for all of Etherboot's modules that support real PCI cards: about 25-or-so drivers and 250-or-so cards. I've built Etherboot ZLILO ima...

Tim Legge has passed the following message on to me: hpa wrote: > Quinn wrote: > > Now it seems I have found a bug in PXELINUX with regards to etherboot. > > Up until 2.07 pxelinux was responsive to the keyboard. From 2.08 and > > up the keyboard is locked at the boot prompt when pxelinux is loaded > > via etherboot 5.3.14. > > That would not be a PXELINUX bug, but an Etherboot bug. The PXE READ > UDP call is defined...

Hi, Peter Lister <P.Lister at sychron.com> schrieb am 06.02.02: > In way way better and easier? When I have criticised pxelinux I think > I've always stated *why* etherboot seems better for our environment. > > I'm not trying to be religious, or get anyone to change a working system > - I'm genuinely interested what differences others perceive. I've looked into etherboot - my problems were: - Network card must be supported, and should (must?) be...

I'm not sure if this belongs here or on an etherboot list. I've given up on trying to get a single floppy syslinux with enough stuff to remote mount a file system. I'm trying an etherboot floppy. When I boot the system finds the dhcp server and gets the right file name but then it gives me the message "not a valid image." A quic...

Hello, I just grabbed http://bits.xensource.com/oss-xen/release/4.2.0-rc2/xen-4.2.0-rc2.tar.gz and tried to build it on Fedora 17 x86_64 host (gcc 4.7.0): make tools: .. make[5]: Entering directory `/root/xen/xen-4.2.0-rc2/tools/firmware'' make -C etherboot all make[6]: Entering directory `/root/xen/xen-4.2.0-rc2/tools/firmware/etherboot'' make -C ipxe/src bin/rtl8139.rom make[7]: Entering directory `/root/xen/xen-4.2.0-rc2/tools/firmware/etherboot/ipxe/src'' [BUILD] bin/isa.o drivers/bus/isa.c: In function ''isabus_probe'...

Folks: I've used etherboot to create a zrom that successfully brings a image of a bootable floppy into high memory. What I'd like to do is glue memdisk in so that it can hook int13 and serve the transferred image for booting when etherboot hands control back to the BIOS. The trick, and this is where I'd appreciat...

This patch set mainly allows the user to build a seabios or rombios only version of hvmloader. In addition, when building a seabios only hvmloader, Option ROMs like vgabios and etherboot are no longer required, and therefore can be disabled from the build. Dependency on the bcc compiler can also be avoided the same way. v2: Separate patches for separate issues Introduced config option to select which NIC to build ROM for Fixed initial patch to build multiple etherboot ROMs...

Hi there, I do not know if it has to do with my english knowledge, but I tried several times to understand the difference beetween Etherboot and PXE-Linux. I know that Etherboot can be put on a Nic's ROM, but for what on h*ll then is the Etherboot floppy for? Please, could someone explain me stupid person these things? Thanks a lot. Greets, Thorsten

Hello PXE folk, I mentioned in another thread that I had problems finding an etherboot that actually works with a 486 and Realtek 8019/NE2000 card. Etherboot worked up until v 5.3.5-mc1 with the ne driver but then stopped working between 5.3.7 to 5.3.13 (anoying since 5.3.7 started supporting PXELINUX. But then I downloaded 5.3.14 and it seems to work again with the ne driver...

...oblem occurs with PXE boot - it is simply doesn't try to do PXE boot, according to what I can see: Booting from Hard Disk... Boot from Hard Disk failed: not a bootable disk FATAL: No bootable device. _ I have: CentOS release 5.4 (Final) , 2.6.18-194.8.1.el5 x86_64 kernel libvirt-0.3.3-7.el5 etherboot-roms-kvm-5.4.4-13.el5.centos libvirt-python-0.3.3-7.el5 etherboot-pxes-5.4.4-13.el5.centos etherboot-zroms-5.4.4-13.el5.centos etherboot-roms-5.4.4-13.el5.centos kvm-36-1 kmod-kvm-36-3 etherboot-zroms-kvm-5.4.4-13.el5.centos What I'm doing wrong? Any help is appreciated. Thanks, Vladimir

...t machine) in > order to perform an automated Linux installation. A boot floppy would > be nice. It seems that there are some commercial solutions around but > is there someting in the OSS arena? I've been googling for it for some > time but no luck. > > Yes I could also use etherboot/netboot (w/o pxelinux) but the point is I > have a install server environment which does work just fine, and would > like to use VMware GSX as a demo setup on my laptop. This should be as > much as the live setup as possible. The two things I know of: - bootix has floppy images of its PXE...

Hi, I need help about the stuff in nilo that gets burnt on a rom to make it a pxe bootrom. In etherboot, it's the file .rom and .lzrom etc. please help me indentify, what component in nilo is used with an eeprom writer to create a pxe bootrom from a 27c512 eprom. thanx and regards, milan -- Powered by Outblaze

Fellow syslinux fans, I'm using syslinux on a boot floppy (I'll call this syslinux A) to invoke an etherboot image (zlilo style) which invokes a tagged NBI image from my DHCP/TFTP server. The tagged NBI image is created using mknbi-dos and also uses syslinux (I'll call this syslinux B), a linux kernel and an initrd file. It works perfectly if syslinux A has a basic .CFG, e.g.: PROMPT 0 TIMEOUT...

...file is following: # PXE SYSLINUX config file - look at # http://syslinux.zytor.com/faq.php for syntax # # ---------- This is gate configure file ------- timeout 20 prompt 1 display motd default gate.zi IPAPPEND 1 I tried this with two old pentiums/133 with 3c509b or rtl8139 ethernet cards with etherboot 5.3.7 (5.3.12 does not work), same result. What is really vexing is that two newer computers - P4 and Athlon ?? that have 'PXE boot' option boot just perfectly using same configuration. I compiled the Syslinux package on P4 linux computer, however this should not matter at all. DHCP /...

Hi, I've been using pxe-enabled nic's with an lzpxe-etherboot image generated by rom-o-matic.net to boot a ltsp.org kernel, with dhcp 3 to use if statements to determine which filename option he gives to the pxe/etherboot dhcp client.Explained at http://www.ltsp.org/documentation/pxe.howto.html This works perfectly, except for the fact that you can't use...

CentOS Errata and Bugfix Advisory 2011:0982 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-0982.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: 218bebfd4e15d2f7a70a030cd1a27cb3 etherboot-pxes-5.4.4-15.el5.centos.x86_64.rpm 6d870664352a31e92c5c604e401960a6 etherboot-roms-5.4.4-15.el5.centos.x86_64.rpm d1c7ac9f24ff8689f0c1506b6cb0eff0 etherboot-roms-kvm-5.4.4-15.el5.centos.x86_64.rpm 37e60ba3563075bde0940a568a09acc4 etherboot-zroms-5.4.4-15.el5.centos.x86_64.rpm b459f4ff062e4fcaf1...

Hi, is there any way to simulate a PXE boot from an Etherboot ROM? Background: I am using PXES in a customer project. PXES supports bootsplash only via pxelinux. The customer machines only have old ISA network cards for which there appears to be no PXE boot rom so I have to use Etherboot. Maybe one could build an NBI image from pxelinux.0 somehow ??? Use a...

On Wed, 9 Mar 2005, Quinn wrote: > I have now also tried etherboot on a AMD Athlon machine with a 3Com 905B > NIC, etherboot 5.3.14 and pxelinux.0-3.08-pre5. Here is the results: > > Etherboot 5.3.14 (GPL) http://etherboot.org > Drivers: 3C90X Images: NBI ELF PXE Exports: PXE > Protocols: DHCP TFTP > Relocating _text from: [00010420,000228...