search for: ejcent

Re-sent because had wrong subject line on first post, sorry. I have just installed * for a small office (P4 3Ghz, 1MB RAM, RH9). It's replacing an analog PBX, and for now, all incoming calls arrive on 10 FXO's. Outgoing calls are via Voicepulse. Phones are SIP, Cisco 7940G's. My problem is random disconnects on both incoming and outgoing calls. The phones are behind a firewall;

Hi, I am sorry if this message has been reposted, but for some reason I am having problems with posting it. I configured asterisk and zaptel modules with fedora2. I want to be able to load the zaptel wcfxo and wcfxs modules. For now I will use only the Wildcard TDM400P card. I am able to load the modules but I cant configure them using ztcfg or zttool because the tools are compiled to use the

So Asterisk can't send VOIP calls to Vonage -- but it is still possible to use Vonage for flat-rate long distance by connecting the Vonage AT-196 to an * FXS port, right? The price is an extra D/A <--> A/D conversion. Jim Shilliday IT Director Equal Justice Center 1315 Walnut St. Suite 400 Philadelphia PA 19107 215-238-6970 -----Original Message----- From: Tim Petlock

My users are reporting that some voicemail messages are being cut off in the middle of being played back. The recordings are OK (they play fine when forwarded to e-mail, and they can often be accessed OK during a later call to voicemail). I found nothing in the archives on this -- ideas anyone? RH9, P4, CVS-HEAD-09/02/04-08:44:34, aggressive echo suppression turned on. Jim Shilliday IT

I'm getting these "calls" at 16 and 46 minutes after every hour. The SIP phone rings, and if we pick up, we get a dial tone. If we don't pick up, we get the dial tone in a voicemail message. An analog phone connected to the incoming POTS line doesn't ring (whether or not * remains connected to the line). It's like the horror movie where the babysitter is getting

This for the archives in case it may help someone: I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP 7.1 as follows: 1. Installed 7.1 images from the Cisco zip file to the TFTP server. 2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and SIPDefault.cnf 3. For the older of the two phones, renamed P003-07-1-00.bin to P0S3-07-.bin, making it

I have just installed * (RH9, P4 3.0GHZ, 1G RAM) in a small office, using three TDM400's with 4 FXO's each for incoming calls. Outgoing calls are (for the moment) routed via VoicePulse. Phone sets are Cisco 7940G's using SIP. I'm getting intermittent echo on outgoing calls, and my understanding, based on reviewing the wiki and several posts here, is this: >>>> The