search for: echocancelold

...;enable/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;Asterisk accountcode to use in CDRs context=capi-in ;context for incoming calls echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=64 ;echo cancel tail setting devices=2 ;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI) and the interesting lines from </etc/aste...

...i.conf --- [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 ;ulaw=yes [reventix] ;ntmode=yes isdnmode=msn incomingmsn=* controller=1 group=1 ;prefix=0 softdtmf=on relaxdtmf=on accountcode= context=reventix-incoming holdtype=local ;immediate=yes ;echosquelch=1 ;echocancel=yes echocancelold=yes ;echotail=64 ;bridge=yes ;callgroup=1 ;deflect=1234567 devices=2 --- snap --- Asterisk is located behind a EURACOM PBX. With chan_capi-cm 0.5.4 it worked good. What's going wrong in my configuration? Regards Bastian

...sk accountcode to use in CDRs context=capi-in ;context for incoming calls ;echosquelch=2 ;_VERY_PRIMITIVE_ echo suppression echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') echocancelold=no ;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) echotail=128 ;echo cancel tail setting devices=2 ;number of concurrent calls on this controller ;(2 makes sense for single BRI, 30 for PRI)

...API INFO 0x3302: Protocol error layer 2 == EICON: CAPI Hangingup == EICON: Interface cleanup PLCI=0x201 == No one is available to answer at this time my capi.conf looks like: [DID] controller=1,2,3,4 isdnmode=did incomingmsn=* softdtmf=on relaxdtmf=on accountcode= context=DID echocancel=yes ;echocancelold=yes devices=2 group=1 __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

...ndler == numeris1: CAPI Hangingup Urgent handler == numeris1: Interface cleanup PLCI=0x101 Urgent handler And here is my capi.conf [numeris1] ;ntmode=yes isdnmode=msn incomingmsn=* controller=1 group=1 ;prefix=0 softdtmf=on relaxdtmf=on accountcode= context=entrant holdtype=local immediate=yes echocancelold=yes devices=2 Cedric Fontaine

...n, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection faxdetect=off ;enable faxdetection and redirection to EXTEN 'fax' for incoming and/or accountcode= ;PBX accountcode to use in CDRs context=from-pstn ;context for incoming calls echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) devices=2 ;number of concurrent calls (b-channels) on this controller [ISDN2] isdnmode=msn ;'MSN' (point-to-multipoint) or 'DID' (direct inward dial) incomingmsn=* ;allow incoming ca...

...TIVE_ echo suppression > > > > > > echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation > > > > > > ;(possible values: 'no', 'yes', 'force', > > > 'g164', > > > > > 'g165')> echocancelold=no ;use facility selector 6 instead of > > > > > correct 8 > > > > > > (necessary for older eicon drivers) > > > > > > echotail=128 ;echo cancel tail setting > > > > > > devices=2 ;number of concurrent calls on this &gt...

...AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection faxdetect=off ;enable faxdetection and redirection to EXTEN 'fax' for incoming and/or accountcode= ;PBX accountcode to use in CDRs context=capi-in ;context for incoming calls echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) devices=2 ;number of concurrent calls (b-channels) on this controller /etc/asterisk/extensions.conf [general] autofallthrough=yes [capi-in] ;calls from isdn interface card exten =&g...

...e/disable software dtmf detection, recommended for AVM cards relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf detection accountcode= ;PBX accountcode to use in CDRs context=isdn-in ;context for incoming calls echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression echocancel=yes ;echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) devices=2 ;number of concurrent calls (b-channels) on this controller ;(2 makes sense for single BRI, 30/23 for PRI/T1) =================excerpts-end==================== - -- Florian Arth...

...=1.0 txgain=2.0 ;rxgain=1.0 ;txgain=1.0 alaw=yes ; ;ulaw=yes ;set this, if you live in u-law world instead of a-law --beppe [ISDN3] ntmode=yes incomingmsn=* controller=3 group=1 ;softdtmf=on ;relaxdtmf=on ;accountcode= context=isdn3in holdtype=local immediate=yes ;echosquelch=1 echocancel=yes ;echocancelold=yes echotail=64 bridge=yes callgroup=1 ;deflect=1234567 devices=2 ====== and this is a piece of what "asterisk -rvvvvvvvvv" says when someone calls ====== == ISDN3: Incoming call 'yyyyyyyyyyyyyy' -> 'xxxxxxxxx' -- Executing Se...

.../pbx/telco which does not send SETUP or SENDING-CO MPLETE. ;echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression ;echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation (yes=g165) ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for ol der eicon drivers) ;echotail=64 ;echo cancel tail setting (default=0 for maximum) ;echocancelnlp=1 ;activate non-linear-processing; this improves echo cancel rati o, but might ;incorporate variable gain...

Hi to all I've mada up my mind and i tried to change from i4l to chan_capi, following some councelling from the gurus. I compiled it up, and when i try to load it in modules.conf, i get that wonderful message and Asterisk does not start: [chan_capi.so]Feb 17 09:21:40 WARNING[16384]: loader.c:239 ast_load_resource: /usr/lib/asterisk/modules/chan_capi.so: undefined symbol: ast_get_group Feb

.../pbx/telco which does not send SETUP or SENDING-CO MPLETE. ;echosquelch=1 ;_VERY_PRIMITIVE_ echo suppression ;echocancel=yes ;EICON DIVA SERVER (CAPI) echo cancelation (yes=g165) ;(possible values: 'no', 'yes', 'force', 'g164', 'g165') echocancelold=yes;use facility selector 6 instead of correct 8 (necessary for ol der eicon drivers) ;echotail=64 ;echo cancel tail setting (default=0 for maximum) ;echocancelnlp=1 ;activate non-linear-processing; this improves echo cancel rati o, but might ;incorporate variable gain...

Hello, I am using a system with an AVM ISDN PCI card (fcpci) and asterisk with chan_capi-cm-0.6. The hardware is connected to a Siemens Hipath 3550 PBX. As a BRI connection has 2 channels and allows 2 simultaneous calls, numbers/MSNs 6391 and 6392 were for provisioned for each channel. The system is working (partly, read on), the trick is the correct cable wiring and setup the PBX's port

...ition to softdtmf, you can use relaxed DTMF detection faxdetect=off ;enable faxdetection and redirection to EXTEN 'fax' for incoming and/or faxdetecttime=0 ;Only detect faxes during the first 'n' seconds of the call. context=isdn-in ;context for incoming calls echocancelold=yes ;use facility selector 6 instead of correct 8 (necessary for older eicon drivers) devices=2 ;number of concurrent calls (B-Channels) on this controller Asterisk console output ----------------------- srvpbx:/usr/src/chan-capi-trunk# asterisk -gc Asterisk 1.6.2.5, Copyright...