search for: dstate_init

...Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 entering identify_ups(0x0665, 0x5161) upsdrv_updateinfo... dstate_init: sock /var/state/ups/newhidups-auto open on fd 5 upsdrv_updateinfo... Waiting for notifications... upsdrv_updateinfo... I've launched upsdrvctl and get this reply : ./upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: New USB/HID UPS driver 0.28 (2.1.0) Detect...

...ransfer.boost.high unavailable initinfo: input.transfer.trim.low unavailable initinfo: input.transfer.high unavailable initinfo: input.transfer.trim.high unavailable Detected (null) on /dev/ttyS0 Syst Stat >0xx0000x< Batt Stat >< Load Stat >xx0x0xxx 1xxxxxxx< Bypass Stat >?< dstate_init: sock /var/state/ups/mge-utalk-ttyS0 open on fd 6 Syst Stat >0xx0000x< Batt Stat >< Load Stat >xx0x0xxx 1xxxxxxx< Bypass Stat >?< Signal 2: exiting cleaning up As you can see, the driver said that the 'Si 1' command is unavailable and it can't get the output of...

...icients: '{5.000000,0.326800,-825.000000,4.563900,-835.820007}' voltage calculation coefficients: '{0.954500,0.000000}' DTR => 0, RTS => 1 input.frequency: 49.10 output.frequency: 49.10 ups.load: 0.2 battery.charge: (null) input.voltage: 232.4 output.voltage: 232.4 STATUS: OL dstate_init: sock /var/state/ups/powercom-ttyS0 open on fd 5 data receiving error (-1 instead of 16 bytes) data receiving error (-1 instead of 16 bytes) data receiving error (-1 instead of 16 bytes) data receiving error (-1 instead of 16 bytes) data receiving error (-1 instead of 16 bytes) And when I disconne...

...0 00 00 00 '.V......' send_cmd: received 56 32 30 32 30 58 58 0d 'V2020XX.' (OK) send_cmd(msg_len=2, type='V') send_cmd: sending 3a 56 a9 0d 00 00 00 00 '.V......' send_cmd: received 56 32 30 32 30 58 58 0d 'V2020XX.' (OK) Attached to Tripp Lite INTERNETX525 dstate_init: sock /var/run/nut/tripplite_usb-tripplite open on fd 6 send_to_all: SETINFO driver.version "2.4.1" send_to_all: SETINFO driver.version.internal "0.20" send_to_all: SETINFO driver.name "tripplite_usb" send_to_all: SETINFO driver.parameter.pollinterval "2" sen...

..._usb -a ups -DDD -u root Network UPS Tools - 'ATCL FOR UPS' USB driver 0.01 (2.7.1.5) Warning: This is an experimental driver. Some features may not function correctly. 0.000000 debug level is '3' 2.297779 read: (8 bytes) => 03 00 00 00 00 00 00 00 2.298029 dstate_init: sock /var/state/ups/nutdrv_atcl_usb-ups open on fd 5 3.345960 read: (8 bytes) => 03 00 00 00 00 00 00 00 4.394102 read: (8 bytes) => 03 00 00 00 00 00 00 00 6.306350 read: (8 bytes) => 03 00 00 00 00 00 00 00 8.306648 read: (8 bytes) => 03 00 00 00 00 00 00...

...(0 bytes) => > F => FAILED [short read] > F detail: (0 bytes) => > Cannot calculate charge percentage for this UPS. <-**************** > Done setting up the UPS. > Asking for UPS status [Q1]... > Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 00001001] > dstate_init: sock /var/run/nut/megatec_usb-SAI open on fd 5 > Asking for UPS status [Q1]... > Q1 => OK [(225.4 225.4 225.4 042 50.1 13.6 25.0 00001001] > Asking for UPS status [Q1]... > Q1 => OK [(225.4 225.4 225.0 042 50.1 13.6 25.0 00001001] > ... > > So I tried the svn versi...

...ut.voltage.nominal "230" 3.005339 send_to_all: ADDCMD test.battery.start 3.005427 send_to_all: ADDCMD shutdown.return 3.005550 send_to_all: ADDCMD shutdown.stayoff 3.005727 Num of bytes requested for reading from UPS: 16 6.008828 data receiving error (0 instead of 16 bytes) 6.009091 dstate_init: sock /var/state/ups/powercom-my open on fd 5 6.009195 send_to_all: SETINFO driver.version "2.4.1-1993" 6.009289 send_to_all: SETINFO driver.version.internal "0.12" 6.009384 send_to_all: SETINFO driver.name "powercom" 6.009477 send_to_all: SETINFO driver.parameter....

...230.0 013 096.0 50.0 Asking for UPS status ("Q1" command)... UPS status: (208.5 182.0 229.3 054 50.0 2.29 39.0 00000001 96.0V battery, interval [1.6V, 2.3V]. Done setting up the UPS. Asking for UPS status ("Q1" command)... UPS doesn't return any information about its status. dstate_init: sock /var/lib/nut/megatec-rossups open on fd 6 Asking for UPS status ("Q1" command)... UPS doesn't return any information about its status. Asking for UPS status ("Q1" command)... UPS doesn't return any information about its status. Signal 2: exiting I then decided th...

...ta: ups.firmware.aux poll_data: ups.contacts poll_data: ambient.humidity poll_data: ambient.humidity.alarm.maximum poll_data: ambient.humidity.alarm.minimum poll_data: ambient.temperature poll_data: ambient.temperature.alarm.maximum poll_data: ambient.temperature.alarm.minimum update_info_all: done dstate_init: sock /var/run/ups/apcsmart-ttyS0 open on fd 5 update_status update_info_normal: starting poll_data: ups.contacts poll_data: ambient.humidity poll_data: ambient.temperature update_info_normal: done Thanks, Stewart

On Dec 26, 2013, at 10:28 PM, Ariel Wainer wrote: > On 27/12/13 00:06, Charles Lepple wrote: >> Could you please send the debug output? (if it is more than ~ 30KB >> gzipped, just send it directly to me.) I was going to use the debug >> output from the earlier thread to generate those C files, but yeah, >> there are some additional bits needed. If nothing else, it would

...uration: could not set config 1: Device or resource busy > 0.029246 detached kernel driver from USB device... > 0.030559 USB device [0001:0000] opened > 0.866216 read: (8 bytes) => 03 00 00 00 00 00 00 00 > 0.866413 reply[0] = 0x03 -> OL > 0.867461 dstate_init: sock /var/state/ups/nutdrv_atcl_usb-ups open on fd 5 > 1.914346 read: (8 bytes) => 03 00 00 00 00 00 00 00 > 1.915850 reply[0] = 0x03 -> OL > 5.872047 status interrupt read: error submitting URB: Device or resource busy "Device or resource busy" usually...

...ind_nut_info: unknown info type: load.on.delay 0.355278 find_nut_info: unknown info type: load.off.delay 0.355305 upsdrv_initinfo... 0.355333 upsdrv_updateinfo... 0.607995 libusb_get_interrupt: Connection timed out 0.608075 Got 0 HID objects... 0.608109 Quick update... 0.608182 dstate_init: sock /var/run/nut/usbhid-ups-CENER_LA900_usb open on fd 5 0.608229 upsdrv_updateinfo... 0.859959 libusb_get_interrupt: Connection timed out 0.860036 Got 0 HID objects... 0.860064 Quick update... 2.610049 upsdrv_updateinfo... 2.862002 libusb_get_interrupt: Connection timed out Ke...

Sorry, I'll gzip/attach next time. I tried pollonly and made sure no processes were hanging out. While everything comes up and seems to run happy, I still get log messages every couple of seconds, and "upsc eaton" gives me one of two messages: Error: Driver not connected ups.status: WAIT Is this actually functional? Usually I don't consider NUT operational until upsc works

...Size: 8, Value: 0.000000 > Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.3.0-1150) > > Report descriptor retrieved (Reportlen = 78) > =46ound HID device > Detected a UPS: ?/UPS USB MON V1.4 > upsdrv_initinfo... > upsdrv_updateinfo... > Quick update... > dstate_init: sock /var/state/ups/usbhid-ups-sweex_PP100 open on fd 5 > upsdrv_updateinfo... > Quick update... > upsdrv_updateinfo... > Quick update... > Signal 2: exiting > upsdrv_cleanup... > > [This keeps repeating to infinity so I Ctrl+C] > > The Values stay the same no matte...

...Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 Looking up ff000001 Looking up 00000000 entering identify_ups(0x06da, 0x0003) upsdrv_updateinfo... dstate_init: sock /home/carlos/dev/nut/live/var/state/ups/ups open on fd 5 upsdrv_updateinfo... Waiting for notifications... Signal 2: exiting Closing device -- Carlos Rodrigues

...000 Report[buf]: (2 bytes) => 01 00 Path: ff000001.ff000002, Type: Output, ReportID: 0x00, Offset: 0, Size: 8, Value: 0.000000 Report descriptor retrieved (Reportlen = 27) Found HID device Detected a UPS: Cypress Semiconductor/USB to Serial upsdrv_initinfo... upsdrv_updateinfo... Quick update... dstate_init: sock /var/state/ups/usbhid-ups-belkin open on fd 5 upsdrv_updateinfo... Quick update... upsdrv_updateinfo... Quick update... upsdrv_updateinfo... Quick update... upsdrv_updateinfo... Quick update... upsdrv_updateinfo... Quick update... upsdrv_updateinfo... Quick update... upsdrv_updateinfo... Quic...

...ind_nut_info: unknown info type: load.on.delay 0.365377 find_nut_info: unknown info type: load.off.delay 0.365407 upsdrv_initinfo... 0.365433 upsdrv_updateinfo... 0.617132 libusb_get_interrupt: Connection timed out 0.617233 Got 0 HID objects... 0.617278 Quick update... 0.617346 dstate_init: sock /var/run/nut/usbhid-ups-CENER_LA900_usb open on fd 5 0.617464 upsdrv_updateinfo... 0.869136 libusb_get_interrupt: Connection timed out 0.869237 Got 0 HID objects... 0.869281 Quick update... 2.619284 upsdrv_updateinfo... 2.871142 libusb_get_interrupt: Connection timed out -...

On Dec 11, 2014, at 5:43 AM, janc at telefonica.net wrote: > 0.339329 Entering libusb_get_report > 0.342986 Report[get]: (2 bytes) => 01 00 > 0.343085 Path: 008c0001.008c0003, Type: Feature, ReportID: 0x01, Offset: 0, Size: 8, Value: 0 > 0.343120 Entering libusb_get_report > 0.346953 Report[get]: (2 bytes) => 02 00 > 0.346993 Path: 008c0001.008c0002,

..._info: unknown info type: load.on.delay 0.209365 find_nut_info: unknown info type: load.off.delay 0.209891 upsdrv_initinfo... 0.210091 upsdrv_updateinfo... 0.462138 libusb_get_interrupt: Connection timed out 0.463669 Got 0 HID objects... 0.464839 Quick update... 0.466362 dstate_init: sock /var/run/nut/usbhid-ups-dockmaster open on fd 5 0.467580 upsdrv_updateinfo... 0.720135 libusb_get_interrupt: Connection timed out 0.721710 Got 0 HID objects... 0.723106 Quick update... 2.469447 upsdrv_updateinfo... 2.722132 libusb_get_interrupt: Connection timed out...

...rter.Output.PresentStatus.Boost, Type: Input Can't find object 00860004.PowerConverter.Output.PresentStatus.Buck Path: 00860004.PowerConverter.Output.PresentStatus.Buck, Type: Input Path: 00860004.PowerConverter.Output.PresentStatus.00840039, Type: Feature, Value: 0.000000 upsdrv_updateinfo... dstate_init: sock /var/state/ups/newhidups-auto open on fd 5 upsdrv_updateinfo... Waiting for notifications... Signal 2: exiting Closing device