search for: dsp_options

...thod=standard dialplan=0 localdialplan=0 cpndialplan=0 early_bconnect=yes incoming_early_audio=no nodialtone=no presentation=-1 screen=-1 jitterbuffer=4000 jitterbuffer_upper_threshold=0 hdlc=no [isdn] ports=1 context=incoming msns=* misdn-init.conf: card=1,hfcpci te_ptmp=1 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 When I make a call the CLI tells that: *CLI> -- Executing Dial("SIP/101-081990e8", "mISDN/1/943833473|45|tTwW") in new stack Jun 19 12:32:25 WARNING[2153]: channel.c:2618 ast_request: No channel type registered for 'mISDN' Jun 19 12:...

...d:0 Debug:0 but I'm not sure how to check our settings are right with Etisalat, as above then goes to: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 /etc/misdn-init.conf: card=1,hfcpci te_ptmp=1 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 /etc/asterisk/misdn.conf: [general] debug = 0 method=standard bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=en musicclass=default senddtmf=yes far_alerting=no a...

...allowed [default] context=numeris language=fr nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 ;dialplan=0 use_callingpres=yes presentation=allowed senddtmf=yes [numeris] context=numeris-in ports=1,2,3,4 msns=* *** /etc/misdn-init.conf card=1,0x4 te_ptmp=1,2,3,4 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 -- Olivier Fauchon Freelance System-Network Admin Phone: +33 610 493 763 http://www.aixmarseille.com

...and the line is "BUSY". The phones on the NT line works fine, and SIP <-> mISDN (NT) calls has no problems. All comment lines has been removed to keep mail size reasonable. /etc/misdn-init.conf: card=1,0x4,dtmf te_ptmp=1,2 nt_ptmp=3,4 option=1,master_clock poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=1 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log bridging=yes stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=default language=en...

...E-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- mISDN_close: fid(3) isize(131072) inbuf(0x9eff060) irp(0x9eff060) iend(0x9eff060) [root@gateway ~]# [root@gateway ~]# cat /etc/misdn-init.conf card=1,0x4 te_ptmp=1,2 poll=127 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=5 [root@gateway ~]# cat /etc/asterisk/misdn.conf [general] debug = 0 method=standard bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=it musicclass=default senddtm...

...rdsipbx 2.6.15.7 #2 Tue Jun 5 16:37:07 CEST 2007 i686 i686 i386 GNU/Linux [root@rdsipbx ~]# dmesg |grep Digium HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S Digium Card' clock: normal [root@rdsipbx ~]# cat /etc/misdn-init.conf card=1,0x4 te_ptp=1,2,3,4 poll=128 dsp_options=0 debug=0xf [root@rdsipbx ~]# asterisk -V Asterisk 1.2.18 *CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PTP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 * Port 2 Type TE Prot. PTP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 * Port 3 Type TE Prot. PTP L2Link DOWN L1Link:DOW...

...roller [HFC-PCI] (rev 02) this is my sip general part (jb enable to get the jitter buffer working): jbenable = yes jbforce = yes jbmaxsize = 200 jbresyncthreshold = 1000 jbimpl = adaptive jblog = yes This is the relevant part of the misdn-init.conf card=1,hfcpci te_ptp=1,2 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 And this is the misdn.conf [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log ntkeepcalls=no bridging=no l1watcher_timeout=0 stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_ke...

...PCM busses with the > same ID > # are expected to be connected and have equal slots. > # Only one chip of the PCM bus must be master, the others slave. > # > # debug=<number> > # > # Enable debugging (see hfc_multi.h for debug options). > # > # dsp_options=<number> > # # set this to 2 and you'll have software bridging instead of > # hardware bridging. > # > # > # dtmftreshold=<milliseconds> > # > # Here you can tune the sensitivity of the dtmf tone recognizer. > # > poll=64 > #pcm=1,1 &g...

...on=allowed [default] context=numeris language=fr nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 ;dialplan=0 use_callingpres=yes presentation=allowed senddtmf=yes [numeris] context=numeris-in ports=1,2,3,4 msns=* * /etc/misdn-init.conf card=1,0x4 te_ptmp=1,2,3,4 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 obelix:/etc/as * SIP configuration [default] exten => 412,1,Dial(SIP/hard_sysadmins&SIP/ofauchon_soft,30) exten => 412,2,Voicemail(412) [numeris-in] exten => 0412,1,Goto(default,412,1) * Log of an incoming call (notice the activity on both ports)...