search for: dp83815

[Sorry if this is off-topic for this list, please advise me if there''s a better place to ask this] I have an embeded motherboard with 4 natsemi (DP8315) ethernet chips. I''m running a 2.6.9 kernel (I''ve tried 2.6.11 too) and a very minimal Slackware distribution. Now about the problem: The network interfaces seem to NOT transmit anything when the interface is

...d: pxelinux.cfg/default." Based on TFTP logs, it looks like MENU.C32 is hanging when it tries to read it's settings from DEFAULT. I'm pretty sure the initial read of DEFAULT is successful, because it knows to look at MENU.C32. Here are some additional details regarding the NIC: NSC dp83815 10/100 Mac Phyter 3v adapter Device ID: 0020 Vendor ID: 100B. I've tried version 3.31 as well as 3.40pre2. Thanks in advance for your help - if you have any questions please let me know. Thanks,

...want to run asterisk: - National Semicondudor Geode GX1 266MHz Geode 266MHz single chip - NS Cx5530a Southbridge National Semiconductors SC2200 - NS PC97317 in chipset - 32MB Compact Flash - 64MB Ram - 10/100Mbps, Autosense 10/100Mbps, Autosense Realtek 8139C National DP83815 / DP83816 Some tip? I have a ide>flash adaptor to make the install... I need recomendations in Linux distro... asterisk min. install ...etc..any info i can get. Thanks for any help Miklos Atenciosamente Cl?udio Miklos iPFONE Telefonia IP Rua Caio Graco 735 S?o Paulo SP ( BR - 55 1...

...ooks to be happening before pxelinux has any chance to participate, so it cannot be to blame. Im seeking corroboration here before I go badgering the bios-provider here's the relevant pxelinux.cfg/default, and what the bios puts out to serial SERIAL 0 19200 CONSOLE 0 DEFAULT menu.c32 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082) Copyright (C) 1997-2000 Intel Corporation CLIENT MAC ADDR: 00 00 24 C2 46 C8 CLIENT IP: 192.168.42.100 MASK: 255.255.255.0 DHC...

...y to boot an msdos system using pxelinux and memdisk on my PC engines Wrap-2.c card and I have problems with it This is what I see: PXELINUX 3.11 Debian-2006-03-16 Copyright (C) 1994-2005 H. Peter A boot: msdos Loading memdisk.... Loading images/msdos/msd622bd.dosim......................... Ready. dp83815: Setting full-duplex based on negotiated link capability. MEMDISK 3.11 Copyright 2001-2005 H. Peter Anvin e820: 0000000000000000 00000000000a0000 1 e820: 00000000000f0000 0000000000010000 2 e820: 00000000fff00000 0000000000100000 2 e820: 0000000000100000 0000000007f00000 1 Ramdisk at 0x07d61000,...

hi HPA, in case youre collecting such bugs, heres what (I think) I know. sorry for the excessive/pedantic detail.. this PXE code NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082) Copyright (C) 1997-2000 Intel Corporation has a tftp client that requests option tsize on file...

Guys, I've heard about some absurd RAM requirements for 9.1, has anybody tested it? e.g. http://forums.freebsd.org/showthread.php?t=36314 -- View this message in context: http://freebsd.1045724.n5.nabble.com/9-1-minimal-ram-requirements-tp5771583.html Sent from the freebsd-stable mailing list archive at Nabble.com.

Hello Everyone, I am having trouble with booting a soekris 4826 board.after setting up my tftp,dhcp and web servers ,I log into the board using minicom and type boot f0,which doesn't quite work out. > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082) Copyright (C) 1997-2000 Intel Corporation CLIENT MAC ADDR: 00 00 24 C8 C9 60 CLIENT IP: 192.168.200.3 MASK: 255.255.255.0 DHCP...

...bios that way. comBIOS ver. 1.28 20050529 Copyright (C) 2000-2005 Soekris Engineering. net4801 0128 Mbyte Memory CPU Geode 266 Mhz Pri Mas SanDisk SDCFB-512 LBA 993-16-63 500 Mbyte Seconds to automatic boot. Press Ctrl-P for entering Monitor. NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082) Copyright (C) 1997-2000 Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting MacPhyter PXE ROM. EXTLINUX...

...inux and memdisk on my PC > engines Wrap-2.c card and I have problems with it This is what I see: > PXELINUX 3.11 Debian-2006-03-16 Copyright (C) 1994-2005 H. Peter A > boot: msdos > Loading memdisk.... > Loading images/msdos/msd622bd.dosim......................... > Ready. > dp83815: Setting full-duplex based on negotiated link capability. > MEMDISK 3.11 Copyright 2001-2005 H. Peter Anvin > e820: 0000000000000000 00000000000a0000 1 > e820: 00000000000f0000 0000000000010000 2 > e820: 00000000fff00000 0000000000100000 2 > e820: 0000000000100000 0000000007f00000...

I have released SYSLINUX 3.08-pre5. Sparse files should now work correctly in extlinux. Symlink support still needs to be added, though. -hpa

...channel 1> on atapci0 ata1: [ITHREAD] pci0: <bridge> at device 17.0 (no driver attached) sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x8c00-0x8cff mem 0xd000a000-0xd000afff irq 11 at device 18.0 on pci0 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0 nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:0d:9d:43:2b:a7 sis0: [ITHREAD] acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on...

...; on pcib0 May 14 17:56:43 /kernel: pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0 May 14 17:56:43 /kernel: pci1: <PCI bus> on pcib1 May 14 17:56:43 /kernel: pci1: <S3 Trio3D/2X graphics accelerator> at 0.0 May 14 17:56:43 /kernel: sis0: <NatSemi DP83815 10/100BaseTX> port 0xd000-0xd0ff mem 0xed000000-0xed000fff irq 15 at device 9.0 on pci0 May 14 17:56:43 /kernel: sis0: Ethernet address: 00:a0:cc:a1:c3:71 May 14 17:56:43 /kernel: miibus0: <MII bus> on sis0 May 14 17:56:43 /kernel: ukphy0: <Generic IEEE 802.3u media interface> on...

Hi, Hopefully this won''t be too off-topic (I''ve seen both bonding & vlan mentioned on the list, but not really together). I''ve tried to get bonding (2 x 100Mb EEPro, but will want to try on 1000BaseT) and vlans to work together, but without luck. I can get them working fine (seemingly at least - I didn''t tried bursting on the bonded port) individually.

...ext/plain; charset=ISO-8859-1 > > Hello Everyone, > > I am having trouble with booting a soekris 4826 board.after setting up my > tftp,dhcp and web servers ,I log into the board using minicom and type boot > f0,which doesn't quite work out. > > > boot f0 > > NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 > Copyright (C) 2002, 2003 National Semiconductor Corporation > All rights reserved. > > Pre-boot eXecution Environment PXE-2.0 (build 082) > Copyright (C) 1997-2000 Intel Corporation > > > CLIENT MAC ADDR: 00 00 24 C8 C9 60 > CLIENT IP...