search for: dl380

greetings, for those of you in the know, may i have some assistance in helping to make better decisions in purchasing more used server toys to install CentOS on please? :-) in the Compaq Proliant Rackmount DL380 line, the one that looks like the older 1850R is called a G1 meaning Generation 1 right? and then the DL380 G2 is a redesign that is gray and just has 6 drive bays up front correct? besides processor speed, do most of you prefer the DL380 G1 over the DL380 G2 or vice versa? would you mind provid...

Hi to all out there using HP DL380 G4 servers, i found a way to get the Digium TE410P with older firmware running on a HP-Compaq DL380 G4 Server! Here's the step-by-step description: 1. download the latest BIOS (in my case it was 4.04 from date: 06/02/2005) for the HP-Compaq DL380 G4 using the "Systems ROMPaq Firmware Upg...

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with "noapic...

greetings i have a few dual P3 Compaq 1850R units and use compaq smartstart 5.5 on them before a CentOS 4 load i have acquired some dual P3 Compaq DL380 G1 i.e. Generation 1 units and am wondering which specific smartstart download i should be using for them from this URL below h18004.www1.hp.com/support/files/server/us/subscription/ssdownloads.asp would someone please share their experience on this so i dont have to waste time and bandwidth? th...

Was there any resolution on this I also have a TE410P in an box with an Intel E7501 chipset? -Vickers -------- Original Message -------- Subject: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4 server Date: Tue, 8 Feb 2005 11:13:24 +1030 From: Peter Childs <peter.childs@nec.com.au> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium....

...ello... Currently in the process of upgrading Samba v2.0.10 to Samba v3.0.x, while conducting some minimal testing, it turns-out that Samba v3.0.x is performing slower than Samba v2.0.10. Set-ups: A. Samba v3.0.x --> Same PC client is accessing the samba share running on Red Hat 4.5 (64bit, HP DL380) which in turn has an NFS mount coming from another SAN attached Red Hat 4.5 (64bit, HP DL380). B. Samba v2.0.x --> Same PC client is accessing the samba share running on Red Hat 4.5 (32bit, Dell T7400) which in turn has an NFS mount coming from another SAN attached Red Hat 4.5 (64bit, HP DL380...

I''ve got a client demanding the use of HP DL380 G5''s, for various historical reasons, for a server room. I''m going nuts trying to figure out if the available CPU''s for them support VT, so I can avoid building them a separate Windows box. Unfortunately, the local web proxy is overloaded, so actually browsing the J...

Hi, all: I can't make my HP DL380 G2 servers to boot off local disk by using "default local" line in my PXE boot menu. For fully automated server setups, I have configured all my DL380 servers to always do PXE boot. By manipulating the default boot option in boot menu, I can control a server whether to install a new OS v...

Hi All I will need to install CentOS 5.3 on HP DL380 R05 server with RAID-1 required. I am a newbie to CentOS / HP servers, need your help: - Does CentOS 5.3 work smoothly with HP DL380 server especially recognizing SAS disks and hardware RAID-1 features? From you experience, do you have to use HP Storage Drivers provided for RedHat Ente...

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so...

The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector available to attach to a card that needs more power than the PCI bus can provide, like the TDM400P when FXS modules are used. HP has confirmed that there is no part they sell to give you such a connector, and Digium says their business ed...

Good afternoon everyone, I''m trying to compile the xen 2.6.32.x pv_ops kernel on centos 5.5 with i386 quad core xeon system (HP DL380 G3). Having some issues during the kernel compile one of which related to intel agp so I just removed it from .config and didn''t come across it again. This error here has got me stumped though: drivers/built-in.o: In function `xen_acpi_processor_get_info'': /usr/local/src/linux-2...

I'm looking at ordering a server from HP. I checked around on Google and found in the Wiki that the ProLiant DL380 is supposed to be known to work with *. I'm going to get a price quote on the following setup: HP ProLiant DL380 G4 Server w/ the following options: Intel Xeon 3.20GHz/1MB 2GB REG PC2-3200 (2 X 1GB) HP ProLiant Battery Backed Write Cache Enabler for SA6i RAID 1 drive set HP 36.4GB Pluggable U...

Hi. I am trying to boot Xen 2.0.5 on an HP DL380 G3. It won''t. The box has an "HP Smart Array 5i" that when running normal Linux is handled by the CCISS driver. I suspect that this is what is not supported in the stock Xen kernel. Am I correct that I need to build a kernel from source ? According to http://lists.xensource.com/...

greetings pre centos install raid5 setup on a compaq dl380 is asking for stripe size. 16kb 32kb 64kb i am using one of the built in controllers and the machine has just a gig of ram and 4 18.2 gig 10,000 rpm drives machine will be an email server with simple web hosting as well. suggestions? thanks - rh -- Robert Hanson - Abba Communications Co...

Hello List, i downloaded centos6 x86_64. With DVD-iso1 i made a booteable usb-stick (universal usb installer 1.8.5.7). When i boot my HP ProLiant DL380 G4 from the stick, the CentOS boot screen comes up and and the message "Automatic boot in xx seconds..." appears. * When i do not hit any key, the seconds are counted to zero an then it starts again at 10 seconds - again and again. * When hitting return, a boot menu appears: 1) Boot 2)...

On Fri, 10 Mar 2006, Herta Van den Eynde wrote: > I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4. > Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the > BIOS. > As soon as the installation starts, i.e. even before you get to the point > where you can enter "boot" and whatever boot options you want to use, the > server switches to graphics...

Hi, We are running FC5 test1 on some HP DL380 G4 servers with the stock xen and xen kernels supplied in FC5 release. We have 2 servers, one has 6GB of RAM the other 4GB. Both machines crash (lock up) on boot, I would have hoped to see 4GB of RAM and functional Xen in either case. Last message I see is related to PCI devices, I can try t...

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different...

...he shares (see below), should it? (also unsure how this would cause the BSOD) * I've made a darn stupid hum-dinger of a rookie error (and really, what better way to expose your ignorance than to post to a list - right?) Follows some helpful(?) stats: ********************* $ smbclient -L //dl380 -U anders-l added interface ip=192.168.0.191 bcast=192.168.0.255 nmask=255.255.255.0 Password: Domain=[PN-TRADING] OS=[Unix] Server=[Samba 2.2.7a-security-rollup-fix] Sharename Type Comment --------- ---- ------- netlogon Disk Network Logon Se...