search for: directedbroadcast

...ot;1" # Phone Label (Text desired to be displayed in upper right corner) phone_label: "Garrett - " ; Has no effect on SIP messaging # Time Zone phone will reside in time_zone: PST sntp_server: "136.159.2.254" ; SNTP Server IP Address sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default) # Telnet Level (enable or disable the ability to telnet into this phone telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged # Phone prompt/password for telnet/console session phone_prompt: "123&quot...

Anyone try the new Cisco firmware for the 79xx sip phones? In my test it seems to work fine for a little and than soon the phone looses its time. At first the status shows clear, and then it appears to get confused about the ntp time source and the time goes away on it. No features, just bug fixes. Perhaps I have something wrong with my ntp settings, but the other firmwares work just fine. --

...; <55> canreinvite=no host=dynamic dtmfmode=rfc2833 qualify=200 mailbox=55 SIPDefault.cnf: image_version: P0S3-8-12-00 proxy1_address: 192.168.1.109 ; Can be dotted IP or FQDN proxy_register: 1 messages_uri: 80 phone_password: cisco ; Limited to 31 characters (Default - cisco) sntp_mode: directedbroadcast ;"unicast" sntp_server: 192.168.1.77 time_zone: GMT+01/00 ; assuming you're in GMT time_format_24hr: 1 ; to show the time in 24hour format date_format: D/M/Y ; format you would like the date in dial_template: dialplan SIP<MAC>.cnf: image_version: P0S3-8-12-00 line1_name: 55...

..."1" # Phone Label (Text desired to be displayed in upper right corner) phone_label: "Cisco - " ; Has no effect on SIP messaging # Time Zone phone will reside in time_zone: EST sntp_server: "136.159.2.254" ; SNTP Server IP Address sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default) # Telnet Level (enable or disable the ability to telnet into this phone telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged # Phone prompt/password for telnet/console session phone_prompt: "admin&q...

...e: dialplan # TFTP Phone Specific Configuration File Directory tftp_cfg_dir: "" ; Example: ./sip_phone/ # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "192.168.17.11" ; SNTP Server IP Address sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default) time_zone: YST ; Time Zone Phone is in dst_offset: 1 ; Offset from Phone's time when DST is in effect dst_start_month: April ; Month in which DST starts dst_start_day: "" ; Day of mon...

...s anybody see anything wrong with it or have any other ideas? # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "172.16.10.24" ; SNTP Server IP Address sntp_mode: anycast ; unicast, multicast, anycast, or directedbroadcast (default) time_zone: EST ; Time Zone Phone is in dst_offset: 1 ; Offset from Phone's time when DST is in effect dst_start_month: April ; Month in which DST starts dst_start_day: "" ; Day of month in which DST starts dst_start_d...

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

...e_expires: "180" ; Default 180 sec # Setting for Message speeddial to UOne box messages_uri: "8500" #********* Release 2 new config parameters ********** # TFTP Phone Specific Configuration File Directory tftp_cfg_dir: "./" # Time Server sntp_mode: "directedbroadcast" sntp_server: "17.254.0.49" time_zone: "CST" dst_offset: "1" dst_start_month: "April" dst_start_day: "" dst_start_day_of_week: "Sun" dst_start_week_of_month: "1" dst_start_time: "02" dst_stop_month: "Oct"...

...ic Configuration File Directory tftp_cfg_dir: "" ; Example: ./sip_phone/ # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "137.222.10.60" ; SNTP Server IP Address sntp_mode: anycast ; unicast, multicast, anycast, or directedbroadcast (default) time_zone: GMT ; Time Zone Phone is in dst_offset: 1 ; Offset from Phone's time when BST is in effect dst_start_month: April ; Month in which BST starts dst_start_day: "21" ; Day of month in which BST starts dst_start_day_of_week: Sun ; Day of week in which BST starts...

Thanks But how about the config files (SIP...) that needs to be inside the tftp server, where can I get a sample of that? That's where the images for the firmwares of the ip phones come from, on boot right? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun Sent: Wednesday, January 26, 2005 5:47