Displaying 10 results from an estimated 10 matches for "dinow".
Did you mean:
dino
2017 May 17
2
Fw: [Nut-upsdev] POWERCOM-UPS-USB : UPS Shutdown
...e test, you have little or no load, since despite
being in state OB
DISCHRG the battery.charge is still 100. It's best to perform such tests
with a dummy load
such as a table lamp and an old fashioned incandescent 100 watt bulb.
==> Yes. I got it and try to ascend load as below results
dinow-All-Series:~# upsc pcmups
Init SSL without certificate database
battery.charge: 32
battery.charge.low: 10
battery.charge.warning: 30
battery.date: 2010/12/20
battery.runtime: 256
battery.type: PbAc
device.mfr: POWERCOM Co.,LTD
device.model: HID UPS Battery
device.serial: 004-0D9F-000
device.type: u...
2017 May 16
2
Fw: [Nut-upsdev] POWERCOM-UPS-USB : UPS Shutdown
...> But ups do not disconnect its outlets power
-----------------------------------------------------------------------------------
BB. Could you show us the output of command "upsc pcmups"?
==> Yes. Below 2 mode were the outputs of command "upsc pcmups"
B1. Battery Mode
dinow-All-Series:/etc/nut$ upsc pcmups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 30
battery.date: 2010/12/20
battery.runtime: 784
battery.type: PbAc
device.mfr: POWERCOM Co.,LTD
device.model: HID UPS Battery
device.serial: 004-0D9F-000
device...
2017 May 17
1
Fw: [Nut-upsdev] POWERCOM-UPS-USB : UPS Shutdown
...e test, you have little or no load, since despite
being in state OB
DISCHRG the battery.charge is still 100. It's best to perform such tests
with a dummy load
such as a table lamp and an old fashioned incandescent 100 watt bulb.
==> Yes. I got it and try to ascend load as below results
dinow-All-Series:~# upsc pcmups
Init SSL without certificate database
battery.charge: 32
battery.charge.low: 10
battery.charge.warning: 30
battery.date: 2010/12/20
battery.runtime: 256
battery.type: PbAc
device.mfr: POWERCOM Co.,LTD
device.model: HID UPS Battery
device.serial: 004-0D9F-000
device.type: u...
2017 May 11
2
Good Day NUT
...power failure occurs(upsmon)
But don't know which configuration I ignore to setup for ups shutdown
==> BB. I want to check that with the command "upsdrvctl shutdown" and then ups should shutdown itself, right ??
Any your kind advices I would like to try
Thanks in advanced
Dinow Hsieh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170511/4f0c5d6e/attachment.html>
2017 May 15
1
Fw: [Nut-upsdev] POWERCOM-UPS-USB : UPS Shutdown
On Mon, 15 May 2017, Dinow Hsieh wrote:
> ==> I have tried this command "upsdrvctl shutdown" as below results (However the UPS still sustain the power)
>
> ??? Network UPS Tools - UPS driver controller 2.7.1
> ??? Network UPS Tools - Generic HID driver 0.38 (2.7.1)
> ??? USB communication driver...
2017 May 17
0
[Nut-upsdev] POWERCOM-UPS-USB : UPS Shutdown
On May 17, 2017, at 4:53 AM, Dinow Hsieh <dinow at upspowercom.com.tw> wrote:
>
> ==> I tried below set-command but it react fail
>
> dinow-All-Series:~# upsrw -s "ups.delay.shutdown"="30" -u pcmups pcmups at localhost
> Password:
> Unexpected response from upsd: ERR ACCESS-DENIED
>...
2017 May 16
0
Fw: [Nut-upsdev] POWERCOM-UPS-USB : UPS Shutdown
On Tue, 16 May 2017, Dinow Hsieh wrote:
> BB. Could you show us the output of command "upsc pcmups"?
>
> ==> Yes. Below 2 mode were the outputs of command "upsc pcmups"
>
> battery.charge: 100
> battery.charge.low: 10
> battery.charge.warning: 30
> battery.date: 2010/12/20
.....
2014 Sep 11
0
POWERCOM HID USB controller update
...CM_communication.rar
If you need any additional information or any kind of support, please contact us.
Best Regards,
Artem Khokhlov
[PCM_Logo]
-----Original Message-----
From: Morozov Alexey
Sent: Friday, July 25, 2014 3:30 PM
To: 'nut-upsdev'
Cc: 'Arjen de Korte'; 'Dinow'; 'Peter Jao'; Khokhlov Artem; Ermakov Konstantin
Subject: POWERCOM HID USB controller update
Dear Sirs,
First of all I would like to thank you for support PCM product in your project.
Kindly please be informed that POWERCOM launch new USB-controller with productID 0X04. Updated...
2014 Jul 25
3
POWERCOM HID USB controller update
Dear Sirs,
First of all I would like to thank you for support PCM product in your project.
Kindly please be informed that POWERCOM launch new USB-controller with productID 0X04. Updated USB-controller compatible with previous version which supported by your usbhid-ups driver. There is added some command and changed idProduct. Vendor ID stay the same 0X0d9f without changes.
Detailed information
2017 May 11
0
Good Day NUT
On Thu, 11 May 2017, Dinow Hsieh wrote:
> ==> AA.?I confront an issue that can't shutdown the ups ? ?With the nut,
> I can get the ups status(upsc) and shutdown the linux-ubuntu when power
> failure occurs(upsmon) ?But don't know which configuration?I ignore to
> setup for ups shutdown
Hi, Could y...