Dear Sirs, First of all I would like to thank you for support PCM product in your project. Kindly please be informed that POWERCOM launch new USB-controller with productID 0X04. Updated USB-controller compatible with previous version which supported by your usbhid-ups driver. There is added some command and changed idProduct. Vendor ID stay the same 0X0d9f without changes. Detailed information regarding new POWERCOM communication protocol you could download via link https://dl.dropboxusercontent.com/u/15111856/PCM_communication.rar If you need any additional information to keep compatibility with PCM product don't hesitate to contact us. Sincerely yours -- Alexey Morozov distribution manager -----Original Message----- From: Arjen de Korte [mailto:nut+devel at de-korte.org] Sent: Tuesday, January 19, 2010 11:17 PM To: Morozov Alexey Cc: nut-upsdev Subject: Re: [Nut-upsdev] PowerCOM - HID PDC status Citeren Morozov Alexey <morozov at pcm.ru>:> Thank you for adding sound management command. It very important thing > for end user. I'm not sure that CPU firmware of sample support this > command. Please let me know serial number of BNT-500AP which you have > on hand. We'll check and send updated USB controller chip or whole > board with new CPU version directly from factory.The present version does *not* support silencing the beeper (that's why I removed this in r2213). The USB controller is socketed in the UPS, so if you just send a new one, that would be enough. The following is the relevant info from 'lsusb -v': idVendor 0x0d9f Powercom Co., Ltd idProduct 0x00a6 bcdDevice 0.01 iManufacturer 3 POWERCOM Co.,LTD iProduct 1 UPS BNT--500AP FW7.A6 iSerial 2 0A6-0000-0001 Best regards, Arjen -- Please keep list traffic on the list
Dear Sirs, We appreciate your support and cooperation. Can you please kindly add our new USB-controller with productID 0X04 to NUT compatible list. Updated USB-controller compatible with previous version which is supported by your usbhid-ups driver. Detailed information regarding new POWERCOM communication protocol you could download via link https://dl.dropboxusercontent.com/u/15111856/PCM_communication.rar If you need any additional information or any kind of support, please contact us. Best Regards, Artem Khokhlov [PCM_Logo] -----Original Message----- From: Morozov Alexey Sent: Friday, July 25, 2014 3:30 PM To: 'nut-upsdev' Cc: 'Arjen de Korte'; 'Dinow'; 'Peter Jao'; Khokhlov Artem; Ermakov Konstantin Subject: POWERCOM HID USB controller update Dear Sirs, First of all I would like to thank you for support PCM product in your project. Kindly please be informed that POWERCOM launch new USB-controller with productID 0X04. Updated USB-controller compatible with previous version which supported by your usbhid-ups driver. There is added some command and changed idProduct. Vendor ID stay the same 0X0d9f without changes. Detailed information regarding new POWERCOM communication protocol you could download via link https://dl.dropboxusercontent.com/u/15111856/PCM_communication.rar If you need any additional information to keep compatibility with PCM product don't hesitate to contact us. Sincerely yours -- Alexey Morozov distribution manager -----Original Message----- From: Arjen de Korte [mailto:nut+devel at de-korte.org] Sent: Tuesday, January 19, 2010 11:17 PM To: Morozov Alexey Cc: nut-upsdev Subject: Re: [Nut-upsdev] PowerCOM - HID PDC status Citeren Morozov Alexey <morozov at pcm.ru<mailto:morozov at pcm.ru>>:> Thank you for adding sound management command. It very important thing> for end user. I'm not sure that CPU firmware of sample support this> command. Please let me know serial number of BNT-500AP which you have> on hand. We'll check and send updated USB controller chip or whole> board with new CPU version directly from factory.The present version does *not* support silencing the beeper (that's why I removed this in r2213). The USB controller is socketed in the UPS, so if you just send a new one, that would be enough. The following is the relevant info from 'lsusb -v': idVendor 0x0d9f Powercom Co., Ltd idProduct 0x00a6 bcdDevice 0.01 iManufacturer 3 POWERCOM Co.,LTD iProduct 1 UPS BNT--500AP FW7.A6 iSerial 2 0A6-0000-0001 Best regards, Arjen -- Please keep list traffic on the list -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20140911/35ffffac/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.gif Type: image/gif Size: 5204 bytes Desc: image001.gif URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20140911/35ffffac/attachment.gif>
On Sep 11, 2014, at 2:50 AM, Khokhlov Artem <khokhlov.a at pcm.ru> wrote:> Can you please kindly add our new USB-controller with productID 0X04 to NUT compatible list. Updated USB-controller compatible with previous version which is supported by your usbhid-ups driver.Confused. This commit was added in 2011: https://github.com/networkupstools/nut/commit/9e55e02ce7ffa60de96a0e012e2f123f437b323a Should the UPSes be listed differently? -- Charles Lepple clepple at gmail
Dear Sirs, We appreciate your support and cooperation. Can you please kindly add our new USB-controller with productID 0X04 to NUT compatible list. Updated USB-controller compatible with previous version which is supported by your usbhid-ups driver. Detailed information regarding new POWERCOM communication protocol you could download via link https://dl.dropboxusercontent.com/u/15111856/PCM_communication.rar If you need any additional information or any kind of support, please contact us. Best Regards, Artem Khokhlov [PCM_Logo] -----Original Message----- From: Morozov Alexey Sent: Friday, July 25, 2014 3:30 PM To: 'nut-upsdev' Cc: 'Arjen de Korte'; 'Dinow'; 'Peter Jao'; Khokhlov Artem; Ermakov Konstantin Subject: POWERCOM HID USB controller update Dear Sirs, First of all I would like to thank you for support PCM product in your project. Kindly please be informed that POWERCOM launch new USB-controller with productID 0X04. Updated USB-controller compatible with previous version which supported by your usbhid-ups driver. There is added some command and changed idProduct. Vendor ID stay the same 0X0d9f without changes. Detailed information regarding new POWERCOM communication protocol you could download via link https://dl.dropboxusercontent.com/u/15111856/PCM_communication.rar If you need any additional information to keep compatibility with PCM product don't hesitate to contact us. Sincerely yours -- Alexey Morozov distribution manager -----Original Message----- From: Arjen de Korte [mailto:nut+devel at de-korte.org] Sent: Tuesday, January 19, 2010 11:17 PM To: Morozov Alexey Cc: nut-upsdev Subject: Re: [Nut-upsdev] PowerCOM - HID PDC status Citeren Morozov Alexey <morozov at pcm.ru<mailto:morozov at pcm.ru>>:> Thank you for adding sound management command. It very important thing> for end user. I'm not sure that CPU firmware of sample support this> command. Please let me know serial number of BNT-500AP which you have> on hand. We'll check and send updated USB controller chip or whole> board with new CPU version directly from factory.The present version does *not* support silencing the beeper (that's why I removed this in r2213). The USB controller is socketed in the UPS, so if you just send a new one, that would be enough. The following is the relevant info from 'lsusb -v': idVendor 0x0d9f Powercom Co., Ltd idProduct 0x00a6 bcdDevice 0.01 iManufacturer 3 POWERCOM Co.,LTD iProduct 1 UPS BNT--500AP FW7.A6 iSerial 2 0A6-0000-0001 Best regards, Arjen -- Please keep list traffic on the list -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20140915/18b70c41/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.gif Type: image/gif Size: 5204 bytes Desc: image001.gif URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20140915/18b70c41/attachment.gif>