search for: dial_templ

..._password: cisco ; Limited to 31 characters (Default - cisco) sntp_mode: directedbroadcast ;"unicast" sntp_server: 192.168.1.77 time_zone: GMT+01/00 ; assuming you're in GMT time_format_24hr: 1 ; to show the time in 24hour format date_format: D/M/Y ; format you would like the date in dial_template: dialplan SIP<MAC>.cnf: image_version: P0S3-8-12-00 line1_name: 55 line1_authname: 55 line1_shortname: 55 ; displayed on the phones softkey line1_password: 12345655 line1_displayname: "Lukasz Cisco7960"; the caller id proxy1_port: 5060 proxy1_address: 192.168.1.109 # Phone Lab...

...sername/auth name mismatch What's the right way to do this. Shown below are my configuration files: </edg> -----SIPDefault and SIPMacAddr ----- image_version: P0S3-07-4-00 tftp_cfg_dir: "" ; Example: ./sip_phone/ proxy_register: 1 timer_register_expires: 3600 dial_template: dialplan messages_uri: 3688 telnet_level: 2 phone_label: "Nat One" line1_name: 3115552368 line1_shortname: 3115552368 line1_authname: 3115552368 line1_password: 3115552368 line1_displayname: "Nat One" logo_url: "http://192.168.1.45/pts.bmp" nat_address: 64.169.xx.x...

...Cisco 7960: SIPDefault.cnf image_version: P0S3-08-9-00 proxy1_address: neocipher.net ; Can be dotted IP or FQDN proxy_register: 1 messages_uri: "100" phone_password: "cisco" ; Limited to 31 characters (Default - cisco) sntp_server: 10.10.10.1 time_zone: EST dial_template: DIALPLAN nat_enable: 1 nat_address: 172.16.2.1 nat_received_processing: 1 outbound_proxy_port: 5060 outbond_proxy: ns1.neocipher.net SIP0112B9EAFF72.cnf image_version: P0S3-08-9-00 # Line 1 Setup line1_name: 101 line1_authname: 101 line1_shortname: "Line 101" line1_password: "...

...user control, 3-enabled with no user control) call_waiting: "1" ; Default 1 (Call Waiting enabled) # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) dtmf_avt_payload: "101" ; Default 100 # XML file that specifies the dialplan desired dial_template: "dialplan" # Network Media Type (auto, full100, full10, half100, half10) network_media_type: "auto" #Autocompletion During Dial (0-off, 1-on [default]) autocomplete: "1" #Time Format (0-12hr, 1-24hr [default]) time_format_24hr: "0" # URL for exter...

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

I've dug through the documentation, and I must have just glanced over this, but how do I set this system up so it executes the call when 4 digits have been entered. Currently it seems to be operating on a timeout system. Cisco 7940's Right now if I press the digits 6000 the phone waits like 8 seconds before going forward. (If I press dial it is immediate). Anybody? -C

...user control, 3-enabled with no user control) call_waiting: "1" ; Default 1 (Call Waiting enabled) # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) dtmf_avt_payload: "101" ; Default 100 # XML file that specifies the dialplan desired dial_template: "dialplan" # Network Media Type (auto, full100, full10, half100, half10) network_media_type: "auto" #Autocompletion During Dial (0-off, 1-on [default]) autocomplete: "1" #Time Format (0-12hr, 1-24hr [default]) time_format_24hr: "1" ####### New Paramet...

...4-3db up, 5-6dB up) dtmf_db_level: 3 # SIP Timers timer_t1: 500 ; Default 500 msec timer_t2: 4000 ; Default 4 sec sip_retx: 10 ; Default 10 sip_invite_retx: 6 ; Default 6 timer_invite_expires: 180 ; Default 180 sec # Dialplan template (.xml format file relative to the TFTP root directory) dial_template: dialplan # TFTP Phone Specific Configuration File Directory tftp_cfg_dir: "" ; Example: ./sip_phone/ # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "137.222.10.60" ; SNTP Server IP Address sntp_mode: anycast...

...sec timer_t2: 4000 ; Default 4 sec sip_retx: 10 ; Default 10 sip_invite_retx: 6 ; Default 6 timer_invite_expires: 180 ; Default 180 sec ####### New Parameters added in Release 2.0 ####### # Dialplan template (.xml format file relative to the TFTP root directory) dial_template: dialplan # TFTP Phone Specific Configuration File Directory tftp_cfg_dir: "" ; Example: ./sip_phone/ # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "192.168.17.11" ; SNTP Server IP Address sntp_mode...

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

Thanks But how about the config files (SIP...) that needs to be inside the tftp server, where can I get a sample of that? That's where the images for the firmwares of the ip phones come from, on boot right? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun Sent: Wednesday, January 26, 2005 5:47