search for: desappear

Local branch site, not so well built (mostly non-managed switches). By some weeks, suddenly, the network suffer some strange trouble: the most suffering is samba (samba3 in NT mode, so SMB1): shares desappear, if users try to logon when network is in trouble, they get errors like 'no domain controller available'. Other traffic (eg, an internal HTTP) get slooooowww... The network trouble happens randomly, and seems to hit only a piece of the network, not all. Clearly, not always the same piece....

...MP eth0 In this situation it works fine. Host A replies to the ARP Request from host C for host IP_B, allowing host C and B to exchange IP packets. ___PROBLEM___ The problems is that, sometimes, the second line (the one with the P Flag in the "arp -n" output) desappears for some time and then appears again... !!? Note. Do you know if it is normal or if it could be a bug in "arp"? I didn''t verify if, when the second line is not present, the host A continues to answer to ARP Request for 192.168.30.130 on eth0. In other words I didn''t...

Hi, Can somebody in the list tell me why sometimes when I do the TOP command I see more than one asterisk process ? Sometimes it appears and desappears again... Thanks, Ard.

...ich already has netbios name "drone" associated with it. Without "netbios aliases=probe" nmblookup command can't find any information about netbios name "probe". I tried to make the following permanent mapping: netbios name <--> IP in wins.dat file but it desappears after a few seconds. Does anyone has any idea how I or samba could announce it's Netbios name which is on the second LAN card ? 10x in advance Best regards __________________________________ Nikolay Kabaivanov, ntk@ru.acad.bg University of Rousse, Bulgaria

...Authentication using standard ubuntu samba package (4.15.13+dfsg-0ubuntu1.1). I've enabled workaround 'lock directory = /var/cache/samba'. Still does not work, and behave very badly with no conectivity or bad connectivity (wireless): sometime the 'reboot/poweroff' menu option desappear, open a terminal took minutes... Seems to me an NSS trouble; my NSS conf is simple: root at dane:~# cat /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed,...

> Manpage says that 'usershare max shares' is just at '0' as default, but > i'll give it a try and report back. OK, seems to work, log error desappeared. I can fire up bug for the manpage?! -- dott. Marco Gaiarin GNUPG Key ID: 240A3D66 Associazione ``La Nostra Famiglia'' http://www.lanostrafamiglia.it/ Polo FVG - Via della Bontà, 7 - 33078 - San Vito al Tagliamento (PN) marco.gaiarin(at)lanostrafamigl...

...hat. Sorry. > if you run 'samba_dnsupdate --help' and amongst the output is > '--use-samba-tool', you can add 'dns update command > = /usr/local/samba/sbin/samba_dnsupdate --use-samba-tool' to smb.conf > on the DC, this should fix this problem. Ok. Done. Error desappear. But why on the first DC it is not meeded?! It is because there's some sort of ''master'' DNS, and so the first DC use by default RPC to the local ''master''? I'm curious... ;-) > Good question Thanks. -- dott. Marco Gaiarin GNUPG Key ID:...

...D bind9 server, or having the converse (bind9 AD server reply to client request, and forward to other bind9 server the non-domain query) was the same. Knowing a bit the DNS protocol, the latter or the former seems to me the same... Anyway, we are trying to re-image some of these box, and problem desappear. Boh. -- dott. Marco Gaiarin GNUPG Key ID: 240A3D66 Associazione ``La Nostra Famiglia'' http://www.lanostrafamiglia.it/ Polo FVG - Via della Bontà, 7 - 33078 - San Vito al Tagliamento (PN) marco.gaiarin(at)lanostrafamiglia.it t +39-0434-842711 f +39-0...

...e a week) in the share a 'disk folder' (a directory) with the same name of the 'file' of the email folder get created. Because (AFAI've understood) windows does not support files and directory with the same name in a dir, windows see only the directory. The result: the mailbox desappear from thunderbird (or, worster, it is still here but is empty). Solution: close thunderbird, delete (from windows explorer) the file folder (directory) that is empty, the mailbox folder (the file) reappear, start thunderbird, all OK. It is a bt annoying... and it is not clear if this is a Thunder...

...s' as final delivery rules (eg, user that exist in NSS are delivered). After some minutes i've reconnected and powered up the new switch, and all come back as usual. So seems that disconnecting temporarly the DM from the DCs, lead to 'user not found' error, like as users ''desappear'' from NSS. In winbind logs nothing get printed. Why?! -- dott. Marco Gaiarin GNUPG Key ID: 240A3D66 Associazione ``La Nostra Famiglia'' http://www.lanostrafamiglia.it/ Polo FVG - Via della Bontà, 7 - 33078 - San Vito al Tagliamento (PN) marco.g...

...local branch of my office two servers, say radagast (10.27.1.2) and olorin (10.27.1.3). They share the same UPS and the same place, sitting at roughly 20 centimeters each other. Network devices are in another room, not UPSes, and so if there''s a power loss, radagast compain about that UPS desappear. Also this two servers share a samba domain, and the syncronize each other (LDAP, some folders, some other nfs-mounted, ...). So i''ve thinked to simply put a gigabit ethernet on each of the two server and link them together with a simple switched cable. Note that: i''m not intere...

Hi all, I've tried search this problem on the list... no luck... The case is: without externip/localnet config on sip.conf [general] my SIP trunk works, but with no audio NAT problem (asterisk sends the private 192 address to the outside...) when I configure externip/localnet correctly my SIP trunk simply disappear! Checking the signalling with tcpdump shows me that Im sending the

...i add some user and i do 'Apply' and then 'OK', if i came back to the group, UNIX attributes membership are empty. d) if, for a user, i set a primary group in 'Member of' (NOT UNIX attributes), user object get a 'primaryGroupID' data with the RID of the group, and DESAPPEAR the relative data 'member' in the group. Argh! So, seems to me that: 1) probably for my fault, some of the UNIX data (eg, group membership) does not work. I think also can be irrilevant, because winbind/sssd get unix membership by other way (eg, ''windows'' mempership an...

...39;keep'' the mapping from the OU, and so ''hide'' the CSC, at least for the ''overlapping'' drive. Eg, if i enable 'offline files and folder' for a folder in M:, if i move to Pasian another 'M:' get mounted, and that offline folder ''desappear'', until i go back to sanvito. What i'm doing wrong?! Thanks... PS: or, more generic/general question... there's some way to have CSC be indipendent of the drive mapping? -- dott. Marco Gaiarin GNUPG Key ID: 240A3D66 Associazione ``La Nostra Famiglia''...

On Fri, May 25, 2018 at 07:01:53PM +0200, Denis Cardon via samba wrote: > Hi Emmanuel, > > > > > I have the exact same problem as this: > > > > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=772154 > > > > But the Samba version is different and much newer (Debian > > Wheezy 2:4.1.17+dfsg-1~bpo70+1). B > > > > asically many errors

...user that > exist in NSS are delivered). > After some minutes i've reconnected and powered up the new switch, and > all come back as usual. > > > So seems that disconnecting temporarly the DM from the DCs, lead to > 'user not found' error, like as users ''desappear'' from NSS. > In winbind logs nothing get printed. > > > Why?! Your Exim is not complaining about users, but is complaining about a non deliverable message, due to not reaching the destination ip adres. ( Unrouteable address ) As far i can tell winbind/nss resolved the user...

...21:19 H=(fouc.pp.lnf.it) [10.27.1.254] X=TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128 CV=no F=<service at external-service.com> rejected RCPT <local_user at fvg.lnf.it>: Unrouteable address (again 'Unrouteable address' is by design in my exim configuration, effectively seems as user desappear from NSS) 'local user' exist, in fact one minute later: 2019-03-26 18:22:08 1h8pm0-00027Q-No => local_user <local_user at fvg.lnf.it> F=<logcheck at fvg.lnf.it> P=<logcheck at fvg.lnf.it> R=procmail T=procmail_pipe Seems to me as samba/winbind behave like as, if i s...

...9;disk folder' (a > directory) with the same name of the 'file' of the email folder get created. > Because (AFAI've understood) windows does not support files and > directory with the same name in a dir, windows see only the directory. > > > The result: the mailbox desappear from thunderbird (or, worster, it is > still here but is empty). > > Solution: close thunderbird, delete (from windows explorer) the file > folder (directory) that is empty, the mailbox folder (the file) reappear, > start thunderbird, all OK. > > > It is a bt annoying... and...

On 29/05/2023 13:43, Marco Gaiarin via samba wrote: > Mandi! Rowland Penny via samba > In chel di` si favelave... > >> The latest version of this wiki page works for myself: >> https://wiki.samba.org/index.php/PAM_Offline_Authentication > > Mee too, but does not work. ;( Don't really understand that, it sounds like it does and it doesn't work for you.

...y I saw on the net were very slow motion usually. These high-motion videos were especially hard for Theora and it quickly introduced unacceptable artifacts. Now the encoder reacts better, and much better in two-pass. Just used ffmpef2theora nightly. Blockiness even at quite low bitrates almost desappears or gets to an acceptable level. Even tried a 720p50 HD video (I thought Theora would be very bad at that) and the result was quite good at around 9 Mb/s. Now a couple possible problems: 1) One-pass can still improve I think, with a better and quicker adaptation to higher motion or detail part...