search for: debouncing

I get the following message on a Centos 5 system (really a Trixbox 2.4 build on Centos 5): Jan 14 00:12:28 sip2 kernel: hub 1-0:1.0: connect-debounce failed, port 1 disabled What does this mean? This message occurs about 30 times/sec for about 45 sec. Then my Bluetooth token starts up. Jan 14 00:12:28 sip2 kernel: hub 1-0:1.0: connect-debounce failed, port 1 disabled Jan 14 00:13:00 sip2

Does anyone know the default E&M Wink timings for Nortel DID ports? The default settings on Asterisk are: ; prewink: Pre-wink time (default 50ms) ; preflash: Pre-flash time (default 50ms) ; wink: Wink time (default 150ms) ; flash: Flash time (default 750ms) ; start: Start time (default 1500ms) ; rxwink: Receiver wink time (default 300ms) ;

# export USB_DEBUG=5 # /usr/local/ups/bin/usbhid-ups -a CP550SLG -DDDDD Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 0.000000 debug level is '5' 0.000426 upsdrv_initups... usb_set_debug: Setting debugging level to 5 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001 usb_os_find_busses: Found 002

...disconnected the lines, the spans started to work correctly. The error persists a system reboot. Asterisk also does not indicate what the trouble is. When I enabled debug for wct4xxp, the following messages started to show: Jul 6 11:15:03 server kernel: wct4xxp: LOF/LFA detected on span 2 but debouncing for 2500 ms Jul 6 11:15:03 server kernel: wct4xxp: LOF/LFA detected on span 4 but debouncing for 2500 ms Jul 6 11:15:03 server kernel: wct4xxp: LOF/LFA detected on span 3 but debouncing for 2500 ms Jul 6 11:15:03 server kernel: wct4xxp: LOF/LFA detected on span 2 but debouncing for 2500 ms Ju...

I'm having problems with unclean hangups (being read as a flash instead of a hangup?). Can I turn off hook flash recognition in asterisk, but still have the flash button on the analog phone operational? Could I use these settings in zapata.conf to fix my problem? *prewink*: Sets the pre-wink timing. *preflash*: Sets the pre-flash timing. *wink*: Sets the wink timing. *rxwink*: Sets the

...vestigate the zaptel libs. Mark chimes in about how could this be possible yada yada. After investigation I find the debounce set to 500ms, but basically ignored and treated as an on/off value - implementation of which still seems pretty strange, but I am convinced it is not doing much, if any, debouncing of the RBS on the t1. I decide to give up on that since it looks like I would have to redo a large part of the driver to build in the hysterisis I need into the signalling bits. Why this problem is so vexing is I have one line that rings through to a phone, and then transfers to vm, since the...

I have two Adtran 750's connecting our analog phones to asterisk. On occasion, I get a channel that gets "stuck" off hook. 'show channels' shows: Zap/27-1 (longdistance s 1 ) Rsrvd (None) (None) And will just stay like that until the phone is manually picked up and hung up again (or asterisk is stopped/started). I guess this is a function of an unclean hangup (being

Hello there, I tried to found documentation about openloop disconnect on Asterisk/Zaptel. And up to now, I didn't find anything. Is openloop disconnect supported by zaptel/wcfxo drivers? Other question: maxsilence and silencethreshold don't seem to have any effect on voicemail. Could it be possible that in certain situation it just wont work? I tried adding some verbose in

I have a situation where I am receiving DID calls using Immediate Start Pulse signalling on a Loop Start trunk. The line terminates on a Newbridge Mainstreet 3624 channel bank, which provides battery etc. The channel is converted and routed to Asterisk. The lines are configured as follows: /etc/asterisk/zapata.conf ; Channels 1-24 service MainStreet 3624 channel bank context=infrom-did group=1

...e 'pedanticpci' module parameter. wct4xxp: Remove some debug information from the kernel logs. wct4xxp: Slow down the rate we poll the framers in alarm. wct4xxp: Move "hardware DTMF disabled" message from dev_notice -> dev_info wctdm24xxp: Remove DEBOUNCING_RINGING_OFF from ring_detector_state enum. wctdm24xxp: Setup all VPMADT032 channels on hybrid cards. dahdi: Add functions for determining spantype (E1/T1) to include/dahdi/kernel.h dahdi: Define pr_xxx macros if not already defined. wcte12xp: Set uncollected performa...

...e 'pedanticpci' module parameter. wct4xxp: Remove some debug information from the kernel logs. wct4xxp: Slow down the rate we poll the framers in alarm. wct4xxp: Move "hardware DTMF disabled" message from dev_notice -> dev_info wctdm24xxp: Remove DEBOUNCING_RINGING_OFF from ring_detector_state enum. wctdm24xxp: Setup all VPMADT032 channels on hybrid cards. dahdi: Add functions for determining spantype (E1/T1) to include/dahdi/kernel.h dahdi: Define pr_xxx macros if not already defined. wcte12xp: Set uncollected performa...

Hello all- So I have * up and running and connected to a legacy system via em_w lines and have no trouble dialing from * through the tie line but from the PBX across the tie line I am having intermittant receipt of the DTMF. T-Berd testing is showing that the digits are coming across but * is either missing the first digit consistantly. This seems to me to have something to do with start timers

On Jan 12, 2020, at 12:58 PM, Gene Heskett wrote: > > But this doesn't pass the smell test, 3 other machines that are trained > to reboot when power returns and have no ups fitted, were NOT rebooted > as evidenced by their reported uptimes, one of which shows a 144 day > uptime. So why should this have been logged via a -wall bc to every > login it is servicing? >

Greetings, According to the FAQ "When you load the module and have no circuit/channel bank the LED's should flash red" I get the "knight rider" lights before the module loads, but after the modules are loaded I don't get any lights, other equipment plugged in or not. The card has been on my shelf a while so I wonder if it needs a firmware upgrade ? Can the cards

Hello, I'm a little confused on DTMF. A sip peer is registered on two Asterisk servers. No dtmfmode is set for them, the sip peer is 999 on Asterisk 1 and 999 on Asterisk 2. They both register on each other. A call comes in on Asterisk server 1, provider 1, dtmf=inband. Then the call is transferred to Asterisk 2: RetryDial(/var/lib/asterisk/sounds/connecting,15,10,SIP/12351 at

Hi, I've been experiencing trouble with my DAHDI channels for some time and have finally decided to try and resolve the issue. Essentially, the problem I am having is that when a call comes in, and my DAHDI phones therefore ring, Asterisk thinks that one of the handsets has picked up to answer the incoming call - whereas in actual fact it is still on hook. The call then gets instantly

Something new to me. Recently installed a 1.4.30 box for a small office with four POTS lines in a hunt (Digium TDM410P). Had the telco put a "call forward" option on the main line of the hunt. They dial a feature code from their desk phones (Polycom IP450) that results in forwarding the main number to our VoIP service. This is all to let them "try out" our dialtone

We have integrated an Asterisk (TE110P) and a Mitel SX200. We usually get over 500 frame errors and over a 500 slip errors per hour. When the errors reach 1000 per hour the Mitel will take it's T1 card offline. At that point no calls can be routed from the Asterisk server to the Mitel and the TE110P reports a Yellow alarm. What can be causing all these Frame and Slip errors? We have been

0 listeners is fine. Just no sense in pulling of a feed when no one is listening. ----- Original Message ----- From: "Karl Heyes" <karl@xiph.org> To: <Jason@Weatherserver.net> Cc: "icecast" <> Sent: Friday, May 13, 2005 7:09 AM Subject: Re: [Icecast] On-Demand Relay > On Fri, 2005-05-13 at 05:56, Jason wrote: >> Is on-demand relay currently

...ases contain bug fixes and modifications to accommodate interface changes in Linux kernels up to 2.6.32. A few of the more noteworthy changes in these releases from the previous release are: * Reference counts are properly maintained on the echo canceller modules (issue #13504). * Better alarm debouncing for wct4xxp and wcte12xp drivers per AT&T 54016. * Support for extra HFC-4S and HFC-8S BRI cards in wcb4xxp. * dahdi_dummy will not lock up when a time-shift is detected (issue #15647). * T1 CAS support in the xpp "PRI" (E1/T1) module. * T1 CAS configuration generation support...