search for: dddddddddd

...1) It does not affect calls to internal office extensions (which still go through asterisk) OR voicemail 2) The other 20+ phones in the same office on the same network have 0 problems. Here's a SIP trace of the problem. yyy.yyy.yyy.yyy is the outside NAT IP xxx.xxx.xxx.xxx is the IP of my PBX dddddddddd is the dialed phone number sssssssssss is the source phone number The peculiar thing is that asterisk sends an OK in response to an INVITE, then the phone sends back an ACK, which asterisk seems to ignore because it retransmits the OK message again Then eventually the phone gives up and sends a BY...

...n with my ups a MGE NOVA 1100 AVR. I do it first with manual configuration but after no success, i prefered to install mgeups-psp package to do it directly. But since when i execute psp, the attempt finish with an "No communication with UPS" error. Same is when i type: mge-shut -u root -DDDDDDDDDD /dev/ttyS0 . I unplog and replog and after reboot my system for some times. I tried also to do a configuration of my serial port but without success. My setserial command output is: dev/ttyS0 uart 16550A port 0x03f8 irq 4 baud_base 115200 spd_normal skip_test auto_irq I'm use serial port...

I've been running tincd on several machines without a problem. I'm now setting up a new intel-type dual-processor machine, with a custom compiled 2.4.9 linux kernel. When I start the daemon: tincd -n vpn -dddddddddd I get the following debug information in in /var/log/messages Aug 27 17:26:49 q tinc.vpn[971]: Process 972 (tinc-up) exited with non-zero status 255 Aug 27 17:26:49 q tinc.vpn[971]: Ready: listening on port 30001 Aug 27 17:26:49 q tinc.vpn[971]: Trying to connect to 55.55.55.55 Aug 27 17:26:49...

Hi, I'm using macports to install nut on a MAC OS X (10.7) I get the following error messages when I try running: sudo blazer_usb -a zigor -DDDDDDDDDD 0.944590 Checking device (0001/0000) (250/005) 2.785449 - VendorID: 0001 2.785465 - ProductID: 0000 2.785468 - Manufacturer: unknown 2.785472 - Product: STD UPS MON V1.0 2.785475 - Serial Number: unknown 2.785478 - Bus: 250 2.785481 Trying to match d...

I'm stuck behind a corporate NAT that I obviously have absolutely no control over. The nice thing is that the firewall rules, AFAIK, are very nice. I've had tinc running before from behind nazi firewalls with no NAT. Been fiddling with tinc for many hours, but have been SOL. The local machine is the client (has ConnectTo in the conf), and remote is the server (has Listen in the conf).

...ing to understand why this is happening so any help will be appreciated! Thanks, Aisling. # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" alias=84.203.148.14 # -----...

...ER+example+NAThelper ----------------------------------------------------------- # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_f...

...fBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{11,0x42},{8,0},{8,0}} shutdownArguments = {{1,30},y} modelname = BNT2000APT serialnumber = 2233445566 desc = Computer Room Small UPS I running /lib/nut/powercom -a APC1 -DDDDDDDDDD (Okay so the debugs are overboard!!!) Result is this! Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.6.0) 0.000000 debug level is '10' 0.002058 Flow control disable 0.002408 Num of bytes requested for reading from UPS: 16 0.147226 Num of bytes receive...

...fBytesFromUPS = 16 methodOfFlowControl = no_flow_control validationSequence = {{11,0x42},{8,0},{8,0}} shutdownArguments = {{1,30},y} modelname = BNT2000APT serialnumber = 2233445566 desc = Computer Room Small UPS I running /lib/nut/powercom -a APC1 -DDDDDDDDDD (Okay so the debugs are overboard!!!) Result is this! Network UPS Tools - PowerCom protocol UPS driver 0.12 (2.6.0) 0.000000 debug level is '10' 0.002058 Flow control disable 0.002408 Num of bytes requested for reading from UPS: 16 0.147226 Num of bytes receive...

...ll allow=g729 allow=ilbc nat=no canreinvite=no host=192.168.0.146 ser.cfg: ====== # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* # Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ listen=192.168.0.146 sip_warning=no alias="domain" alias="sip.domain.com" alias="domain.com" advertised_address=192.168.0.146 r...

....html > > Okay! I got the patched tarball, unpacked it, ran configure and make then > make > install. No probs! > > I tested the update driver and the result was still a validation error! > This is the console debug output! > > gatekeeper nut # /lib/nut/powercom -a APC1 -DDDDDDDDDDNetwork UPS Tools - > PowerCom protocol UPS driver 0.13 (2.6.0-r2984) > 0.000000 debug level is '10' > 0.002388 Flow control disable > 0.002561 Num of bytes requested for reading from UPS: 16 > 0.148057 Num of bytes received from UPS: 16 > Raw data...