search for: daa

...$Id: ixj.c,v 1.103 2003/10/23 00:29:48 dereksmithies Exp $ $Id: ixj.h,v 1.18 2003/09/18 09:52:15 dereksmithies Exp $ $Id: ixjuser.h,v 1.14 2003/08/31 22:26:43 dereksmithies Exp $ $Id: ixj_data.h,v 1.18 2003/09/18 09:52:15 dereksmithies Exp $ Driver version 3.1.0 sizeof IXJ struct 24036 bytes sizeof DAA struct 642 bytes Using old telephony API Debugging flags: Card Num 0 DSP Base Address 0x0300 XILINX Base Address 0x0318/0x00 DSP Type 8021 DSP Version 01.15 Serial Number 331a004c Card Type = Internet Linejack Country = US (1) Readers 0 Writers 0 Capabilities 15 DSP Processor load 212 Play Codec...

I'm trying to use a shareware program called PowerISO to extract a .daa cd image to a raw iso9660 format so that I can view the contents. PowerISO runs like this: ________________ [nate@blackbox ~/.wine/drive_c/Program Files/PowerISO]$ sudo wine cdburn.exe Password: Usage: cdburn <drive> -erase [image [options]] cdburn <drive> image [opt...

...ally modprobe wcfxo. At this point, I get the message: ZT_CHANCONFIG failed on channel 1: No such device or address (6) FATAL: Error running install command for wcfxo dmesg gives me: Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.2.5 Echo Canceller: MG2 Failed to initailize DAA, giving up... wcfxo: probe of 0000:00:0e.0 failed with error -5 syslog tells me: May 25 21:28:20 asterisk kernel: Failed to initailize DAA, giving up... May 25 21:28:20 asterisk kernel: wcfxo: probe of 0000:00:0e.0 failed with error -5 ztcfg -vv says: Channel 01: FXS Kewlstart (Default) (Slaves...

...which is cheap but not featureful enough, and the Snom 190, which is about right, but neither of them support PoE. I'm particularly intereseted in the Snom 220 with the keypad expansion for our receptionist. Although, could you make a PoE split-out cable for the Snom 190? James Andrewartha DAA Sysadmin

On 04/28/2015 06:05 PM, Akemi Yagi wrote: > On Tue, Apr 28, 2015 at 3:10 PM, Johnny Hughes <johnny at centos.org> wrote: > >> CentOS is not approved for DOD use. In fact, CentOS is not now, nor has >> it ever been *certified* for anything. Certifications require people to >> PAY to certify a product. >> >> Specifically, EAL4 Certification, a requirement

...631 365 67 164 455 491 KAA 603 1208 170 157 68 495 922 NAA 60 110 10 7 44 51 94 DAA 183 802 41 62 26 166 263 CAA 58 12 58 1 1 23 8 TAA 451 468 201 90 131 3...

...one 0 (United States / North America) Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America) ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 201 Failed to initailize DAA, giving up... wcfxo: probe of 0000:02:01.0 failed with error -5 ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 177 wcfxo: DAA mode is 'FCC' Found a Wildcard FXO: Generic Clone Registered tone zone 0 (United States / North America) Registered tone zone 0 (United Stat...

...rking for the past week now. this is what I've done: installed asterisk: make clean make linux 26 (for fedora core 2) make install installed zaptel: make clean make make install did a modprobe zaptel, and wcfxo got this in /var/log/messages: PCI: found IRQ 11 for device 0000:00:0f.0 wcfxo: daa mode is 'FCC' found a wildcard fxo: wildcard x101p ... in zaptel.conf: fxsks=1-2 in zapata.conf: signalling = fxs_ks channel => 1 channel => 2 yet when i run asterisk, the zap show channels command doesn't work. in a previous thread they mentioned this is because some chan_za...

I've had a few problems with my system holding the line after a call has been made, just now I rebooted and noticed the following in /var/log/messages Aug 13 17:23:15 Sheriff kernel: wcfxo: DAA mode is 'FCC' in the file wcfxo.c the following structure is initialised as below which would suggest that FCC is wrong for France or pretty well all of Europe. static struct fxo_mode { char *name; int ohs; int act; int dct; int rz; int rt;...

When I get a SIP call, I get the following error: *CLI> NOTICE[1133718080]: File chan_sip.c, Line 1768 (process_sdp): Content is 'multipart/mixed;boundary="unique-boundary-1"', not 'application/sdp' WARNING[1225991360]: File pbx.c, Line 1154 (pbx_extension_helper): No application '' for extension (incoming, 5147771111, 1) == Spawn extension (incoming,

Hi! I've bought a Wildcard X101P card to play a bit with asterisk. I'm just trying to place a call to a number, wait until the receiver takes the call, and then play one of the .gsm sound files. I'm in France, so first I tried modprobing wcfxo with opermode=1, but the DAA mode remained FCC, so I changed the opermode variable in wcfxo.c to 1 by hand and recompiled & reinstalled the driver. Now it says that it's using the DAA mode CTR21. I've also put in zapata.conf: signalling=fxs_ks context=default channel => 1 Now, to try the whole thing, I create...

Hi, in response to a previous posting regarding getting the x100p to work, I was told to run "zap show channels," but when i do i get "no such command 'zap'" There was a previous posting on this, but the guy never posted the solution. thanks, Imran

...s@macro-stdexten:10 Ring Dial(Agent/19|50|tw) Local/*14@agentlogin *14@agentloginoff:1 Up AgentCallbackLogin() Local/*14@agentlogin *14@agentloginoff:1 Up AgentCallbackLogin() Local/*13@agentlogin *13@agentloginoff:1 Up AgentCallbackLogin(||53@agent- SIP/53-31d3 *11@daa-office:1 Up (None) Local/*13@agentlogin *13@agentloginoff:1 Up AgentCallbackLogin(||56@agent- SIP/56-57e7 *11@daa-office:1 Up (None) SIP/32-e2a4 s@macro-stdexten:10 Ring Dial(Agent/56|50|tw) Agent/53 s@agent-phones:1 Down (None) Local...

...hdi restart", or "/etc/init.d/dahdi stop; /etc/init.d/dahdi start" without waiting more than about 10 seconds between the stop/start commands, I get the familiar error messages "DAHDI_CHANCONFIG failed on channel 1: No such device or address (6)", "Failed to initailize DAA, giving up" error, and massive "FXO PCI Master abort" errors in /var/log/messages. According to this thread, this error with X100P cards can be due to some strange wiring: https://issues.asterisk.org/view.php?id=14232 http://www.mail-archive.com/asterisk-dev at lists.digium.com/msg...

Hi, Does the passdb backend = ldapsam:"ldap://ldap.daa.com.au ldap://yaminon.daa.com.au", smbpasswd syntax actually do proper failover? I have a samba 3.0.9 server on FC2 that's been overheating (our aircon failed), and the ldap server doesn't start automatically. The logs said: [2006/01/10 08:55:47, 0] lib/smbldap.c:smbldap_open_connec...

...default 1 internal en default Zaptel Version: 1.4.12.1 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels to configure. # dmesg | grep -i fxo [ 43.066706] wcfxo: DAA mode is 'FCC' [ 43.066719] Found a Wildcard FXO: Generic Clone # cat zapata.conf [channels] language=en relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 ;gr...

...894f4 iRxBuffer1 = 0xff803e58 iTxBuffer1 = 0xff803ed8 ISR installed OK port: 1 port_type: O indicate that asterisk is detect two FXO port: 2 port_type: O port: 3 port_type: - port: 4 port_type: - port: 5 port_type: - port: 6 port_type: - port: 7 port_type: - port: 8 port_type: - Testing for DAA... VoiceDAA System: 04 ISO-Cap is now up, line side: 03 rev 06 Module 0: Installed -- AUTO FXO (FCC mode) Testing for DAA... VoiceDAA System: 04 ISO-Cap is now up, line side: 03 rev 06 Module 1: Installed -- AUTO FXO (FCC mode) Found: Blackfin STAMP (8 modules) wcfxs_init_ok = 1 Registered...

...d the optimum model and number of clusters changed with each change to the scale of the data (though in no obvious pattern). >From my perspective the normalized values would be preferable because when there are missing data they could be normalized to the number of characters or which there are daa in both members of the pair. Any help with this would be greatly appreciated. Barry Hall -- View this message in context: http://n4.nabble.com/positive-log-likelihood-and-BIC-values-from-mCLUST-analysis-tp1008356p1008356.html Sent from the R help mailing list archive at Nabble.com.

Hi I'm a little lost on how to set things up with the two FXO cards I have: I want card #2 to dial a number when a call comes in on card #1. Using the following configuration, card #1 picks up the line and remains silent, instead of dialing out through card #2. Anybody knows what's wrong? --------- /etc/zaptel.conf --------- # Zaptel Configuration File # fxsks=1,2 loadzone=fr

Hi All, I have followed below steps to enable echo cancellation. # cd /usr/src # wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2 # tar xjf linux-2.6.28.tar.bz2 # tar zxvf dahdi-linux-2.1.0.4.tar.gz # ln -s /usr/src/dahdi-linux-2.1.0.4 /usr/src/dahdi # mkdir /usr/src/dahdi/drivers/staging # cp -fR /usr/src/linux-2.6.28/drivers/staging/echo /usr/src/dahdi/drivers/staging # sed -i