search for: d161

Hi, On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18, I inserted a new Digium HA8 + B400M card. My usual installation fails. I can see it listed : # lspci -n | grep d161 01:0b.0 0200: d161:8007 (rev 11) # lspci -vn 01:0b.0 0200: d161:8007 (rev 11) Subsystem: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at fe5fe800 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 20020000 [disabled] [size=12...

...Here is the output of /var/log/syslog kernel: [ 3821.982893] Uhhuh. NMI received for unknown reason 20. kernel: [ 3821.982938] Do you have a strange power saving mode enabled? kernel: [ 3821.982964] Dazed and confused, but trying to continue dahdi_hardware pci:0000:04:08.0 wct4xxp+ d161:0420 Wildcard TE420 (4th Gen) pci:0000:06:08.0 wct4xxp+ d161:0420 Wildcard TE420 (4th Gen) pci:0000:08:02.0 wct4xxp+ d161:0410 Wildcard TE410P (3rd Gen) -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-user...

...t4xxp.o failed /lib/modules/2.4.21-32.0.1.ELsmp/misc/wct4xxp.o: insmod wct4xxp failed [root@asterisk1 src]# I've read lspci should show the card as something like Communication controller: Xilinx Corporation, but on my system it looks like this: 02:08.0 Communication controller: Unknown device d161:0410 (rev 02) lspci -v says: 02:08.0 Communication controller: Unknown device d161:0410 (rev 02) Flags: bus master, medium devsel, latency 32, IRQ 52 Memory at dd200000 (32-bit, non-prefetchable) [size=128] and there is no other device using IRQ 52. [root@asterisk1 src]# cat /pro...

Hi, I have a fresh install of CentOS 5.5, with a minimal GNOME desktop. I configured RPMForge as third party repo. I updated everything first, then installed flash-plugin. (And yes, I restarted Firefox... :oD). All I see when I try to see some things Flash on the Internet, like Youtube or the likes, I get... nothing. The space remains white. Sometimes a black square will appear, sometimes it

...al serial parameters. You can see how I loaded and unloaded the card for several times - http://asteriskpbx.ru/pastebin/11 lspci can detect the card: 03:08.0 Communication controller: Digium, Inc. Device 0220 (rev 02) dahdi_hardware also: astpbx ~ # dahdi_hardware pci:0000:03:08.0 wct4xxp+ d161:0220 Wildcard TE220 (4th Gen) astpbx ~ # But dahdi_tool does not show the card and dahdi_cfg gives DAHDI_SPANCONFIG failed on span 1: Invalid argument (22) System info is provided here - http://asteriskpbx.ru/pastebin/12 Please advise. -- Maxim Litnitskiy http://asteriskpbx.ru http://asterisk-sup...

...sees is, but I cannot get it working pbx:~# zaptel_hardware Argument "IRQ" isn't numeric in numeric comparison (<=>) at /usr/local/share/perl/5.8.8/Zaptel/Span.pm line 114. usb:005/002 xpp_usb- e4e4:1131 Astribank-8/16 USB-firmware pci:0000:04:00.0 wcte12xp+ d161:0120 Wildcard TE12xP In the Astribank line (module part) there is a "-" sign after the module name (while the TE120P has a "+" sign). Does that mean anything? genzaptelcong doesn't generate any config for the Astribank. Can anyone send a copy of their working Astribank se...

Hello R-community, I am trying to populate a column (doy) in a large dataset with the first column number that exceeds the value in another column (thold) using the 'apply' function. Sample data: pt D1 D17 D33 D49 D65 D81 D97 D113 D129 D145 D161 D177 D193 D209 D225 D241 D257 1 39177 0 0 0 0 0 0 0 0 0.4336 0.4754 0.5340667 0.5927334 0.6514 0.6966 0.5900 0.5583 0.5676 2 39178 0 0 0 0 0 0 0 0 0.3420 0.4543 0.5397666 0.6252333 0.7107 0.7123 0.5591 0.4617 0.4206 3 39164 0 0 0 0 0 0 0...

...I) Card 0 Span 1 OK 1 0 2938622 ESF B8ZS 0 db (CSU)/0-133 feet (DSX-1) I am leaning towards a misconfiguration on the span on the switch side but here is my setup. Can anyone point me in the right direction? # dahdi_hardware pci:0000:06:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen) /etc/dahdi/system.conf # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource span=1,1,0,esf,b8zs # termtype: unknown bchan=1-23 dchan=24 echocanceller=mg2,1-23 /etc/asterisk/chan_dahdi [channels] language=en context=Incoming-Pri switch...

lspci | grep Digium 03:05.0 Ethernet controller: Digium, Inc. Wildcard TE122 single-span T1/E1/J1 card (rev 11) dahdi_scan So I have a card in a box - lspci shows it... dahdi_scan reports nothing. Is my card dead? Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm using revision 6822 of Dahdi Tools. # dahdi_hardware pci:0000:05:06.0 wcb4xxp+ d161:b410 Digium Wildcard B410P # asterisk -rx "dahdi show version" DAHDI Version: 2.2.0.2 Echo Canceller: OSLEC # cat /etc/dahdi/genconf_parameters ... pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 NT SPAN/4 NT # dahdi_genconf...

Hello, I am trying to install my E1 card to make a conection with an Ericsson MD-110 PBX. I installed dahdi drivers as: dahdi_hardware pci:0000:04:08.0 wcte12xp- d161:8000 Wildcard TE121 ran dahdi_genconf and it created all my e1 ports. On the other side i also configured the pbx to communicate with TE121. On ericsson side, i have no error messages. On asterisk side, no error messages. But when i try to create a dahdi trunk, and dial it from asterisk , no call c...

Hello I have recently configured TDM400P with four FXO ports. My next requirement is to configure for E1 line. which contain 30 phone lines and 2 for signalling information. The problem is I dont want to go for E1 line directly .....Is it possible to get simulation for E1 line ... so that i can develop a system for an E1 line. -- Best Regards Shakeel Abbas

...ction [8086:10d3] 08:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 02) 09:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 10) 0a:01.0 ISDN controller [0204]: Digium, Inc. Wildcard B410 quad-BRI card [d161:b410] (rev 01) ... I specified the following in my system.conf in /etc/dahdi: loadzone = nl defaultzone = nl span = 1,1,0,ccs,ami bchan = 1,2 hardhdlc = 3 I loaded the driver using "sudo modprobe wcb4xxp." Next I ran "dahdi_cfg -vv" which returns: "DAHDI Tools Version -...

...e automatically at boot. Shall I find an /etc/init.d/dahdi file or equivalent ? If positive which command produces this file ? I would expect dahdi-linux or dahdi packages to install these file. > Waht hardware device do you > have? > # dahdi_hardware pci:0000:04:05.0 wctdm24xxp+ d161:8007 HA8-0000 > > -- > Tzafrir Cohen > icq#16849755 jabber:tzafrir.cohen at xorcom.com > +972-50-7952406 mailto:tzafrir.cohen at xorcom.com > http://www.xorcom.com > > -- > ___________________________________________________________...

...>lsppci: *0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface* 11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) > dahdi_hardware: pci:0000:0a:00.0 wctdm- e159:0001 Wildcard TDM400P REV E/F pci:0000:11:00.0 wcb4xxp+ d161:b410 Digium Wildcard B410P As you can see, it seems that wctdm driver is not loaded (minus sign beside wctdm) but if I restart dahdi, it loads it correctly: Loading DAHDI hardware modules: wctdm: [ OK ] wcb4xxp:...

Hello, I would like to double check what Echo Cancellation my Digium Card uses. I thought I bought the little more expensive card that integrates EchoCancellation. How can I check? root at sn1:~# zaptel_hardware pci:0000:0b:08.0 wcte12xp+ d161:8000 Wildcard TE121 root at sn1:~# ztcfg -v Zaptel Version: SVN-branch-1.4-r4309 Echo Canceller: MG2 Is MG2 the correct one that I am supposed to use? Isn't there something better? Best regards, Loic Didelot. -- Lo?c DIDELOT MIXvoip S.a. ldidelot at mixvoip.com http://www.mixvoip.com

...00001f00 wct4xxp 0000:02:00.0: Reg 8: 0x00000000 wct4xxp 0000:02:00.0: Reg 9: 0x00000000 wct4xxp 0000:02:00.0: Reg 10: 0xd0100028 IRQ 16/wct2xxp: IRQF_DISABLED is not guaranteed on shared IRQs wct4xxp 0000:02:00.0: Found a Wildcard: Wildcard TE210P dahdi_hardware: pci:0000:02:00.0 wct4xxp+ d161:0210 Wildcard TE210P As I think, it's really Digium TE210P. But I don't think, it's a pci card problem because call drops exist only on outgoing calls and 98% DIDs is mobile phone numbers. Any suggestions how to see this frame and who was the sender?

...the internet to asterisk then to ZAP/g1 the pabx can see the ring and I can pick up the phone I can hear the other end, but they can't hear me. I don't believe its a firewall issue as I can't dial from the pabx okay some print outs # zaptel_hardware pci:0000:05:02.0 wctdm24xxp+ d161:8005 Wildcard TDM410P # ztcfg -vv Zaptel Version: 1.4.11 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewl...

...sitive which command produces this file ? > > I would expect dahdi-linux or dahdi packages to install these file. > > > > > > > Waht hardware device do you > > > have? > > > > > > > # dahdi_hardware > > pci:0000:04:05.0 wctdm24xxp+ d161:8007 HA8-0000 > > Traditionally dahdi has been shipped with a modprobe.d configuration > file to blacklist all of the PCI cards. This was because the order in > which they were loaded was not well-defined. > > This is irrelevant on a system with a single device. And anyway, > i...

I enabled it yesterday and that greatly reduced memory pressure. Current volume info: -8<-- Volume Name: cluster_data Type: Distributed-Replicate Volume ID: a8caaa90-d161-45bb-a68c-278263a8531a Status: Started Snapshot Count: 0 Number of Bricks: 45 x (2 + 1) = 135 Transport-type: tcp Bricks: Brick1: clustor00:/srv/bricks/00/d Brick2: clustor01:/srv/bricks/00/d Brick3: clustor02:/srv/bricks/00/q (arbiter) [...] Brick133: clustor01:/srv/bricks/29/d Brick134: clustor02...