search for: current_pending_sector

...problem but with sda: > > 1) First run badblocks reports 28 badblocks on disk > 2) Second run badblocks reports 32 badblocks > 3) Third reports 102 badblocks > 4) Last run reports 92 badblocks. > > > Running smartctl after the last badblocks check I've noticed that > Current_Pending_Sector was 32 (not 92 as badblocks found). > > To force sector reallocation I've filled the disk up to 100%, runned again > badblocks and 0 badblocks found. > Running again smartctl, Current_Pending_Sector 0 but Reallocated_Event > Count = 0. > > Why each consecutive run of badblo...

...d data and say its OK. many(most?) drives won't actually remap to a bad sector until you write new data over that block number, since they don't want to copy bad data without any way of telling the OS the data is invalid. these pending remaps are listed under smart parameter 197 Current_Pending_Sector -- john r pierce, recycling bits in santa cruz

...strange behaviour. On sdb there are not problem but with sda: 1) First run badblocks reports 28 badblocks on disk 2) Second run badblocks reports 32 badblocks 3) Third reports 102 badblocks 4) Last run reports 92 badblocks. Running smartctl after the last badblocks check I've noticed that Current_Pending_Sector was 32 (not 92 as badblocks found). To force sector reallocation I've filled the disk up to 100%, runned again badblocks and 0 badblocks found. Running again smartctl, Current_Pending_Sector 0 but Reallocated_Event Count = 0. Why each consecutive run of badblocks reports different results?...

...s=4 UUID=942f512e:2db8dc6c:71667abc:daf408c3 /proc/mdstat: Personalities : [raid10] md127 : active raid10 sdf1[2](F) sdg1[3] sde1[1] sdd1[0] 1949480960 blocks super 1.2 512K chunks 2 near-copies [4/3] [UU_U] bitmap: 15/15 pages [60KB], 65536KB chunk smartctl reports this for sdf: 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 6 So it's got 6 bad blocks, 1 pending for remapping. Can I clear the error and rebuild? (It's not clear what commands would do that.) Or should I bu...

...Always - 82 193 Load_Cycle_Count 0x0032 186 186 000 Old_age Always - 44531 194 Temperature_Celsius 0x0022 098 083 000 Old_age Always - 49 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always - 1423 198 Offline_Uncorrectable 0x0030 196 196 000 Old_age Offline - 700 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 001 001 000...

...- 15 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 26 194 Temperature_Celsius 0x0022 032 053 000 Old_age Always - 32 (0 21 0 0 0) 195 Hardware_ECC_Recovered 0x001a 103 099 000 Old_age Always - 6218970 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged I have removed m...

...c3 > > /proc/mdstat: > Personalities : [raid10] > md127 : active raid10 sdf1[2](F) sdg1[3] sde1[1] sdd1[0] > 1949480960 blocks super 1.2 512K chunks 2 near-copies [4/3] [UU_U] > bitmap: 15/15 pages [60KB], 65536KB chunk > > smartctl reports this for sdf: > 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always > - 1 > 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline > - 6 > > So it's got 6 bad blocks, 1 pending for remapping. > > Can I clear the error and rebuild? (It's not clear what commands...

...Always - 10 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 28 194 Temperature_Celsius 0x0022 121 115 000 Old_age Always - 31 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old...

..._FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 440801014 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_ag...

...der the rug that it is forced to admit to normal user space programs (e.g. badblocks) that there are bad sectors, it?s because the spare sector pool is full. At that point, the only safe remediation is to replace the disk. > Running smartctl after the last badblocks check I've noticed that Current_Pending_Sector was 32 (not 92 as badblocks found). SMART is allowed to lie to you. That?s why there?s the RAW_VALUE column, yet there is no explanation in the manual as to what that value means. The reason is, the low-level meanings of these values are documented by the drive manufacturers. ?92? is not necess...

...ways - 4026 193 Load_Cycle_Count 0x0012 097 097 050 Old_age Always - 4026 194 Temperature_Celsius 0x0002 183 183 000 Old_age Always - 30 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 10 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 367 SMART Error Log Version: 1 ATA Error Count: 431 (device...

...308 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 308 194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Lifetime Min/Max 22/51) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 dmesg | grep sda EXT3-fs warning (device sda5): ext3_unlink: De...

...rature_Cel 0x0022 068 062 045 Old_age Always - 32 (Lifetime Min/Max 30/34) 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 25 0 0) 195 Hardware_ECC_Recovered 0x001a 065 056 000 Old_age Always - 173161329 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old...

I'm looking to do a bit more monitoring of my 3ware 9550 with smartd, and wanted to see what others were doing with smart for monitoring 3ware hardware. Do you have the smartd.conf configured to test, or simply monitor health status? Are you monitoring the drive as centos sees it (/dev/sdX) or are you using the 3ware /dev/twaX for monitoring? Opinions and discussions are welcome :-P --

...e Always - 13 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 117 109 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old...

Hi, Recently I've decided to play with gjournal. Main reason was a promise of avoiding full fsck check after unclean shutdown. I've successfuly configured gjournal on existing filesystems (all UFS). And then it happened - my system had a power failure. After boot, it forced me to run fsck manualy. Nothing special, I did it before... But this time it failed on gjournaled disks.

...- 23 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 184 194 Temperature_Celsius 0x0022 134 108 000 Old_age Always - 18 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 051...

...- 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 16 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 4551 194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 21 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old...

...- 82 >193 Load_Cycle_Count 0x0032 186 186 000 Old_age Always > - 44531 >194 Temperature_Celsius 0x0022 098 083 000 Old_age Always > - 49 >196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always > - 0 >197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always > - 1423 >198 Offline_Uncorrectable 0x0030 196 196 000 Old_age Offline > - 700 >199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always > - 0 >200 Multi_Zone_Error_Rate 0x0008 001 0...

...- 257 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 308088 194 Temperature_Celsius 0x0022 121 089 000 Old_age Always - 26 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 051...