search for: cptone

...all-failure 0 controller E1 2 framing NO-CRC4 clock source line primary pri-group timeslots 1-31 interface Serial2:15 no ip address isdn switch-type primary-qsig isdn overlap-receiving T302 2000 isdn incoming-voice modem isdn T310 40000 isdn send-alerting no cdp enable voice-port 2:D cptone BR I configured my /etc/zapata.conf: span=1,0,0,ccs,hdb3 nethdlc=1-15 Any clue? Thanks in advance, Daniel

Ok, very frustrated after spending most of the day onthe * irc channel with little to no help. Mostly just a bunch of crap about being a newbie, going and reading voip-info.org. etc. Despite me doing all that already. My situation is not good but here it is. Hurricane came through, power spikes killed PBX. Just trying to replace it affordable and possibly with a few more features. I am using *

...! ! ! ! ! ! ! ! ! interface FastEthernet0/0 ip address 192.168.0.206 255.255.255.0 speed 100 full-duplex ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! ip classless no ip http server ! ! ! ! control-plane ! ! voice-port 2/0 input gain 5 echo-cancel coverage 32 cptone PA timeouts interdigit 5 description Extension 2700 station-id name 2700 ! voice-port 2/1 ! voice-port 2/2 ! voice-port 2/3 ! voice-port 2/4 ! voice-port 2/5 ! voice-port 2/6 ! voice-port 2/7 ! voice-port 2/8 ! voice-port 2/9 ! voice-port 2/10 ! voice-port 2/11 ! voice-port 2/12 ! voice-port 2/1...

...duplex full speed auto ! ip classless ip route 0.0.0.0 0.0.0.0 192.168.0.1 no ip http server ! ! ! call rsvp-sync ! voice-port 0:0 echo-cancel coverage 16 compand-type a-law timeouts interdigit 2 ! voice-port 3:D compand-type a-law ! voice-port 1:D input gain -6 compand-type a-law cptone ZA timeouts interdigit 4 ! ! mgcp profile default ! dial-peer voice 1 pots destination-pattern .T port 0:0 forward-digits all ! gateway resource threshold high 100 low 95 ! sip-ua sip-server ipv4:192.168.0.149 ! alias exec sc show call active voice brief alias exec scao show call ac v b...

Guys. I need some advice on some h323 issues. I need to test connectivity from Asterisk to a Cisco AS5300 that has PSTN lines and to cisco 3600 voip routers. H323 needs to be used here but I was wondering if anybody has linked Asterisk to these Cisco routers before? Thank you for any pointers.

...tus isdn switch-type primary-net5 isdn incoming-voice data isdn bchan-number-order ascending no cdp enable ! ip http server ip classless ip route 0.0.0.0 0.0.0.0 192.168.12.100 ! ! call rsvp-sync ! voice-port 1/0:15 echo-cancel coverage 32 playout-delay nominal 150 playout-delay minimum low cptone PE bearer-cap 3100Hz ! ! dial-peer voice 10 pots destination-pattern .T no digit-strip direct-inward-dial port 1/0:15 forward-digits all ! gateway timer receive-rtcp 5 ! -------------------------------------------- * Running Asterisk Version : Asterisk 1.4.23.1 * Asterisk Source Version :...

I'm experimenting (using for the first time) with using a cisco3620 to connect to the PSTN via a channelised E1 interface, with * handling all of the SIP calls. If anyone has any installation tips / help / documentation I would be most appreciative :) However, my first question is this: when I am in the setup, I see the following: Current interface summary Controller Timeslots